Subversion Repositories svn LFS-FR

Compare Revisions

Ignore whitespace Rev 6611 → Rev 6612

/trunk/clfs/final-system/common/gmp.xml
44,25 → 44,29
<screen os="b"><userinput>CC="gcc -isystem /usr/include" \
CXX="g++ -isystem /usr/include" \
LDFLAGS="-Wl,-rpath-link,/usr/lib:/lib" \
./configure --prefix=/usr --enable-cxx</userinput></screen>
./configure --prefix=/usr --enable-cxx \
--docdir=/usr/share/doc/gmp-&gmp-version;</userinput></screen>
 
<para os="c">Compilez le paquet&nbsp;:</para>
 
<screen os="d"><userinput>make</userinput></screen>
 
<important os="e">
<para>La suite de tests pour GMP est considérée comme critique. Ne la
sautez sous aucun prétexte.</para>
</important>
<para os="e">Construisez la documentation HTML&nbsp;:</para>
 
<para os="f">Testez les résultats&nbsp;:</para>
<screen os="f"><userinput>make html</userinput></screen>
 
<screen os="g"><userinput remap="test">make check</userinput></screen>
<para os="g">Testez les résultats&nbsp;:</para>
 
<para os="h">Installez le paquet&nbsp;:</para>
<screen os="h"><userinput remap="test">make check</userinput></screen>
 
<screen os="i"><userinput>make install</userinput></screen>
<para os="i">Installez le paquet&nbsp;:</para>
 
<screen os="j"><userinput>make install</userinput></screen>
 
<para os="k">Installez la documentation&nbsp;:</para>
 
<screen os="l"><userinput>make install-html</userinput></screen>
 
</sect2>
 
<sect2 id="contents-gmp" role="content">
70,9 → 74,11
 
<segmentedlist>
<segtitle>Bibliothèques installées</segtitle>
<segtitle>Répertoire installé</segtitle>
 
<seglistitem>
<seg>libgmp.[a,so], libgmpxx.[a,so], libmp.[a,so]</seg>
<seg>libgmp.[a,so], libgmpxx.[a,so]</seg>
<seg>/usr/share/doc/gmp-&gmp-version;</seg>
</seglistitem>
</segmentedlist>
 
101,16 → 107,6
</listitem>
</varlistentry>
 
<varlistentry id="libmp">
<term><filename class="libraryfile">libmp</filename></term>
<listitem>
<para>Contient la bibliothèque de compatibilité Berkeley MP.</para>
<indexterm zone="ch-system-gmp libmp">
<primary sortas="c-libmp">libmp</primary>
</indexterm>
</listitem>
</varlistentry>
 
</variablelist>
 
</sect2>
/trunk/clfs/final-system/common/gettext.xml
31,7 → 31,7
 
<para os="a">Préparez la compilation de Gettext&nbsp;:</para>
 
<screen os="b"><userinput>./configure --prefix=/usr</userinput></screen>
<screen os="b"><userinput>./configure --prefix=/usr --docdir=/usr/share/doc/gettext-&gettext-version;</userinput></screen>
 
<para os="c">Compilez le paquet&nbsp;:</para>
 
59,10 → 59,11
<seg>autopoint, config.charset, config.rpath, envsubst, gettext,
gettext.sh, gettextize, hostname, msgattrib, msgcat, msgcmp, msgcomm,
msgconv, msgen, msgexec, msgfilter, msgfmt, msggrep, msginit, msgmerge,
msgunfmt, msguniq, ngettext, recode-sr-latin et xgettext</seg>
msgunfmt, msguniq, ngettext, recode-sr-latin, xgettext</seg>
<seg>libasprintf.[a,so], libgettextlib.so, libgettextpo.[a,so],
libgettextsrc.so, and preloadable_libintl.so</seg>
<seg>/usr/lib/gettext, /usr/share/doc/gettext, /usr/share/gettext</seg>
libgettextsrc.so, preloadable_libintl.so</seg>
<seg>/usr/lib/gettext, /usr/share/doc/gettext-&gettext-version;,
/usr/share/gettext</seg>
</seglistitem>
</segmentedlist>
 
81,7 → 82,7
</indexterm>
</listitem>
</varlistentry>
 
<varlistentry id="config.charset">
<term><command>config.charset</command></term>
<listitem>
/trunk/clfs/final-system/common/diffutils.xml
25,13 → 25,20
<sect2 role="installation">
<title>Installation de Diffutils</title>
 
<para os="s1">Corrigez un bogue qui empêche les fichiers de locale de
s'installer&nbsp;:</para>
 
<screen os="s2"><userinput>sed -i 's:= @mkdir_p@:= /bin/mkdir -p:' po/Makefile.in.in</userinput></screen>
 
<para os="a">Préparez la compilation de Diffutils&nbsp;:</para>
 
<screen os="b"><userinput>./configure --prefix=/usr</userinput></screen>
 
<para os="s1">Diffutils veut <command>ed</command> comme éditeur. Le sed suivant va nous permettre d'utiliser vim&nbsp;:</para>
<para os="s3">Diffutils veut <command>ed</command> comme éditeur de <command>sdiff</command>.
Le <command>sed</command> suivant passe l'éditeur par défaut à
<command>vi</command>&nbsp;:</para>
 
<screen os="s2"><userinput>sed -i 's@\(^#define DEFAULT_EDITOR_PROGRAM \).*@\1"vi"@' lib/config.h</userinput></screen>
<screen os="s4"><userinput>sed -i 's@\(^#define DEFAULT_EDITOR_PROGRAM \).*@\1"vi"@' lib/config.h</userinput></screen>
 
<para os="c">Compilez le paquet&nbsp;:</para>
 
54,7 → 61,7
<segtitle>Programmes installés</segtitle>
 
<seglistitem>
<seg>cmp, diff, diff3 et sdiff</seg>
<seg>cmp, diff, diff3, sdiff</seg>
</seglistitem>
</segmentedlist>
 
/trunk/clfs/final-system/common/kbd.xml
30,22 → 30,57
<screen os="b"><userinput>PKG_CONFIG_PATH="/tools/lib/pkgconfig" \
./configure --prefix=/usr --disable-vlock --enable-optional-progs</userinput></screen>
 
<para os="c">Compilez le paquet&nbsp;:</para>
<screen os="d"><userinput>make</userinput></screen>
<variablelist os="c">
<title>Voici la signification des nouvelles options de configuration&nbsp;:</title>
 
<para os="e">Ce paquet n'est pas fourni avec une suite de tests.</para>
<varlistentry>
<term><envar>PKG_CONFIG_PATH</envar></term>
<listitem>
<para>Utilise pkg-config pour savoir là où se trouve les métadonnées
de la bibliothèque de test construite au <xref linkend="ch-temp-system-check"/>.</para>
</listitem>
</varlistentry>
 
<para os="f">Installez le paquet&nbsp;:</para>
<varlistentry>
<term><envar>--disable-vlock</envar></term>
<listitem>
<para>Empêche Kbd d'essayer de construire le programme
<command>vlock</command> qui exige Linux-PAM.</para>
</listitem>
</varlistentry>
 
<screen os="g"><userinput>make install</userinput></screen>
<varlistentry>
<term><envar>--enable-optional-progs</envar></term>
<listitem>
<para>Installe plusieurs programmes supplémentaires.</para>
</listitem>
</varlistentry>
 
<para os="h">Certains programmes de Kbd sont utilisés par des scripts du paquet CLFS-Bootscripts. Comme il se peut que
</variablelist>
 
<para os="d">Compilez le paquet&nbsp;:</para>
 
<screen os="e"><userinput>make</userinput></screen>
 
<para os="f">Pour tester les résultats, lancez&nbsp;:</para>
 
<screen os="g"><userinput remap="test">make check</userinput></screen>
 
<para os="h">Installez le paquet&nbsp;:</para>
 
<screen os="i"><userinput>make install</userinput></screen>
 
<para os="j">Certains programmes de Kbd sont utilisés par des scripts du paquet CLFS-Bootscripts. Comme il se peut que
<filename class="directory">/usr</filename> ne soit pas disponibles lors des premières étapes du démarrage, ces binaires
doivent être sur la partition racine&nbsp;:</para>
 
<screen os="i"><userinput>mv -v /usr/bin/{kbd_mode,dumpkeys,loadkeys,openvt,setfont,setvtrgb} /bin</userinput></screen>
<screen os="k"><userinput>mv -v /usr/bin/{kbd_mode,dumpkeys,loadkeys,openvt,setfont,setvtrgb} /bin</userinput></screen>
 
<para os="l">Installez la documentation&nbsp;:</para>
 
<screen os="m"><userinput>mkdir -v /usr/share/doc/kbd-&kbd-version;
cp -R -v docs/doc/* /usr/share/doc/kbd-&kbd-version;</userinput></screen>
 
</sect2>
 
<sect2 id="contents-kbd" role="content">
61,8 → 96,9
(lien vers psfxtable), psfgettable (lien vers psfxtable), psfstriptable
(lien vers psfxtable), psfxtable, resizecons, setfont, setkeycodes,
setleds, setmetamode, setvtrgb, showconsolefont, showkey,
unicode_start, et unicode_stop</seg>
unicode_start, unicode_stop</seg>
<seg>/usr/share/consolefonts, /usr/share/consoletrans,
/usr/share/doc/kbd-&kbd-version;,
/usr/share/keymaps, /usr/share/unimaps</seg>
 
</seglistitem>
199,7 → 235,7
<varlistentry id="psfaddtable">
<term><command>psfaddtable</command></term>
<listitem>
<para>Un lien vers <command>psfxtable</command></para>
<para>Ajoute une table de caractères Unicode à une police de console</para>
<indexterm zone="ch-system-kbd psfaddtable">
<primary sortas="b-psfaddtable">psfaddtable</primary>
</indexterm>
209,7 → 245,7
<varlistentry id="psfgettable">
<term><command>psfgettable</command></term>
<listitem>
<para>Un lien vers <command>psfxtable</command></para>
<para>Extrait la table de caractères Unicode d'une police de console</para>
<indexterm zone="ch-system-kbd psfgettable">
<primary sortas="b-psfgettable">psfgettable</primary>
</indexterm>
219,7 → 255,8
<varlistentry id="psfstriptable">
<term><command>psfstriptable</command></term>
<listitem>
<para>Un lien vers <command>psfxtable</command></para>
<para>Supprime la table de caractères Unicode embarquée de la police
de console</para>
<indexterm zone="ch-system-kbd psfstriptable">
<primary sortas="b-psfstriptable">psfstriptable</primary>
</indexterm>
/trunk/clfs/final-system/common/cloog.xml
32,7 → 32,7
 
<screen os="b"><userinput>CC="gcc -isystem /usr/include" \
LDFLAGS="-Wl,-rpath-link,/usr/lib:/lib" \
./configure --prefix=/usr --enable-shared</userinput></screen>
./configure --prefix=/usr --with-isl=system</userinput></screen>
 
<para os="s1">Appliquez un <command>sed</command> qui empêche une tentative
d'installation d'un fichier invalide&nbsp;:</para>
43,19 → 43,14
 
<screen os="d"><userinput>make</userinput></screen>
 
<important os="e">
<para>La suite de tests de CLooG est considérée comme critique.
Ne la sautez sous aucun prétexte.</para>
</important>
<para os="e">Testez les résultats&nbsp;:</para>
 
<para os="f">Testez les résultats&nbsp;:</para>
<screen os="f"><userinput remap="test">make check</userinput></screen>
 
<screen os="g"><userinput remap="test">make check</userinput></screen>
<para os="g">Installez le paquet&nbsp;:</para>
 
<para os="h">Installez le paquet&nbsp;:</para>
<screen os="h"><userinput>make install</userinput></screen>
 
<screen os="i"><userinput>make install</userinput></screen>
 
</sect2>
 
<sect2 id="contents-cloog" role="content">
/trunk/clfs/final-system/common/libtool.xml
54,7 → 54,7
<segtitle>Répertoires installés</segtitle>
 
<seglistitem>
<seg>libtool and libtoolize</seg>
<seg>libtool, libtoolize</seg>
<seg>libltdl.[a,so]</seg>
<seg>/usr/include/libltdl, /usr/share/libtool</seg>
</seglistitem>
/trunk/clfs/final-system/common/linux-headers.xml
8,25 → 8,38
<sect1 id="ch-system-linux-headers" role="wrap">
<?dbhtml filename="linux-headers.html"?>
 
<title>Linux-Headers-&linux-version;</title>
<title>En-têtes Linux-&linux-version2;</title>
 
<indexterm zone="ch-system-linux-headers">
<primary sortas="a-Linux-Headers">Linux-Headers</primary>
<primary sortas="a-En-têtes Linux">Linux-Headers</primary>
</indexterm>
 
<sect2 role="package">
<title/>
 
<para>Le noyau Linux contient une cible make qui installe des en-têtes du noyau
<para>Le noyau Linux contient une cible <command>make</command> qui installe des en-têtes du noyau
<quote>propres</quote>.</para>
 
</sect2>
 
<sect2 role="installation">
<title>Installation de Linux-Headers</title>
<title>Installation des en-têtes Linux</title>
 
<para os="a">Pour cette étape, vous aurez besoin de l'archive tar du noyau.</para>
<note os="a">
Pour cette étape, vous aurez besoin de déballer l'archive tar du noyau
(<filename>linux-&linux-version;.tar.xz</filename>) et
d'aller dans le répertoire des sources avant d'entrer les commandes de
cette page.</para>
</note>
 
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="../../bootable/x86/kernel.xml"
xpointer="xpointer(//*[@os='p1'])"/>
 
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="../../bootable/x86/kernel.xml"
xpointer="xpointer(//*[@os='p2'])"/>
 
<para os="b">Installez les fichiers d'en-tête du noyau&nbsp;:</para>
 
<screen os="c"><userinput>make mrproper
72,7 → 85,7
</sect2>
 
<sect2 id="contents-linux-headers" role="content">
<title>Contenu de Linux-Headers</title>
<title>Contenu des en-têtes Linux</title>
 
<segmentedlist>
<segtitle>En-têtes installées</segtitle>
/trunk/clfs/final-system/common/man-pages.xml
17,7 → 17,7
<sect2 role="package">
<title/>
 
<para>Le paquet Man-pages contient environ 1&nbsp;200 pages de manuel.</para>
<para>Le paquet Man-pages contient environ 2&nbsp;200 pages de manuel.</para>
 
</sect2>
 
/trunk/clfs/final-system/common/gcc.xml
30,19 → 30,11
 
<screen os="p2"><userinput>patch -Np1 -i ../&gcc-branch_update-patch;</userinput></screen>
 
<para os="fix1">Appliquez une subsitution <command>sed</command> qui
<para os="fix1">Appliquez une substitution <command>sed</command> qui
supprimera l'exécution du script <command>fixincludes</command>&nbsp;:</para>
 
<screen os="fix2"><userinput>cp -v gcc/Makefile.in{,.orig}
sed 's@\./fixinc\.sh@-c true@' gcc/Makefile.in.orig > gcc/Makefile.in</userinput></screen>
<screen os="fix2"><userinput>sed -i 's@\./fixinc\.sh@-c true@' gcc/Makefile.in</userinput></screen>
 
<para os="d">Appliquez une substitution <command>sed</command> qui va supprimer l'installation de
<filename class="libraryfile">libiberty.a</filename>. La
version of <filename class="libraryfile">libiberty.a</filename> fournie par Binutils sera utilisée à la
place&nbsp;:</para>
 
<screen os="e"><userinput>sed -i 's/install_to_$(INSTALL_DEST) //' libiberty/Makefile.in</userinput></screen>
 
<para os="f">La documentation de GCC recommande de construire GCC en dehors
du répertoire source, c'est-à-dire dans un répertoire dédié&nbsp;:</para>
 
52,25 → 44,37
 
<para os="h">Préparez la compilation de GCC&nbsp;:</para>
 
<screen os="i"><userinput>CC="gcc -isystem /usr/include" \
<screen os="i"><userinput>SED=sed CC="gcc -isystem /usr/include" \
CXX="g++ -isystem /usr/include" \
LDFLAGS="-Wl,-rpath-link,/usr/lib:/lib" \
../gcc-&gcc-version;/configure --prefix=/usr \
--libexecdir=/usr/lib --enable-shared --enable-threads=posix \
--enable-__cxa_atexit --enable-c99 --enable-long-long \
--enable-clocale=gnu --enable-languages=c,c++ \
--libexecdir=/usr/lib --enable-threads=posix \
--enable-__cxa_atexit --enable-clocale=gnu --enable-languages=c,c++ \
--disable-multilib --disable-libstdcxx-pch \
--enable-cloog-backend=isl --disable-isl-version-check --with-system-zlib \
--enable-checking=release --enable-libstdcxx-time \
--disable-install-libiberty</userinput></screen>
--with-system-zlib --enable-checking=release --enable-libstdcxx-time</userinput></screen>
 
<variablelist os="i1">
<title>Voici la signification de la nouvelle option de configuration&nbsp;:</title>
 
<varlistentry>
<term><parameter>SED=sed</parameter></term>
<listitem>
<para>Ceci empêche un chemin codé en dur, vers
<filename>/tools/bin/sed</filename>, de figurer dans le programme
<command>fixincl</command>.</para>
</listitem>
</varlistentry>
 
</variablelist>
 
<para os="j">Compilez le paquet&nbsp;:</para>
 
<screen os="k"><userinput>make</userinput></screen>
 
<important os="l">
<para>Dans cette section, la suite de tests pour GCC est considérée
critique. Ne les sautez sous aucun prétexte.</para>
<para>Étant donné le rôle critique de GCC dans le bon fonctionnement
d'un système, les développeurs de CLFS recommandent fortement de lancer la
suite de tests.</para>
</important>
 
<para os="s1">Augmentez la taille de la pile avant de lancer les tests&nbsp;:</para>
99,22 → 103,27
 
<screen os="t"><userinput>make install</userinput></screen>
 
<para os="u">Quelques paquets s'attendent à ce que le préprocesseur C soit
<para os="u">Installez le fichier d'en-tête <filename class="headerfile">libiberty</filename>
exigée par certains paquets&nbsp;:</para>
 
<screen os="v"><userinput>cp -v ../gcc-&gcc-version;/include/libiberty.h /usr/include</userinput></screen>
 
<para os="w">Quelques paquets s'attendent à ce que le préprocesseur C soit
installé dans le répertoire
<filename class="directory">/lib</filename> Pour supporter ces
paquets, créez ce lien symbolique&nbsp;:</para>
 
<screen os="v"><userinput>ln -sv ../usr/bin/cpp /lib</userinput></screen>
<screen os="x"><userinput>ln -sv ../usr/bin/cpp /lib</userinput></screen>
 
<para os="w">Beaucoup de paquets utilisent le nom <command>cc</command>
<para os="y">Beaucoup de paquets utilisent le nom <command>cc</command>
pour appeler le compilateur C. Pour satisfaire ces paquets, créez un
lien symbolique&nbsp;:</para>
 
<screen os="x"><userinput>ln -sv gcc /usr/bin/cc</userinput></screen>
<screen os="z"><userinput>ln -sv gcc /usr/bin/cc</userinput></screen>
 
<para os="y">Enfin, déplacez un fichier mal placé&nbsp;:</para>
<para os="aa">Enfin, déplacez un fichier mal placé&nbsp;:</para>
 
<screen os="z"><userinput>mv -v /usr/lib/*gdb.py /usr/share/gdb/auto-load/usr/lib</userinput></screen>
<screen os="ab"><userinput>mv -v /usr/lib/*gdb.py /usr/share/gdb/auto-load/usr/lib</userinput></screen>
 
</sect2>
 
127,10 → 136,11
<segtitle>Répertoires installés</segtitle>
 
<seglistitem>
<seg>c++, cc (link to gcc), cpp, g++, gcc et gcov</seg>
<seg>libasan.[a,so], libgcc.a, libgcc_eh.a, libgcc_s.so, libgcov.a,
libgomp.[a,so], libmudflap.[a,so], libmudflapth.[a,so], libssp.[a,so],
libssp_nonshared.a, libstdc++.[a,so], libsupc++.a, and libtsan.[a,so]</seg>
<seg>c++, cc (lien vers gcc), cpp, g++, gcc, gcov</seg>
<seg>libasan.[a,so], libatomic.[a,so], libgcc.a, libgcc_eh.a, libgcc_s.so, libgcov.a,
libgomp.[a,so], libiberty.a, libitm.[a,so], liblto_plugin.so, libmudflap.[a,so], libmudflapth.[a,so],
libquadmath.[a,so], libssp.[a,so], libssp_nonshared.a, libstdc++.[a,so], libsupc++.a,
libtsan.[a,so]</seg>
<seg>/usr/include/c++, /usr/lib/gcc, /usr/share/gcc-&gcc-version;</seg>
</seglistitem>
</segmentedlist>
213,6 → 223,16
</listitem>
</varlistentry>
 
<varlistentry id="libatomic">
<term><filename class="libraryfile">libatomic</filename></term>
<listitem>
<para>Une bibliothèque d'exécution de support GCC pour les opérations
atomic non supportées par le matériel</para>
<indexterm zone="ch-system-gcc libatomic">
<primary sortas="c-libatomic*">libatomic*</primary>
</indexterm>
</listitem>
</varlistentry>
 
<varlistentry id="libgcc">
<term><filename class="libraryfile">libgcc</filename></term>
246,6 → 266,41
</listitem>
</varlistentry>
 
<varlistentry id="libiberty">
<term><filename class="libraryfile">libiberty</filename></term>
<listitem>
<para>Contient des routines utilisés par divers programmes GNU, dont
<command>getopt</command>, <command>obstack</command>,
<command>strerror</command>, <command>strtol</command> et
<command>strtoul</command></para>
<indexterm zone="ch-system-gcc libiberty">
<primary sortas="c-libiberty">libiberty</primary>
</indexterm>
</listitem>
</varlistentry>
 
<varlistentry id="libitm">
<term><filename class="libraryfile">libitm</filename></term>
<listitem>
<para>La bibliothèque GNU Transactional Memory, qui fournit un support
de transaction pour les accès à la mémoire d'un processus</para>
<indexterm zone="ch-system-gcc libitm">
<primary sortas="c-libitm*">libitm*</primary>
</indexterm>
</listitem>
</varlistentry>
 
<varlistentry id="liblto_plugin">
<term><filename class="libraryfile">liblto_plugin</filename></term>
<listitem>
<para>Bibliothèque d'exécution du greffon d'optimisation du temps des
liens de GCC</para>
<indexterm zone="ch-system-gcc liblto_plugin">
+ <primary sortas="c-liblto_plugin">liblto_plugin</primary>
+ </indexterm>
+ </listitem>
+ </varlistentry>
 
<varlistentry id="libmudflap">
<term><filename class="libraryfile">libmudflap</filename></term>
<listitem>
/trunk/clfs/final-system/common/groff.xml
43,14 → 43,6
 
<screen os="h"><userinput>make install</userinput></screen>
 
<para os="i">Quelques programmes de documentation, comme <command>xman</command>,
ne fonctionnent pas correctement sans les liens symboliques
suivants&nbsp;:</para>
 
<screen os="j"><userinput>ln -sv soelim /usr/bin/zsoelim
ln -sv eqn /usr/bin/geqn
ln -sv tbl /usr/bin/gtbl</userinput></screen>
 
</sect2>
 
<sect2 id="contents-groff" role="content">
61,13 → 53,12
<segtitle>Répertoires installés</segtitle>
 
<seglistitem>
<seg>addftinfo, afmtodit, chem, eqn, eqn2graph, gdiffmk,
geqn (lien vers eqn), grap2graph, grn, grodvi, groff, groffer, grog,
grolbp, grolj4, grops, grotty, gtbl (lien vers tbl), hpftodit, indxbib,
lkbib, lookbib, mmroff, neqn, nroff, pdfroff, pfbtops, pic, pic2graph,
post-grohtml, pre-grohtml, preconv, refer, roff2dvi, roff2html,
roff2pdf, roff2ps, roff2text, roff2x, soelim, tbl, tfmtodit, troff
et zsoelim (lien vers soelim)</seg>
<seg>addftinfo, afmtodit, chem, eqn, eqn2graph, gdiffmk, grap2graph,
grn, grodvi, groff, groffer, grog, grolbp, grolj4, grops, grotty,
hpftodit, indxbib, lkbib, lookbib, mmroff, neqn, nroff, pdfroff,
pfbtops, pic, pic2graph, post-grohtml, pre-grohtml, preconv, refer,
roff2dvi, roff2html, roff2pdf, roff2ps, roff2text, roff2x, soelim,
tbl, tfmtodit, troff</seg>
<seg>/usr/lib/groff, /usr/share/doc/groff-&groff-version;, /usr/share/groff</seg>
</seglistitem>
</segmentedlist>
143,16 → 134,6
</listitem>
</varlistentry>
 
<varlistentry id="geqn">
<term><command>geqn</command></term>
<listitem>
<para>Un lien vers <command>eqn</command></para>
<indexterm zone="ch-system-groff geqn">
<primary sortas="b-geqn">geqn</primary>
</indexterm>
</listitem>
</varlistentry>
 
<varlistentry id="grap2graph">
<term><command>grap2graph</command></term>
<listitem>
267,16 → 248,6
</listitem>
</varlistentry>
 
<varlistentry id="gtbl">
<term><command>gtbl</command></term>
<listitem>
<para>Un lien vers <command>tbl</command></para>
<indexterm zone="ch-system-groff gtbl">
<primary sortas="b-gtbl">gtbl</primary>
</indexterm>
</listitem>
</varlistentry>
 
<varlistentry id="hpftodit">
<term><command>hpftodit</command></term>
<listitem>
561,15 → 532,6
</indexterm>
</listitem>
</varlistentry>
<varlistentry id="zsoelim">
<term><command>zsoelim</command></term>
<listitem>
<para>Un lien vers <command>soelim</command></para>
<indexterm zone="ch-system-groff zsoelim">
<primary sortas="b-zsoelim">zsoelim</primary>
</indexterm>
</listitem>
</varlistentry>
 
</variablelist>
 
/trunk/clfs/final-system/common/mpfr.xml
33,26 → 33,22
<para os="a">Préparez la compilation de MPFR&nbsp;:</para>
 
<screen os="b"><userinput>CC="gcc -isystem /usr/include" \
LDFLAGS="-Wl,-rpath-link,/usr/lib:/lib" \
./configure --prefix=/usr --enable-shared \
--with-gmp=/usr</userinput></screen>
LDFLAGS="-Wl,-rpath-link,/usr/lib:/lib" \
./configure --prefix=/usr --with-gmp=/usr \
--docdir=/usr/share/doc/mpfr-&mpfr-version;</userinput></screen>
 
<para os="c">Compilez le paquet&nbsp;:</para>
 
<screen os="d"><userinput>make</userinput></screen>
 
<important os="e">
<para>La suite de tests de MPFR est considéré comme critique. Ne la sautez sous aucun prétexte.</para>
</important>
<para os="e">Testez les résultats&nbsp;:</para>
 
<para os="f">Testez les résultats&nbsp;:</para>
<screen os="f"><userinput remap="test">make check</userinput></screen>
 
<screen os="g"><userinput remap="test">make check</userinput></screen>
<para os="g">Installez le paquet&nbsp;:</para>
 
<para os="h">Installez les résultats&nbsp;:</para>
<screen os="h"><userinput>make install</userinput></screen>
 
<screen os="i"><userinput>make install</userinput></screen>
 
</sect2>
 
<sect2 id="contents-mpfr" role="content">
64,7 → 60,7
 
<seglistitem>
<seg>libmpfr.[a,so]</seg>
<seg>/usr/share/doc/mpfr</seg>
<seg>/usr/share/doc/mpfr-&mpfr-version;</seg>
</seglistitem>
</segmentedlist>
 
/trunk/clfs/final-system/common/less.xml
30,33 → 30,20
 
<screen os="b"><userinput>./configure --prefix=/usr --sysconfdir=/etc</userinput></screen>
 
<variablelist os="c">
<title>Voici la signification de l'option de configure&nbsp;:</title>
<para os="c">Compilez le paquet&nbsp;:</para>
 
<varlistentry>
<term><parameter>--sysconfdir=/etc</parameter></term>
<listitem>
<para>Cette option indique aux programmes créés par le paquet de
chercher leurs fichiers de configuration dans <filename
class="directory">/etc</filename>.</para>
</listitem>
</varlistentry>
</variablelist>
<screen os="d"><userinput>make</userinput></screen>
 
<para os="d">Compilez le paquet&nbsp;:</para>
<para os="e">Ce paquet ne fournit pas de suite de tests.</para>
 
<screen os="e"><userinput>make</userinput></screen>
<para os="f">Installez le paquet&nbsp;:</para>
 
<para os="f">Ce paquet ne fournit pas de suite de tests.</para>
<screen os="g"><userinput>make install</userinput></screen>
 
<para os="g">Installez le paquet&nbsp;:</para>
 
<screen os="h"><userinput>make install</userinput></screen>
 
<para os="i">Déplacez <command>less</command> vers
<para os="h">Déplacez <command>less</command> vers
<filename class="directory">/bin</filename>&nbsp;:</para>
 
<screen os="j"><userinput>mv -v /usr/bin/less /bin</userinput></screen>
<screen os="i"><userinput>mv -v /usr/bin/less /bin</userinput></screen>
 
</sect2>
 
67,7 → 54,7
<segtitle>Programmes installés</segtitle>
 
<seglistitem>
<seg>less, lessecho et lesskey</seg>
<seg>less, lessecho, lesskey</seg>
</seglistitem>
</segmentedlist>
 
/trunk/clfs/final-system/common/iproute2.xml
34,48 → 34,17
 
<screen os="s2"><userinput>sed -i '/^TARGETS/s@arpd@@g' misc/Makefile
sed -i '/ARPD/d' Makefile
rm -v man/man8/arpd.8</userinput></screen>
sed -i 's/arpd.8//' man/man8/Makefile</userinput></screen>
 
<para os="f1">Supprimez les en-têtes libnl inutilisés&nbsp;:</para>
<screen os="f2"><userinput>sed -i '/netlink\//d' ip/ipl2tp.c</userinput></screen>
 
<para os="a">Compilez le paquet&nbsp;:</para>
 
<screen os="b"><userinput>make DESTDIR= DOCDIR=/usr/share/doc/iproute2 \
MANDIR=/usr/share/man</userinput></screen>
 
<variablelist os="c">
<title>Voici la signification de l'option de make&nbsp;:</title>
<para os="c">Ce paquet ne fournit pas de suite de tests.</para>
 
<varlistentry>
<term><parameter>DESTDIR=</parameter></term>
<listitem>
<para>Cette option remplace le DESTDIR de /usr par défaut afin que les
binaires IPRoute2 soient installés dans
<filename class="directory">/sbin</filename>. C'est le bon emplacement
suivant la FHS parce que certains des binaires IPRoute2 sont utilisés
dans le paquet LFS-Bootscripts.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><parameter>DOCDIR=/usr/share/doc/iproute2 MANDIR=/usr/share/man</parameter></term>
<listitem>
<para>Il peut résulter du paramètre DESTDIR=/ que la documentation
soit installée dans <filename class="directory">/share/doc</filename>
et dans <filename class="directory">/share/man</filename>. Ces options assurent
que les docs sont installées aux bons endroits.</para>
</listitem>
</varlistentry>
</variablelist>
<para os="d">Installez le paquet&nbsp;:</para>
 
<para os="d">Ce paquet ne fournit pas de suite de tests.</para>
<screen os="e"><userinput>make DOCDIR=/usr/share/doc/iproute2-&iproute2-version; install</userinput></screen>
 
<para os="e">Installez le paquet&nbsp;:</para>
 
<screen os="f"><userinput>make DESTDIR= DOCDIR=/usr/share/doc/iproute2 \
MANDIR=/usr/share/man install</userinput></screen>
 
</sect2>
 
<sect2 id="contents-iproute2" role="content">
88,8 → 57,9
<seglistitem>
<seg>bridge, ctstat (lien vers lnstat), genl, ifcfg, ifstat, ip, lnstat,
nstat, routef, routel, rtacct, rtmon, rtpr, rtstat (lien vers lnstat), ss,
et tc</seg>
<seg>/etc/iproute2, /lib/tc, /usr/lib/tc, /usr/share/doc/iproute2</seg>
tc</seg>
<seg>/etc/iproute2, /usr/lib/tc,
/usr/share/doc/iproute2-&iproute2-version;</seg>
</seglistitem>
</segmentedlist>
 
/trunk/clfs/final-system/common/coreutils.xml
37,8 → 37,8
<screen os="d"><userinput>FORCE_UNSAFE_CONFIGURE=1 \
./configure --prefix=/usr \
--enable-no-install-program=kill,uptime \
--enable-install-program=hostname</userinput></screen>
--enable-install-program=hostname --libexecdir=/usr/lib</userinput></screen>
 
<variablelist os="d1">
<title>Voici la signification des options de configure&nbsp;:</title>
56,43 → 56,40
 
<screen os="f"><userinput>make</userinput></screen>
 
<para os="g">La suite de tests de Coreutils fait plusieurs suppositions sur la présence d'utilisateurs et de groupes
système qui ne sont pas valides à l'intérieur de l'environnement minimal existant pour le moment. Donc
nous allons réutiliser les groupes et l'utilisateur dummy créés avec
Util-linux. Passez à <quote>Installez le paquet</quote> si vous n'avez pas
lancé la suite de tests et si vous n'avez pas créé les groupes et les
utilisateurs dummy à Util-linux.</para>
 
<para os="h">La suite de tests est maintenant prête à être exécutée. Tout
<para os="g">La suite de tests est maintenant prête à être exécutée. Tout
d'abord, lancez les quelques tests qui ont besoin d'être lancés en tant que
<systemitem class="username">root</systemitem>&nbsp;:</para>
 
<screen os="i"><userinput remap="test">make NON_ROOT_USERNAME=dummy</userinput></screen>
<screen os="h"><userinput remap="test">make NON_ROOT_USERNAME=nobody check-root</userinput></screen>
 
<para os="j">Nous allons maintenant lancer la suite de tests en tant
qu'utilisateur <systemitem class="username">dummy</systemitem>. Corrigez les
droits de quelques fichiers pour autoriser cela&nbsp;:</para>
<screen os="k"><userinput remap="test">chown -Rv dummy .</userinput></screen>
<para os="i">La suite de tests va maintenant se lancer en tant
qu'utilisateur <systemitem class="username">dummy</systemitem>. Certains tests
exigent que l'utilisateur soit membre de plusieurs groupes Ajoutez un groupe
temporaire et intrégrez-y <systemitem class="username">nobody</systemitem>
pour que les tests ne soient pas passés&nbsp;:</para>
 
<para os="l">Puis, exécutez le reste des tests en tant qu'utilisateur
<screen os="j"><userinput remap="test">echo "dummy:x:1000:nobody" &gt;&gt; /etc/group</userinput></screen>
 
<para os="k">Corrigez les droits de certains fichiers pour que l'utilisateur
non-root puisse compiler et lancer les tests&nbsp;:</para>
 
<screen os="l"><userinput remap="test">chown -Rv nobody .</userinput></screen>
 
<para os="m">Puis, exécutez le reste des tests en tant qu'utilisateur
<systemitem class="username">nobody</systemitem>&nbsp;:</para>
 
<screen os="m"><userinput remap="test">su dummy -s /bin/bash \
<screen os="n"><userinput remap="test">su dummy -s /bin/bash \
-c "PATH=$PATH make RUN_EXPENSIVE_TESTS=yes -k check || true"</userinput></screen>
 
<para os="n">Lorsque les tests sont complétés, supprimez l'utilisateur et les groupes
<systemitem class="username">dummy</systemitem>&nbsp;:</para>
<para os="o">Supprimez le groupe temporaire&nbsp;:</para>
 
<screen os="o"><userinput remap="test">sed -i '/dummy/d' /etc/passwd /etc/group</userinput></screen>
<screen os="p"><userinput remap="test">sed -i '/dummy/d' /etc/group</userinput></screen>
 
<para os="p">Installez le paquet&nbsp;:</para>
<para os="q">Installez le paquet&nbsp;:</para>
 
<screen os="q"><userinput>make install</userinput></screen>
<screen os="r"><userinput>make install</userinput></screen>
 
<para os="r">Installez le paquet :</para>
 
<para os="s">Déplacez quelques programmes aux emplacements spécifiés par le
<para os="s">Déplacez des programmes aux emplacements spécifiés par le
FHS&nbsp;:</para>
 
<screen os="t"><userinput>mv -v /usr/bin/{cat,chgrp,chmod,chown,cp,date} /bin
100,14 → 97,6
mv -v /usr/bin/{mv,pwd,rm,rmdir,stty,true,uname} /bin
mv -v /usr/bin/chroot /usr/sbin</userinput></screen>
 
<para os="u">D'autres programmes de Coreutils sont utilisés par certains des scripts du paquet CLFS-Bootscripts. Comme il
se peut que <filename class="directory">/usr</filename> ne soit pas disponible pendant les premières étapes du démarrage,
ces binaires doivent être sur la partition racine&nbsp;:</para>
 
<screen os="v"><userinput>mv -v /usr/bin/{[,basename,head,install,nice} /bin
mv -v /usr/bin/{readlink,sleep,sync,test,touch} /bin
ln -svf ../../bin/install /usr/bin</userinput></screen>
 
</sect2>
 
<sect2 id="contents-coreutils" role="content">
127,7 → 116,7
rmdir, runcon, seq, sha1sum, sha224sum, sha256sum, sha384sum,
sha512sum, shred, shuf, sleep, sort, split, stat, stdbuf, stty, sum,
sync, tac, tail, tee, test, timeout, touch, tr, true, truncate, tsort,
tty, uname, unexpand, uniq, unlink, users, vdir, wc, who, whoami, and yes</seg>
tty, uname, unexpand, uniq, unlink, users, vdir, wc, who, whoami, yes</seg>
<seg>libstdbuf.so</seg>
</seglistitem>
</segmentedlist>
/trunk/clfs/final-system/common/bzip2.xml
33,6 → 33,12
 
<screen os="s2"><userinput>sed -i -e 's:ln -s -f $(PREFIX)/bin/:ln -s :' Makefile</userinput></screen>
 
<para os="s3">Faites installer à Bzip2 ses pages de man cans
<filename class="directory">/usr/share/man</filename> et non dans
<filename class="directory">/usr/man</filename>&nbsp;:</para>
 
<screen os="s4"><userinput>sed -i 's@X)/man@X)/share/man@g' ./Makefile</userinput></screen>
 
<para os="a">Le paquet Bzip2 ne contient pas de script <command>configure</command>. Compilez-le avec&nbsp;:</para>
 
<screen os="b"><userinput>make -f Makefile-libbz2_so
72,10 → 78,9
<seglistitem>
<seg>bunzip2 (lien vers bzip2), bzcat (lien vers bzip2), bzcmp (lien vers
bzdiff), bzdiff, bzegrep (lien vers bzgrep), bzfgrep (lien vers bzgrep),
bzgrep, bzip2, bzip2recover, bzless (lien vers bzmore) et bzmore</seg>
 
<seg>libbz2.a, libbz2.so (link to libbz2.so.1.0), libbz2.so.1.0 (link to
libbz2.so.&bzip2-version;) et libbz2.so.&bzip2-version;</seg>
bzgrep, bzip2, bzip2recover, bzless (lien vers bzmore), bzmore</seg>
<seg>libbz2.a, libbz2.so (link to libbz2.so.1.0), libbz2.so.1.0 (lien vers
libbz2.so.&bzip2-version;), libbz2.so.&bzip2-version;</seg>
</seglistitem>
</segmentedlist>
 
/trunk/clfs/final-system/common/isl.xml
Cannot display: file marked as a binary type.
svn:mime-type = application/xml
/trunk/clfs/final-system/common/adjusting.xml
10,7 → 10,7
 
<title>Adjusting the Toolchain</title>
 
<para os="a">Maintenant, on modifie le fichier de specs de GCC pour qu'il pointe vers le nouvel éditeur de liens dynamique.
<para os="a">Maintenant, on ajuste le fichier de specs de GCC pour qu'il pointe vers le nouvel éditeur de liens dynamique.
Une commande <command>perl</command> s'en charge&nbsp;:</para>
 
<screen os="c"><userinput>gcc -dumpspecs | \
18,12 → 18,14
-e 's@\*startfile_prefix_spec:\n@$_/usr/lib/ @g;' &gt; \
$(dirname $(gcc --print-libgcc-file-name))/specs</userinput></screen>
 
<para os="d">C'est une bonne idée d'examiner visuellement le fichier de specs
pour vérifier que le changement voulu a bien été effectué en fin de compte.</para>
<para os="d">La commande <command>perl</command> ci-dessus apporte 2 modifications
aux specs de GCC&nbsp;: il supprime <quote>/tools</quote> du nom du chemin
menant à l'éditeur de liens dynamiques et il ajoute <quote>/usr/lib/</quote>
au startfile_prefix_spec. C'est une bonne idée d'examiner visuellement le
fichier <filename>specs</filename> et de le comparer avec la sortie de
<command>gcc -dumpspecs</command>, pour vérifier que les changements attendus
ont bien été faits.</para>
 
<para os="e">Remarquez que <filename class="directory">/lib</filename> est à présent le préfixe de notre nouvel éditeur de
liens dynamique.</para>
 
<caution>
 
<para os="f">Il est impératif à ce moment d'arrêter et de vous assurer que les
/trunk/clfs/final-system/common/gawk.xml
41,6 → 41,11
 
<screen os="g"><userinput>make install</userinput></screen>
 
<para os="h">Installez la documentation&nbsp;:</para>
 
<screen os="i"><userinput>mkdir -v /usr/share/doc/gawk-&gawk-version;
cp -v doc/{awkforai.txt,*.{eps,pdf,jpg}} /usr/share/doc/gawk-&gawk-version;</userinput></screen>
 
</sect2>
 
<sect2 id="contents-gawk" role="content">
52,8 → 57,9
 
<seglistitem>
<seg>awk (link to gawk), gawk, gawk-&gawk-version;, grcat, igawk,
pgawk, pgawk-&gawk-version; et pwcat</seg>
<seg>/usr/lib/awk, /usr/share/awk</seg>
pgawk, pgawk-&gawk-version;, pwcat</seg>
<seg>/usr/lib/awk, /usr/lib/gawk, /usr/share/awk,
/usr/share/doc/gawk-&gawk-version;</seg>
</seglistitem>
</segmentedlist>
 
/trunk/clfs/final-system/common/binutils.xml
61,9 → 61,9
 
<para os="j">Compilez le paquet&nbsp;:</para>
 
<screen os="k"><userinput>make configure-host</userinput></screen>
<screen os="k"><userinput>make tooldir=/usr</userinput></screen>
 
<important os="l">
<!-- <important os="l">
<para>Pendant <command>make configure-host</command> il se peut que vous receviez le message d'erreur suivant. Vous
pouvez l'ignorer en toute sécurité.</para>
 
72,6 → 72,7
package in order for those modifications to take effect. You
can get `Flex' from any GNU archive site.</computeroutput></screen>
</important>
-->
 
<screen os="m"><userinput>make tooldir=/usr</userinput></screen>
 
95,8 → 96,9
 
 
<important os="o">
<para>La suite de tests de Binutils dans cette section est
considérée comme critique. Ne la sautez sous aucun prétexte.</para>
<para>Étant donné le rôle critique de Binutils dans le bon fonctionnement
d'un système, les développeurs de CLFS recommandent fortement de lancer la
suite de tests.</para>
</important>
 
<para os="p">Testez les résultats&nbsp;:</para>
107,11 → 109,6
 
<screen os="s"><userinput>make tooldir=/usr install</userinput></screen>
 
<para os="t">Installez le fichier d'en-tête <filename class="headerfile">libiberty</filename> dont ont besoin certains
paquets&nbsp;:</para>
 
<screen os="u"><userinput>cp -v ../binutils-&binutils-dir;/include/libiberty.h /usr/include</userinput></screen>
 
</sect2>
 
<sect2 id="contents-binutils" role="content">
122,10 → 119,9
<segtitle>Bibliothèques installées</segtitle>
<segtitle>Répertoire installé</segtitle>
<seglistitem>
<seg>addr2line, ar, as, c++filt, elfedit, gprof, ld, ld.bfd, nm, objcopy,
objdump,
ranlib, readelf, size, strings et strip</seg>
<seg>libiberty.a, libbfd.[a,so] et libopcodes.[a,so]</seg>
<seg>addr2line, ar, as, c++filt, elfedit, gprof, ld, ld.bfd, nm,
objcopy, objdump, ranlib, readelf, size, strings, strip</seg>
<seg>libbfd.[a,so], libopcodes.[a,so]</seg>
<seg>/usr/lib/ldscripts</seg>
</seglistitem>
</segmentedlist>
313,19 → 309,6
</listitem>
</varlistentry>
 
<varlistentry id="libiberty">
<term><filename class="libraryfile">libiberty</filename></term>
<listitem>
<para>Contient des routines utilisées par différents programmes GNU comme
<command>getopt</command>, <command>obstack</command>,
<command>strerror</command>, <command>strtol</command> et
<command>strtoul</command></para>
<indexterm zone="ch-system-binutils libiberty">
<primary sortas="c-libiberty">libiberty</primary>
</indexterm>
</listitem>
</varlistentry>
 
<varlistentry id="libbfd">
<term><filename class="libraryfile">libbfd</filename></term>
<listitem>
/trunk/clfs/final-system/common/kmod.xml
30,7 → 30,7
 
<screen os="b"><userinput>./configure --prefix=/usr \
--bindir=/bin --sysconfdir=/etc \
--with-rootlibdir=/lib --disable-manpages \
--with-rootlibdir=/lib \
--with-zlib --with-xz</userinput></screen>
 
<variablelist os="c">
64,18 → 64,15
 
<para os="g">Installez le paquet&nbsp;:</para>
 
<screen os="h"><userinput>make install
make -C man install</userinput></screen>
<screen os="h"><userinput>make install</userinput></screen>
 
<para os="i">Créez des liens symboliques pour les programmes qui cherchent
Module-Init-Tools.</para>
Module-Init-Tools&nbsp;:</para>
 
<screen os="j"><userinput>ln -sfv kmod /bin/lsmod
ln -sfv ../bin/kmod /sbin/depmod
ln -sfv ../bin/kmod /sbin/insmod
ln -sfv ../bin/kmod /sbin/modprobe
ln -sfv ../bin/kmod /sbin/modinfo
ln -sfv ../bin/kmod /sbin/rmmod</userinput></screen>
for tool in depmod insmod modinfo modprobe rmmod; do
ln -sfv ../bin/kmod /sbin/${tool}
done</userinput></screen>
 
</sect2>
 
86,8 → 83,9
<segtitle>Programmes installés</segtitle>
 
<seglistitem>
<seg>depmod, insmod, kmod, lsmod, modinfo, modprobe et
rmmod</seg>
<seg>depmod (lien vers kmod), insmod (lien vers kmod), kmod,
lsmod (lien vers kmod), modinfo (link to kmod), modprobe (lien vers kmod),
rmmod (lien vers kmod) </seg>
</seglistitem>
</segmentedlist>
 
/trunk/clfs/final-system/common/grep.xml
50,7 → 50,7
<segtitle>Programmes installés</segtitle>
 
<seglistitem>
<seg>egrep, fgrep et grep</seg>
<seg>egrep, fgrep, grep</seg>
</seglistitem>
</segmentedlist>
 
/trunk/clfs/final-system/common/findutils.xml
62,17 → 62,6
 
<screen os="h"><userinput>make install</userinput></screen>
 
<para os="i">Le programme <command>find</command> est utilisé par certains des scripts du paquet CLFS-Bootscripts. Comme
il se peut que <filename class="directory">/usr</filename> ne soit pas disponible pendant les premières étapes du
démarrage, le binaire <command>find</command> doit être sur la partition racine&nbsp;:</para>
 
<screen os="j"><userinput>mv -v /usr/bin/find /bin</userinput></screen>
 
<para os="k">Le script <command>updatedb</command> doit être modifié pour pointer vers le nouvel emplacement de
<command>find</command>&nbsp;:</para>
 
<screen os="l"><userinput>sed -i 's@find:=${BINDIR}@find:=/bin@' /usr/bin/updatedb</userinput></screen>
 
</sect2>
 
<sect2 id="contents-findutils" role="content">
83,7 → 72,7
<segtitle>Répertoire installé</segtitle>
 
<seglistitem>
<seg>bigram, code, find, frcode, locate, oldfind, updatedb, and xargs</seg>
<seg>bigram, code, find, frcode, locate, oldfind, updatedb, xargs</seg>
<seg>/usr/lib/locate</seg>
</seglistitem>
</segmentedlist>
/trunk/clfs/final-system/common/automake.xml
27,7 → 27,7
 
<para os="a">Préparez la compilation d'Automake&nbsp;:</para>
 
<screen os="b"><userinput>./configure --prefix=/usr</userinput></screen>
<screen os="b"><userinput>./configure --prefix=/usr --docdir=/usr/share/doc/automake-&automake-version;</userinput></screen>
 
<para os="c">Compilez le paquet&nbsp;:</para>
 
51,10 → 51,10
<segtitle>Répertoires installés</segtitle>
 
<seglistitem>
<seg>acinstall, aclocal, aclocal-&automake-version2;, automake,
<seg>aclocal, aclocal-&automake-version2;, automake,
automake-&automake-version2;, compile, config.guess, config.sub,
depcomp, elisp-comp, install-sh, mdate-sh, missing, mkinstalldirs,
py-compile, symlink-tree et ylwrap</seg>
depcomp, install-sh, mdate-sh, missing, mkinstalldirs,
py-compile, symlink-tree, ylwrap</seg>
<seg>/usr/share/aclocal-&automake-version2;,
/usr/share/automake-&automake-version2;, /usr/share/doc/automake</seg>
</seglistitem>
65,16 → 65,6
<?dbfo list-presentation="list"?>
<?dbhtml list-presentation="table"?>
 
<varlistentry id="acinstall">
<term><command>acinstall</command></term>
<listitem>
<para>Un script qui installe des fichiers M4, style aclocal</para>
<indexterm zone="ch-system-automake acinstall">
<primary sortas="b-acinstall">acinstall</primary>
</indexterm>
</listitem>
</varlistentry>
 
<varlistentry id="aclocal">
<term><command>aclocal</command></term>
<listitem>
165,16 → 155,6
</listitem>
</varlistentry>
 
<varlistentry id="elisp-comp">
<term><command>elisp-comp</command></term>
<listitem>
<para>Compile le code Lisp d'Emacs</para>
<indexterm zone="ch-system-automake elisp-comp">
<primary sortas="b-elisp-comp">elisp-comp</primary>
</indexterm>
</listitem>
</varlistentry>
 
<varlistentry id="install-sh">
<term><command>install-sh</command></term>
<listitem>
/trunk/clfs/final-system/common/gzip.xml
57,7 → 57,7
 
<seglistitem>
<seg>gunzip, gzexe, gzip, uncompress, zcat, zcmp, zdiff,
zegrep, zfgrep, zforce, zgrep, zless, zmore et znew</seg>
zegrep, zfgrep, zforce, zgrep, zless, zmore, znew</seg>
</seglistitem>
</segmentedlist>
 
/trunk/clfs/final-system/common/bash.xml
32,10 → 32,11
<para os="a">Préparez la compilation de Bash&nbsp;:</para>
 
<screen os="b"><userinput>./configure --prefix=/usr --bindir=/bin \
--without-bash-malloc --with-installed-readline</userinput></screen>
--without-bash-malloc --with-installed-readline \
--docdir=/usr/share/doc/bash-&bash-version;</userinput></screen>
 
<variablelist os="c">
<title>Voici la signification de l'options de configure&nbsp;:</title>
<title>Voici la signification de la nouvelle option de configure&nbsp;:</title>
 
<varlistentry>
<term><parameter>--with-installed-readline</parameter></term>
57,7 → 58,7
 
<para os="g">Installez le paquet&nbsp;:</para>
 
<screen os="h"><userinput>make htmldir=/usr/share/doc/bash-&bash-version; install</userinput></screen>
<screen os="h"><userinput>make install</userinput></screen>
 
<para os="i">Lancez le programme <command>bash</command> nouvellement
compilé (en remplaçant celui en cours d'exécution)&nbsp;:</para>
80,7 → 81,7
<segtitle>Programmes installés</segtitle>
<segtitle>Répertoire installé</segtitle>
<seglistitem>
<seg>bash, bashbug et sh (link to bash)</seg>
<seg>bash, bashbug, sh (link to bash)</seg>
<seg>/usr/share/doc/bash-&bash-version;</seg>
</seglistitem>
</segmentedlist>
/trunk/clfs/final-system/common/mpc.xml
30,25 → 30,28
 
<screen os="b"><userinput>CC="gcc -isystem /usr/include" \
LDFLAGS="-Wl,-rpath-link,/usr/lib:/lib" \
./configure --prefix=/usr</userinput></screen>
./configure --prefix=/usr --docdir=/usr/share/doc/mpc-&mpc-version;</userinput></screen>
 
<para os="c">Compilez le paquet&nbsp;:</para>
 
<screen os="d"><userinput>make</userinput></screen>
 
<important os="e">
<para>La suite de tests de MPC est considérée comme critique. Ne la
sautez en aucune circonstance.</para>
</important>
<para os="e">Construisez la documentation HTML&nbsp;:</para>
 
<para os="f">Testz les résultats&nbsp;:</para>
<screen os="f"><userinput>make html</userinput></screen>
 
<screen os="g"><userinput remap="test">make check</userinput></screen>
<para os="g">Testz les résultats&nbsp;:</para>
 
<para os="h">Installez le paquet&nbsp;:</para>
<screen os="h"><userinput remap="test">make check</userinput></screen>
 
<screen os="i"><userinput>make install</userinput></screen>
<para os="i">Installez le paquet&nbsp;:</para>
 
<screen os="j"><userinput>make install</userinput></screen>
 
<para os="k">Installez la documentation HTML&nbsp;:</para>
 
<screen os="l"><userinput>make install-html</userinput></screen>
 
</sect2>
 
<sect2 id="contents-mpc" role="content">
56,9 → 59,11
 
<segmentedlist>
<segtitle>Bibliothèques installées</segtitle>
<segtitle>Répertoire installé</segtitle>
 
<seglistitem>
<seg>libmpc.[a,so]</seg>
<seg>/usr/share/doc/mpc-&mpc-version;</seg>
</seglistitem>
</segmentedlist>
 
/trunk/clfs/final-system/common/iana-etc.xml
25,8 → 25,8
<sect2 role="installation">
<title>Installation de Iana-Etc</title>
 
<para os="p2">Le correctif suivant met à jour les fichiers xml services et
de protocole&nbsp;:</para>
<para os="p2">Le correctif suivant contient les fichiers xml des mises à
jour des fichiers services et protocol&nbsp;:</para>
 
<screen os="p3"><userinput>xzcat ../&iana-etc-numbers_update-patch; | patch -Np1 -i -</userinput></screen>
 
53,7 → 53,7
<segtitle>Fichier installés</segtitle>
 
<seglistitem>
<seg>/etc/protocols and /etc/services</seg>
<seg>/etc/protocols, /etc/services</seg>
</seglistitem>
</segmentedlist>
 
/trunk/clfs/final-system/common/ncurses.xml
34,14 → 34,34
 
<screen os="b"><userinput>./configure --prefix=/usr --libdir=/lib \
--with-shared --without-debug --enable-widec \
--with-manpage-format=normal \
--with-manpage-format=normal --enable-pc-files \
--with-default-terminfo-dir=/usr/share/terminfo</userinput></screen>
 
<variablelist os="b1">
<title>Voici la signification de la nouvelle option de configuration&nbsp;:</title>
 
<varlistentry>
<term><parameter>--with-manpage-format=normal</parameter></term>
<listitem>
<para>Ceci dit à Ncurses de ne pas compresser ses pages de man comme
installées.</para>
</listitem>
</varlistentry>
 
<varlistentry>
<term><parameter>--enable-pc-files</parameter></term>
<listitem>
<para>Ceci dit à Ncurses de générer et d'installer des fichiers .pc
pour <command>pkg-config</command>.</para>
</listitem>
</varlistentry>
</variablelist>
 
<para os="c">Compilez le paquet&nbsp;:</para>
 
<screen os="d"><userinput>make</userinput></screen>
 
<para os="e">Ce paquet a une suite de tests qu'on peut lancer après avoir
<para os="e">Ce paquet a une suite de tests, mais on ne peut le lancer qu'après avoir
installé le paquet. Les tests se trouvent dans le répertoire
<filename class="directory">test/</filename>. Voir le fichier
<filename>README</filename> de ce répertoire pour les détails.</para>
56,16 → 76,19
 
<para os="j">Créez des liens symboliques dans <filename class="directory">/usr/lib:</filename></para>
 
<screen os="k"><userinput>rm -v /lib/lib{ncursesw,menuw,panelw,formw}.so
ln -svf ../../lib/libncursesw.so.5 /usr/lib/libncursesw.so
ln -svf ../../lib/libmenuw.so.5 /usr/lib/libmenuw.so
ln -svf ../../lib/libpanelw.so.5 /usr/lib/libpanelw.so
ln -svf ../../lib/libformw.so.5 /usr/lib/libformw.so</userinput></screen>
<screen os="k"><userinput>ln -svf ../../lib/$(readlink /lib/libncursesw.so) /usr/lib/libncursesw.so
ln -svf ../../lib/$(readlink /lib/libmenuw.so) /usr/lib/libmenuw.so
ln -svf ../../lib/$(readlink /lib/libpanelw.so) /usr/lib/libpanelw.so
ln -svf ../../lib/$(readlink /lib/libformw.so) /usr/lib/libformw.so
rm -v /lib/lib{ncursesw,menuw,panelw,formw}.so</userinput></screen>
 
<para os="l">Maintenant, nous allons rendre notre Ncurses compatible pour que les vieux programmes non compatibles avec widec se construisent correctement&nbsp;:</para>
<para os="l">De nombreux paquets utilisant Ncurses se compileront très bien
avec les bibliothèques widechar (étendues), mais ils ne sauront pas les chercher.
Créez des scripts de l'éditeur de liens et des liens symboliques pour permettre
à d'anciens programmes non compatibles widec de se construire correctement&nbsp;:</para>
 
<screen os="m"><userinput>for lib in curses ncurses form panel menu ; do
echo "INPUT(-l${lib}w)" > /usr/lib/lib${lib}.so
echo "INPUT(-l${lib}w)" &gt; /usr/lib/lib${lib}.so
ln -sfv lib${lib}w.a /usr/lib/lib${lib}.a
done
ln -sfv libncursesw.so /usr/lib/libcursesw.so
73,11 → 96,6
ln -sfv libncurses++w.a /usr/lib/libncurses++.a
ln -sfv ncursesw5-config /usr/bin/ncurses5-config</userinput></screen>
 
<para os="n">Maintenant, nous allons créer un lien symbolique pour /usr/share/terminfo dans
<filename class="directory">/usr/lib</filename> pour des questions de compatibilité&nbsp;:</para>
<screen os="o"><userinput>ln -sfv ../share/terminfo /usr/lib/terminfo</userinput></screen>
 
</sect2>
 
<sect2 id="contents-ncurses" role="content">
90,8 → 108,8
 
<seglistitem>
<seg>captoinfo (lien vers tic), clear, infocmp, infotocap (lien vers tic),
ncursesw5-config, reset (lien vers tset), tabs, tic, toe, tput et tset</seg>
<seg>libcursesw.so (link to libncursesw.so), libformw.[a,so] et
ncursesw5-config, reset (lien vers tset), tabs, tic, toe, tput, tset</seg>
<seg>libcursesw.so (link to libncursesw.so), libformw.[a,so],
libpanelw.[a,so]</seg>
<seg>/usr/share/tabset, /usr/share/terminfo</seg>
</seglistitem>
242,7 → 260,7
<listitem>
<para>Contient des fonctions pour implémenter des formulaires</para>
<indexterm zone="ch-system-ncurses libformw">
<primary sortas="c-libform">libformw</primary>
<primary sortas="c-libformw">libformw</primary>
</indexterm>
</listitem>
</varlistentry>
/trunk/clfs/final-system/common/bc.xml
Cannot display: file marked as a binary type.
svn:mime-type = application/xml
/trunk/clfs/final-system/common/iputils.xml
30,7 → 30,7
 
<para os="a">Compilez le paquet&nbsp;:</para>
 
<screen os="b"><userinput>make USE_CAP=no \
<screen os="b"><userinput>make \
IPV4_TARGETS="tracepath ping clockdiff rdisc" \
IPV6_TARGETS="tracepath6 traceroute6"</userinput></screen>
 
54,7 → 54,7
<segtitle>Programmes installés</segtitle>
 
<seglistitem>
<seg>clockdiff, ping, rdisc, tracepath, tracepath6, and traceroute6</seg>
<seg>clockdiff, ping, rdisc, tracepath, tracepath6, traceroute6</seg>
</seglistitem>
</segmentedlist>
 
/trunk/clfs/final-system/common/flex.xml
27,7 → 27,7
 
<para os="a">Préparez la compilation de Flex&nbsp;:</para>
 
<screen os="b"><userinput>./configure --prefix=/usr</userinput></screen>
<screen os="b"><userinput>./configure --prefix=/usr --docdir=/usr/share/doc/flex-&flex-version;</userinput></screen>
 
<para os="c">Compilez le paquet&nbsp;:</para>
 
37,18 → 37,16
 
<screen os="e2"><userinput remap="test">make check</userinput></screen>
 
<para os="e3">La suite de tests signalera 3 échecs, pour des tests qui
utilisent <command>bison</command>, lequel n'est pas encore installé. Pour
faire tous les tests, vous pouvez relancer la suite de tests de Flex après
avoir installé Bison.</para>
 
<para os="f">Installez le paquet&nbsp;:</para>
 
<screen os="g"><userinput>make install</userinput></screen>
 
<para os="h">Quelques paquets s'attendent à trouver la bibliothèque
<filename class="libraryfile">lex</filename> dans <filename
class="directory">/usr/lib</filename>. Créez un lien symbolique pour
en tenir compte&nbsp;:</para>
 
<screen os="i"><userinput>ln -sv libfl.a /usr/lib/libl.a</userinput></screen>
 
<para os="j">Quelques programmes ne connaissent pas encore
<para os="h">Quelques programmes ne connaissent pas encore
<command>flex</command> et essaient de lancer son prédécesseur,
<command>lex</command>. Pour ces programmes, créez un script enveloppe
nommé <filename>lex</filename> appelant <filename>flex</filename> en
55,7 → 53,7
mode d'émulation <command>lex</command>&nbsp;:</para>
 
 
<screen os="k"><userinput>cat &gt; /usr/bin/lex &lt;&lt; "EOF"
<screen os="i"><userinput>cat &gt; /usr/bin/lex &lt;&lt; "EOF"
<literal>#!/bin/sh
# Début de /usr/bin/lex
 
73,10 → 71,12
<segmentedlist>
<segtitle>Programmes installés</segtitle>
<segtitle>Bibliothèques installées</segtitle>
<segtitle>Répertoire installé</segtitle>
 
<seglistitem>
<seg>flex and lex</seg>
<seg>libfl.a et libfl_pic.a</seg>
<seg>flex, flex++ (lien vers flex), lex</seg>
<seg>libfl.[a,so], libfl_pic.[a,so]</seg>
<seg>/usr/share/doc/flex-&flex-version;</seg>
</seglistitem>
</segmentedlist>
 
120,21 → 120,21
</listitem>
</varlistentry>
 
<varlistentry id="libfl.a">
<term><filename class="libraryfile">libfl.a</filename></term>
<varlistentry id="libfl">
<term><filename class="libraryfile">libfl</filename></term>
<listitem>
<para>La bibliothèque <filename class="libraryfile">flex</filename></para>
<indexterm zone="ch-system-flex libfl.a">
<primary sortas="c-libfl.a">libfl.a</primary>
<indexterm zone="ch-system-flex libfl">
<primary sortas="c-libfl">libfl</primary>
</indexterm>
</listitem>
</varlistentry>
<varlistentry id="libfl_pic.a">
<term><filename class="libraryfile">libfl_pic.a</filename></term>
<varlistentry id="libfl_pic">
<term><filename class="libraryfile">libfl_pic</filename></term>
<listitem>
<para>La bibliothèque <filename class="libraryfile">flex</filename></para>
<indexterm zone="ch-system-flex libfl_pic.a">
<primary sortas="c-libfl.a">libfl_pic.a</primary>
<indexterm zone="ch-system-flex libfl_pic">
<primary sortas="c-libfl">libfl_pic</primary>
</indexterm>
</listitem>
</varlistentry>
/trunk/clfs/final-system/common/bison.xml
24,14 → 24,10
<sect2 role="installation">
<title>Installation de Bison</title>
 
<para os="t3">Le script <command>configure </command> ne détermine pas la
bonne valeur pour la suite. Définissez-la donc à la main&nbsp;:</para>
<para os="a">Préparez la compilation de Bison&nbsp;:</para>
 
<screen os="t4"><userinput>echo "ac_cv_prog_lex_is_flex=yes" &gt; config.cache</userinput></screen>
<screen os="b"><userinput>./configure --prefix=/usr</userinput></screen>
 
<para os="a">Préparez la compilation de Bison&nbsp;:</para>
 
<screen os="b"><userinput>./configure --prefix=/usr --cache-file=config.cache</userinput></screen>
<para os="c">Compilez le paquet&nbsp;:</para>
 
<screen os="d"><userinput>make</userinput></screen>
55,7 → 51,7
<segtitle>Répertoire installé</segtitle>
 
<seglistitem>
<seg>bison and yacc</seg>
<seg>bison, yacc</seg>
<seg>liby.a</seg>
<seg>/usr/share/bison</seg>
</seglistitem>
/trunk/clfs/final-system/common/e2fsprogs.xml
66,6 → 66,17
</listitem>
</varlistentry>
 
<varlistentry os="e3">
<term><parameter>--disable-*</parameter></term>
<listitem>
<para>Ceci empêche E2fsprogs de construire et d'installer les bibliothèques
<systemitem class="library">libuuid</systemitem> et
<systemitem class="library">libblkid</systemitem>, le démon
<systemitem class="daemon">uuidd</systemitem> et l'enveloppe
<command>fsck</command>, car Util-Linux les a installés plus tôt.</para>
</listitem>
</varlistentry>
 
</variablelist>
 
<para os="f">Compilez le paquet&nbsp;:</para>
99,9 → 110,9
e2fsck, e2image, e2initrd_helper, e2label, e2undo, e4defrag, filefrag,
fsck.ext2, fsck.ext3, fsck.ext4, fsck.ext4dev, logsave, lsattr,
mk_cmds, mke2fs, mkfs.ext2, mkfs.ext3, mkfs.ext4, mkfs.ext4dev,
mklost+found, resize2fs, et tune2fs</seg>
mklost+found, resize2fs, tune2fs</seg>
<seg>libcom_err.[a,so], libe2p.[a,so], libext2fs.[a,so],
libss.[a,so] et libquota.a</seg>
libss.[a,so], libquota.a</seg>
<seg>/usr/include/e2p, /usr/include/et, /usr/include/ext2fs,
/usr/include/quota, /usr/include/ss, /usr/share/et, /usr/share/ss</seg>
</seglistitem>
184,7 → 195,7
<listitem>
<para>Est utilisé pour vérifier, et quelque fois réparer, les systèmes de
fichiers <systemitem class="filesystem">ext2</systemitem>,
<systemitem class="filesystem">ext3</systemitem> et <systemitem
<systemitem class="filesystem">ext3</systemitem> et <systemitem
class="filesystem">ext4</systemitem></para>
<indexterm zone="ch-system-e2fsprogs e2fsck">
<primary sortas="b-e2fsck">e2fsck</primary>
/trunk/clfs/final-system/common/autoconf.xml
57,7 → 57,7
 
<seglistitem>
<seg>autoconf, autoheader, autom4te, autoreconf, autoscan, autoupdate,
et ifnames</seg>
ifnames</seg>
<seg>/usr/share/autoconf</seg>
</seglistitem>
</segmentedlist>
/trunk/clfs/final-system/64/binutils.xml
76,16 → 76,14
href="../common/binutils.xml"
xpointer="xpointer(//*[@os='k'])"/>
 
<!--
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="../common/binutils.xml"
xpointer="xpointer(//*[@os='l'])"/>
-->
 
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="../common/binutils.xml"
xpointer="xpointer(//*[@os='m'])"/>
 
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="../common/binutils.xml"
xpointer="xpointer(//*[@os='n'])"/>
 
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
112,14 → 110,6
href="../common/binutils.xml"
xpointer="xpointer(//*[@os='s'])"/>
 
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="../common/binutils.xml"
xpointer="xpointer(//*[@os='t'])"/>
 
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="../common/binutils.xml"
xpointer="xpointer(//*[@os='u'])"/>
 
</sect2>
 
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
/trunk/clfs/final-system/64/gcc.xml
43,14 → 43,6
 
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="../common/gcc.xml"
xpointer="xpointer(//*[@os='d'])"/>
 
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="../common/gcc.xml"
xpointer="xpointer(//*[@os='e'])"/>
 
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="../common/gcc.xml"
xpointer="xpointer(//*[@os='f'])"/>
 
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
65,6 → 57,10
href="../common/gcc.xml"
xpointer="xpointer(//*[@os='i'])"/>
 
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="../common/gcc.xml"
xpointer="xpointer(//*[@os='i1'])"/>
 
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="../common/gcc.xml"
xpointer="xpointer(//*[@os='j'])"/>
141,6 → 137,14
href="../common/gcc.xml"
xpointer="xpointer(//*[@os='z'])"/>
 
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="../common/gcc.xml"
xpointer="xpointer(//*[@os='aa'])"/>
 
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="../common/gcc.xml"
xpointer="xpointer(//*[@os='ab'])"/>
 
</sect2>
 
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
/trunk/clfs/chroot/x86-chapter.xml
12,7 → 12,6
<title>If You Are Going to Chroot</title>
 
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="common/introduction.xml"/>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="common/util-linux.xml"/>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="common/kernfs.xml"/>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="x86/before-chroot.xml"/>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="common/chroot.xml"/>
20,6 → 19,5
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="common/creatingdirs.xml"/>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="common/createfiles.xml"/>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="common/pwdgroup.xml"/>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="common/devices.xml"/>
 
</chapter>
/trunk/clfs/maj
1,2004 → 1,3
diff -ru /home/jp/a/BOOK/final-system/64/binutils.xml BOOK/final-system/64/binutils.xml
--- /home/jp/a/BOOK/final-system/64/binutils.xml 2014-05-11 16:24:52.650516678 +0200
+++ BOOK/final-system/64/binutils.xml 2014-10-03 20:44:43.912339261 +0200
@@ -76,13 +76,9 @@
href="../common/binutils.xml"
xpointer="xpointer(//*[@os='k'])"/>
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
+<!-- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="../common/binutils.xml"
- xpointer="xpointer(//*[@os='l'])"/>
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
- href="../common/binutils.xml"
- xpointer="xpointer(//*[@os='m'])"/>
+ xpointer="xpointer(//*[@os='l'])"/> -->
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="../common/binutils.xml"
@@ -115,14 +111,6 @@
href="../common/binutils.xml"
xpointer="xpointer(//*[@os='s'])"/>
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
- href="../common/binutils.xml"
- xpointer="xpointer(//*[@os='t'])"/>
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
- href="../common/binutils.xml"
- xpointer="xpointer(//*[@os='u'])"/>
-
</sect2>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
diff -ru /home/jp/a/BOOK/final-system/64/gcc.xml BOOK/final-system/64/gcc.xml
--- /home/jp/a/BOOK/final-system/64/gcc.xml 2014-05-11 16:24:52.650516678 +0200
+++ BOOK/final-system/64/gcc.xml 2014-10-03 20:44:43.912339261 +0200
@@ -45,14 +45,6 @@
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="../common/gcc.xml"
- xpointer="xpointer(//*[@os='d'])"/>
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
- href="../common/gcc.xml"
- xpointer="xpointer(//*[@os='e'])"/>
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
- href="../common/gcc.xml"
xpointer="xpointer(//*[@os='f'])"/>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
@@ -67,6 +59,10 @@
href="../common/gcc.xml"
xpointer="xpointer(//*[@os='i'])"/>
+ <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
+ href="../common/gcc.xml"
+ xpointer="xpointer(//*[@os='i1'])"/>
+
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="../common/gcc.xml"
xpointer="xpointer(//*[@os='j'])"/>
@@ -143,6 +139,14 @@
href="../common/gcc.xml"
xpointer="xpointer(//*[@os='z'])"/>
+ <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
+ href="../common/gcc.xml"
+ xpointer="xpointer(//*[@os='aa'])"/>
+
+ <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
+ href="../common/gcc.xml"
+ xpointer="xpointer(//*[@os='ab'])"/>
+
</sect2>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
diff -ru /home/jp/a/BOOK/final-system/common/adjusting.xml BOOK/final-system/common/adjusting.xml
--- /home/jp/a/BOOK/final-system/common/adjusting.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/adjusting.xml 2014-10-03 20:44:43.912339261 +0200
@@ -10,7 +10,7 @@
<title>Adjusting the Toolchain</title>
- <para os="a">Now we amend the GCC specs file so that it points to the new
+ <para os="a">Now we adjust GCC's specs so that they point to the new
dynamic linker. A <command>perl</command> command accomplishes this:</para>
<screen os="c"><userinput>gcc -dumpspecs | \
@@ -18,11 +18,13 @@
-e 's@\*startfile_prefix_spec:\n@$_/usr/lib/ @g;' &gt; \
$(dirname $(gcc --print-libgcc-file-name))/specs</userinput></screen>
- <para os="d">It is a good idea to visually inspect the specs file to verify the
- intended change was actually made.</para>
-
- <para os="e">Note that <filename class="directory">/lib</filename> is now
- the prefix of our dynamic linker.</para>
+ <para os="d">The <command>perl</command> command above makes 2
+ modifications to GCC's specs: it removes <quote>/tools</quote> from the
+ pathname to the dynamic linker, and adds <quote>/usr/lib/</quote> to the
+ startfile_prefix_spec. It is a good idea to visually inspect the
+ <filename>specs</filename> file, and compare with the output of
+ <command>gcc -dumpspecs</command>, to verify that
+ the intended changes were actually made.</para>
<caution>
diff -ru /home/jp/a/BOOK/final-system/common/autoconf.xml BOOK/final-system/common/autoconf.xml
--- /home/jp/a/BOOK/final-system/common/autoconf.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/autoconf.xml 2014-10-03 20:44:43.912339261 +0200
@@ -36,7 +36,7 @@
<para os="e">To test the results, issue:</para>
<screen os="e2"><userinput remap="test">make check VERBOSE=yes</userinput></screen>
-
+
<para os="e3">17 tests are skipped that use Automake and different GCC languages.
For full test coverage, Autoconf can be re-tested after Automake has been
installed.</para>
@@ -56,7 +56,7 @@
<seglistitem>
<seg>autoconf, autoheader, autom4te, autoreconf, autoscan, autoupdate,
- and ifnames</seg>
+ ifnames</seg>
<seg>/usr/share/autoconf</seg>
</seglistitem>
</segmentedlist>
diff -ru /home/jp/a/BOOK/final-system/common/automake.xml BOOK/final-system/common/automake.xml
--- /home/jp/a/BOOK/final-system/common/automake.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/automake.xml 2014-10-03 20:44:43.912339261 +0200
@@ -27,7 +27,7 @@
<para os="a">Prepare Automake for compilation:</para>
-<screen os="b"><userinput>./configure --prefix=/usr</userinput></screen>
+<screen os="b"><userinput>./configure --prefix=/usr --docdir=/usr/share/doc/automake-&automake-version;</userinput></screen>
<para os="c">Compile the package:</para>
@@ -51,10 +51,10 @@
<segtitle>Installed directories</segtitle>
<seglistitem>
- <seg>acinstall, aclocal, aclocal-&automake-version2;, automake,
+ <seg>aclocal, aclocal-&automake-version2;, automake,
automake-&automake-version2;, compile, config.guess, config.sub,
- depcomp, elisp-comp, install-sh, mdate-sh, missing, mkinstalldirs,
- py-compile, symlink-tree, and ylwrap</seg>
+ depcomp, install-sh, mdate-sh, missing, mkinstalldirs,
+ py-compile, symlink-tree, ylwrap</seg>
<seg>/usr/share/aclocal-&automake-version2;,
/usr/share/automake-&automake-version2;, /usr/share/doc/automake</seg>
</seglistitem>
@@ -65,16 +65,6 @@
<?dbfo list-presentation="list"?>
<?dbhtml list-presentation="table"?>
- <varlistentry id="acinstall">
- <term><command>acinstall</command></term>
- <listitem>
- <para>A script that installs aclocal-style M4 files</para>
- <indexterm zone="ch-system-automake acinstall">
- <primary sortas="b-acinstall">acinstall</primary>
- </indexterm>
- </listitem>
- </varlistentry>
-
<varlistentry id="aclocal">
<term><command>aclocal</command></term>
<listitem>
@@ -166,16 +156,6 @@
</indexterm>
</listitem>
</varlistentry>
-
- <varlistentry id="elisp-comp">
- <term><command>elisp-comp</command></term>
- <listitem>
- <para>Byte-compiles Emacs Lisp code</para>
- <indexterm zone="ch-system-automake elisp-comp">
- <primary sortas="b-elisp-comp">elisp-comp</primary>
- </indexterm>
- </listitem>
- </varlistentry>
<varlistentry id="install-sh">
<term><command>install-sh</command></term>
diff -ru /home/jp/a/BOOK/final-system/common/bash.xml BOOK/final-system/common/bash.xml
--- /home/jp/a/BOOK/final-system/common/bash.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/bash.xml 2014-10-03 20:44:43.912339261 +0200
@@ -32,10 +32,11 @@
<para os="a">Prepare Bash for compilation:</para>
<screen os="b"><userinput>./configure --prefix=/usr --bindir=/bin \
- --without-bash-malloc --with-installed-readline</userinput></screen>
+ --without-bash-malloc --with-installed-readline \
+ --docdir=/usr/share/doc/bash-&bash-version;</userinput></screen>
<variablelist os="c">
- <title>The meaning of the configure option:</title>
+ <title>The meaning of the new configure option:</title>
<varlistentry>
<term><parameter>--with-installed-readline</parameter></term>
@@ -58,7 +59,7 @@
<para os="g">Install the package:</para>
-<screen os="h"><userinput>make htmldir=/usr/share/doc/bash-&bash-version; install</userinput></screen>
+<screen os="h"><userinput>make install</userinput></screen>
<para os="i">Run the newly compiled <command>bash</command> program (replacing
the one that is currently being executed):</para>
@@ -81,7 +82,7 @@
<segtitle>Installed directory</segtitle>
<seglistitem>
- <seg>bash, bashbug, and sh (link to bash)</seg>
+ <seg>bash, bashbug, sh (link to bash)</seg>
<seg>/usr/share/doc/bash-&bash-version;</seg>
</seglistitem>
</segmentedlist>
diff -ru /home/jp/a/BOOK/final-system/common/bc.xml BOOK/final-system/common/bc.xml
--- /home/jp/a/BOOK/final-system/common/bc.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/bc.xml 2014-10-03 20:44:43.912339261 +0200
@@ -26,7 +26,8 @@
<para os="a">Prepare Bc for compilation:</para>
-<screen os="b"><userinput>./configure --prefix=/usr --with-readline</userinput></screen>
+<screen os="b"><userinput>./configure --prefix=/usr --with-readline \
+ --mandir=/usr/share/man --infodir=/usr/share/info</userinput></screen>
<para os="c">Compile the package:</para>
@@ -49,7 +50,7 @@
<segtitle>Installed programs</segtitle>
<seglistitem>
- <seg>bc and dc</seg>
+ <seg>bc, dc</seg>
</seglistitem>
</segmentedlist>
diff -ru /home/jp/a/BOOK/final-system/common/binutils.xml BOOK/final-system/common/binutils.xml
--- /home/jp/a/BOOK/final-system/common/binutils.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/binutils.xml 2014-10-03 20:44:43.912339261 +0200
@@ -61,19 +61,17 @@
<para os="j">Compile the package:</para>
-<screen os="k"><userinput>make configure-host</userinput></screen>
+<screen os="k"><userinput>make tooldir=/usr</userinput></screen>
- <important os="l">
- <para>During <command>make configure-host</command> you may receive the
+<!-- <important os="l">
+ <para>During <command>make tooldir=/usr</command> you may receive the
following error message. It is safe to ignore.</para>
<screen><computeroutput>WARNING: `flex' is missing on your system. You should only
need it if you modified a `.l' file. You may need the `Flex'
package in order for those modifications to take effect. You
can get `Flex' from any GNU archive site.</computeroutput></screen>
- </important>
-
-<screen os="m"><userinput>make tooldir=/usr</userinput></screen>
+ </important> -->
<variablelist os="n">
<title>The meaning of the make parameter:</title>
@@ -91,8 +89,8 @@
</variablelist>
<important os="o">
- <para>The test suite for Binutils is considered critical.
- Do not skip it under any circumstance.</para>
+ <para>Due to Binutils' critical role in a properly functioning system,
+ the CLFS developers strongly recommend running the testsuite.</para>
</important>
<para os="p">Test the results:</para>
@@ -103,11 +101,6 @@
<screen os="s"><userinput>make tooldir=/usr install</userinput></screen>
- <para os="t">Install the <filename class="headerfile">libiberty</filename> header
- file that is needed by some packages:</para>
-
-<screen os="u"><userinput>cp -v ../binutils-&binutils-dir;/include/libiberty.h /usr/include</userinput></screen>
-
</sect2>
<sect2 id="contents-binutils" role="content">
@@ -119,10 +112,9 @@
<segtitle>Installed directory</segtitle>
<seglistitem>
- <seg>addr2line, ar, as, c++filt, elfedit, gprof, ld, ld.bfd, nm, objcopy,
- objdump,
- ranlib, readelf, size, strings, and strip</seg>
- <seg>libiberty.a, libbfd.[a,so], and libopcodes.[a,so]</seg>
+ <seg>addr2line, ar, as, c++filt, elfedit, gprof, ld, ld.bfd, nm,
+ objcopy, objdump, ranlib, readelf, size, strings, strip</seg>
+ <seg>libbfd.[a,so], libopcodes.[a,so]</seg>
<seg>/usr/lib/ldscripts</seg>
</seglistitem>
</segmentedlist>
@@ -308,19 +300,6 @@
</indexterm>
</listitem>
</varlistentry>
-
- <varlistentry id="libiberty">
- <term><filename class="libraryfile">libiberty</filename></term>
- <listitem>
- <para>Contains routines used by various GNU programs, including
- <command>getopt</command>, <command>obstack</command>,
- <command>strerror</command>, <command>strtol</command>, and
- <command>strtoul</command></para>
- <indexterm zone="ch-system-binutils libiberty">
- <primary sortas="c-libiberty">libiberty</primary>
- </indexterm>
- </listitem>
- </varlistentry>
<varlistentry id="libbfd">
<term><filename class="libraryfile">libbfd</filename></term>
diff -ru /home/jp/a/BOOK/chroot/x86-chapter.xml BOOK/chroot/x86-chapter.xml
--- /home/jp/a/BOOK/chroot/x86-chapter.xml 2014-05-11 16:24:52.622516679 +0200
+++ BOOK/chroot/x86-chapter.xml 2014-10-03 20:44:43.904339261 +0200
@@ -12,7 +12,6 @@
<title>If You Are Going to Chroot</title>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="common/introduction.xml"/>
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="common/util-linux.xml"/>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="common/kernfs.xml"/>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="x86/before-chroot.xml"/>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="common/chroot.xml"/>
@@ -20,6 +19,5 @@
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="common/creatingdirs.xml"/>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="common/createfiles.xml"/>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="common/pwdgroup.xml"/>
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="common/devices.xml"/>
</chapter>
diff -ru /home/jp/a/BOOK/final-system/common/bison.xml BOOK/final-system/common/bison.xml
--- /home/jp/a/BOOK/final-system/common/bison.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/bison.xml 2014-10-03 20:44:43.912339261 +0200
@@ -24,14 +24,9 @@
<sect2 role="installation">
<title>Installation of Bison</title>
- <para os="t3">The <command>configure </command>script does not determine
- the correct value for the following. Set the value manually:</para>
-
-<screen os="t4"><userinput>echo "ac_cv_prog_lex_is_flex=yes" &gt; config.cache</userinput></screen>
-
<para os="a">Prepare Bison for compilation:</para>
-<screen os="b"><userinput>./configure --prefix=/usr --cache-file=config.cache</userinput></screen>
+<screen os="b"><userinput>./configure --prefix=/usr</userinput></screen>
<para os="c">Compile the package:</para>
@@ -56,7 +51,7 @@
<segtitle>Installed directory</segtitle>
<seglistitem>
- <seg>bison and yacc</seg>
+ <seg>bison, yacc</seg>
<seg>liby.a</seg>
<seg>/usr/share/bison</seg>
</seglistitem>
diff -ru /home/jp/a/BOOK/final-system/common/bzip2.xml BOOK/final-system/common/bzip2.xml
--- /home/jp/a/BOOK/final-system/common/bzip2.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/bzip2.xml 2014-10-03 20:44:43.912339261 +0200
@@ -33,6 +33,12 @@
<screen os="s2"><userinput>sed -i -e 's:ln -s -f $(PREFIX)/bin/:ln -s :' Makefile</userinput></screen>
+ <para os="s3">Make Bzip2 install its manpages in
+ <filename class="directory">/usr/share/man</filename> instead of
+ <filename class="directory">/usr/man</filename>:</para>
+
+<screen os="s4"><userinput>sed -i 's@X)/man@X)/share/man@g' ./Makefile</userinput></screen>
+
<para os="a">The Bzip2 package does not contain a <command>configure</command>
script. Compile it with:</para>
@@ -76,9 +82,9 @@
<seglistitem>
<seg>bunzip2 (link to bzip2), bzcat (link to bzip2), bzcmp (link to
bzdiff), bzdiff, bzegrep (link to bzgrep), bzfgrep (link to bzgrep),
- bzgrep, bzip2, bzip2recover, bzless (link to bzmore), and bzmore</seg>
+ bzgrep, bzip2, bzip2recover, bzless (link to bzmore), bzmore</seg>
<seg>libbz2.a, libbz2.so (link to libbz2.so.1.0), libbz2.so.1.0 (link to
- libbz2.so.&bzip2-version;), and libbz2.so.&bzip2-version;</seg>
+ libbz2.so.&bzip2-version;), libbz2.so.&bzip2-version;</seg>
</seglistitem>
</segmentedlist>
diff -ru /home/jp/a/BOOK/final-system/common/cloog.xml BOOK/final-system/common/cloog.xml
--- /home/jp/a/BOOK/final-system/common/cloog.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/cloog.xml 2014-10-03 20:44:43.912339261 +0200
@@ -31,7 +31,7 @@
<screen os="b"><userinput>CC="gcc -isystem /usr/include" \
LDFLAGS="-Wl,-rpath-link,/usr/lib:/lib" \
- ./configure --prefix=/usr --enable-shared --with-isl=system</userinput></screen>
+ ./configure --prefix=/usr --with-isl=system</userinput></screen>
<para os="s1">Apply a <command>sed</command> which prevents the attempted installation of an invalid file:</para>
@@ -41,18 +41,13 @@
<screen os="d"><userinput>make</userinput></screen>
- <important os="e">
- <para>The test suite for CLooG is considered
- critical. Do not skip it under any circumstance.</para>
- </important>
+ <para os="e">Test the results:</para>
- <para os="f">Test the results:</para>
+<screen os="f"><userinput remap="test">make check</userinput></screen>
-<screen os="g"><userinput remap="test">make check</userinput></screen>
+ <para os="g">Install the package:</para>
- <para os="h">Install the package:</para>
-
-<screen os="i"><userinput>make install</userinput></screen>
+<screen os="h"><userinput>make install</userinput></screen>
</sect2>
diff -ru /home/jp/a/BOOK/final-system/common/coreutils.xml BOOK/final-system/common/coreutils.xml
--- /home/jp/a/BOOK/final-system/common/coreutils.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/coreutils.xml 2014-10-03 20:44:43.912339261 +0200
@@ -37,11 +37,11 @@
<screen os="d"><userinput>FORCE_UNSAFE_CONFIGURE=1 \
./configure --prefix=/usr \
--enable-no-install-program=kill,uptime \
- --enable-install-program=hostname</userinput></screen>
-
+ --enable-install-program=hostname --libexecdir=/usr/lib</userinput></screen>
+
<variablelist os="d1">
<title>The meaning of the configure options:</title>
-
+
<varlistentry os="d2">
<term><parameter>FORCE_UNSAFE_CONFIGURE=1</parameter></term>
<listitem>
@@ -55,56 +55,46 @@
<screen os="f"><userinput>make</userinput></screen>
- <para os="g">The test suite of Coreutils makes several assumptions about the
- presence of system users and groups that are not valid within the minimal
- environment that exists at the moment. Therefore, we will reuse the dummy
- groups and user created during Util-linux. Skip down to <quote>Install the
- package</quote> if not running the test suite and you did not create the
- dummy groups and users during Util-linux.</para>
-
- <para os="h">Now the test suite is ready to be run. First, run
+ <para os="g">Now the test suite is ready to be run. First, run
the tests that are meant to be run as user
<systemitem class="username">root</systemitem>:</para>
-<screen os="i"><userinput remap="test">make NON_ROOT_USERNAME=dummy check-root</userinput></screen>
+<screen os="h"><userinput remap="test">make NON_ROOT_USERNAME=nobody check-root</userinput></screen>
- <para os="j">The testsuite will now be run as the
- <systemitem class="username">dummy</systemitem> user. Fix the permissions
- for a few files to allow this:</para>
+ <para os="i">The test suite will now be run as the
+ <systemitem class="username">nobody</systemitem> user. Some tests require
+ that the user be a member of more than one group. Add a temporary group
+ and make the user <systemitem class="username">nobody</systemitem> a part
+ of it so that the tests are not skipped:</para>
-<screen os="k"><userinput remap="test">chown -Rv dummy .</userinput></screen>
+<screen os="j"><userinput remap="test">echo "dummy:x:1000:nobody" &gt;&gt; /etc/group</userinput></screen>
- <para os="l">Then run the remainder of the tests as the
- <systemitem class="username">dummy</systemitem> user:</para>
+ <para os="k">Fix permissions of some files so the non-root user can compile
+ and run the tests:</para>
-<screen os="m"><userinput remap="test">su dummy -s /bin/bash \
+<screen os="l"><userinput remap="test">chown -Rv nobody .</userinput></screen>
+
+ <para os="m">Then run the remainder of the tests as the
+ <systemitem class="username">nobody</systemitem> user:</para>
+
+<screen os="n"><userinput remap="test">su nobody -s /bin/bash \
-c "PATH=$PATH make RUN_EXPENSIVE_TESTS=yes -k check || true"</userinput></screen>
- <para os="n">When testing is complete, remove the
- <systemitem class="username">dummy</systemitem> user and groups:</para>
+ <para os="o">Remove the temporary group:</para>
-<screen os="o"><userinput remap="test">sed -i '/dummy/d' /etc/passwd /etc/group</userinput></screen>
+<screen os="p"><userinput remap="test">sed -i '/dummy/d' /etc/group</userinput></screen>
- <para os="p">Install the package:</para>
+ <para os="q">Install the package:</para>
-<screen os="q"><userinput>make install</userinput></screen>
+<screen os="r"><userinput>make install</userinput></screen>
- <para os="r">Move programs to the locations specified by the FHS:</para>
+ <para os="s">Move programs to the locations specified by the FHS:</para>
-<screen os="s"><userinput>mv -v /usr/bin/{cat,chgrp,chmod,chown,cp,date} /bin
+<screen os="t"><userinput>mv -v /usr/bin/{cat,chgrp,chmod,chown,cp,date} /bin
mv -v /usr/bin/{dd,df,echo,false,hostname,ln,ls,mkdir,mknod} /bin
mv -v /usr/bin/{mv,pwd,rm,rmdir,stty,true,uname} /bin
mv -v /usr/bin/chroot /usr/sbin</userinput></screen>
- <para os="t">Other Coreutils programs are used by some of the scripts
- in the CLFS-Bootscripts package. As <filename
- class="directory">/usr</filename> may not be available during the early
- stages of booting, those binaries need to be on the root partition:</para>
-
-<screen os="u"><userinput>mv -v /usr/bin/{[,basename,head,install,nice} /bin
-mv -v /usr/bin/{readlink,sleep,sync,test,touch} /bin
-ln -svf ../../bin/install /usr/bin</userinput></screen>
-
</sect2>
<sect2 id="contents-coreutils" role="content">
@@ -125,7 +115,7 @@
rmdir, runcon, seq, sha1sum, sha224sum, sha256sum, sha384sum,
sha512sum, shred, shuf, sleep, sort, split, stat, stdbuf, stty, sum,
sync, tac, tail, tee, test, timeout, touch, tr, true, truncate, tsort,
- tty, uname, unexpand, uniq, unlink, users, vdir, wc, who, whoami, and yes</seg>
+ tty, uname, unexpand, uniq, unlink, users, vdir, wc, who, whoami, yes</seg>
<seg>libstdbuf.so</seg>
<seg>/usr/lib/coreutils</seg>
</seglistitem>
diff -ru /home/jp/a/BOOK/final-system/common/diffutils.xml BOOK/final-system/common/diffutils.xml
--- /home/jp/a/BOOK/final-system/common/diffutils.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/diffutils.xml 2014-10-03 20:44:43.912339261 +0200
@@ -25,14 +25,19 @@
<sect2 role="installation">
<title>Installation of Diffutils</title>
+ <para os="s1">Fix a bug that prevents locale files from being installed:</para>
+
+<screen os="s2"><userinput>sed -i 's:= @mkdir_p@:= /bin/mkdir -p:' po/Makefile.in.in</userinput></screen>
+
<para os="a">Prepare Diffutils for compilation:</para>
<screen os="b"><userinput>./configure --prefix=/usr</userinput></screen>
- <para os="s1">Diffutils wants <command>ed</command> as the default editor.
- The following sed will change the default to <command>vim</command>:</para>
+ <para os="s3">Diffutils wants <command>ed</command> as the default editor
+ for <command>sdiff</command>. The following <command>sed</command> will
+ change the default to <command>vi</command>:</para>
-<screen os="s2"><userinput>sed -i 's@\(^#define DEFAULT_EDITOR_PROGRAM \).*@\1"vi"@' lib/config.h</userinput></screen>
+<screen os="s4"><userinput>sed -i 's@\(^#define DEFAULT_EDITOR_PROGRAM \).*@\1"vi"@' lib/config.h</userinput></screen>
<para os="c">Compile the package:</para>
@@ -55,7 +60,7 @@
<segtitle>Installed programs</segtitle>
<seglistitem>
- <seg>cmp, diff, diff3, and sdiff</seg>
+ <seg>cmp, diff, diff3, sdiff</seg>
</seglistitem>
</segmentedlist>
diff -ru /home/jp/a/BOOK/final-system/common/e2fsprogs.xml BOOK/final-system/common/e2fsprogs.xml
--- /home/jp/a/BOOK/final-system/common/e2fsprogs.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/e2fsprogs.xml 2014-10-03 20:44:43.912339261 +0200
@@ -66,6 +66,18 @@
</listitem>
</varlistentry>
+ <varlistentry os="e3">
+ <term><parameter>--disable-*</parameter></term>
+ <listitem>
+ <para>This prevents E2fsprogs from building and installing the
+ <systemitem class="library">libuuid</systemitem> and
+ <systemitem class="library">libblkid</systemitem> libraries, the
+ <systemitem class="daemon">uuidd</systemitem> daemon, and the
+ <command>fsck</command> wrapper, as Util-Linux installed all of
+ them earlier.</para>
+ </listitem>
+ </varlistentry>
+
</variablelist>
<para os="f">Compile the package:</para>
@@ -99,9 +111,9 @@
e2fsck, e2image, e2initrd_helper, e2label, e2undo, e4defrag, filefrag,
fsck.ext2, fsck.ext3, fsck.ext4, fsck.ext4dev, logsave, lsattr,
mk_cmds, mke2fs, mkfs.ext2, mkfs.ext3, mkfs.ext4, mkfs.ext4dev,
- mklost+found, resize2fs, and tune2fs</seg>
+ mklost+found, resize2fs, tune2fs</seg>
<seg>libcom_err.[a,so], libe2p.[a,so], libext2fs.[a,so],
- libss.[a,so], and libquota.a</seg>
+ libss.[a,so], libquota.a</seg>
<seg>/usr/include/e2p, /usr/include/et, /usr/include/ext2fs,
/usr/include/quota, /usr/include/ss, /usr/share/et, /usr/share/ss</seg>
</seglistitem>
@@ -183,7 +195,7 @@
<listitem>
<para>Is used to check, and optionally repair <systemitem
class="filesystem">ext2</systemitem>, <systemitem
- class="filesystem">ext3</systemitem> and <systemitem
+ class="filesystem">ext3</systemitem> and <systemitem
class="filesystem">ext4</systemitem>file systems</para>
<indexterm zone="ch-system-e2fsprogs e2fsck">
<primary sortas="b-e2fsck">e2fsck</primary>
@@ -336,7 +348,7 @@
<term><command>mke2fs</command></term>
<listitem>
<para>Creates an <systemitem class="filesystem">ext2</systemitem>,
- <systemitem class="filesystem">ext3</systemitem> or <systemitem
+ <systemitem class="filesystem">ext3</systemitem> or <systemitem
class="filesystem">ext4</systemitem> file system on the given device</para>
<indexterm zone="ch-system-e2fsprogs mke2fs">
<primary sortas="b-mke2fs">mke2fs</primary>
diff -ru /home/jp/a/BOOK/final-system/common/findutils.xml BOOK/final-system/common/findutils.xml
--- /home/jp/a/BOOK/final-system/common/findutils.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/findutils.xml 2014-10-03 20:44:43.912339261 +0200
@@ -58,19 +58,6 @@
<screen os="h"><userinput>make install</userinput></screen>
- <para os="i">The <command>find</command> program is used by some of the scripts
- in the CLFS-Bootscripts package. As <filename
- class="directory">/usr</filename> may not be available during the early
- stages of booting, the <command>find</command> binary needs to be on
- the root partition:</para>
-
-<screen os="j"><userinput>mv -v /usr/bin/find /bin</userinput></screen>
-
- <para os="k">The <command>updatedb</command> script needs to be modified
- to point to the new location for <command>find</command>:</para>
-
-<screen os="l"><userinput>sed -i 's@find:=${BINDIR}@find:=/bin@' /usr/bin/updatedb</userinput></screen>
-
</sect2>
<sect2 id="contents-findutils" role="content">
@@ -81,7 +68,7 @@
<segtitle>Installed directory</segtitle>
<seglistitem>
- <seg>bigram, code, find, frcode, locate, oldfind, updatedb, and xargs</seg>
+ <seg>bigram, code, find, frcode, locate, oldfind, updatedb, xargs</seg>
<seg>/usr/lib/locate</seg>
</seglistitem>
</segmentedlist>
diff -ru /home/jp/a/BOOK/final-system/common/flex.xml BOOK/final-system/common/flex.xml
--- /home/jp/a/BOOK/final-system/common/flex.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/flex.xml 2014-10-03 20:44:43.912339261 +0200
@@ -27,7 +27,7 @@
<para os="a">Prepare Flex for compilation:</para>
-<screen os="b"><userinput>./configure --prefix=/usr</userinput></screen>
+<screen os="b"><userinput>./configure --prefix=/usr --docdir=/usr/share/doc/flex-&flex-version;</userinput></screen>
<para os="c">Compile the package:</para>
@@ -37,24 +37,22 @@
<screen os="e2"><userinput remap="test">make check</userinput></screen>
+ <para os="e3">The test suite will report 3 failures for tests that
+ use <command>bison</command>, which is not installed yet. For full
+ test coverage, you can run Flex's test suite again after Bison
+ is installed.</para>
+
<para os="f">Install the package:</para>
<screen os="g"><userinput>make install</userinput></screen>
- <para os="h">There are some packages that expect to find the
- <filename class="libraryfile">lex</filename> library in <filename
- class="directory">/usr/lib</filename>. Create a symlink to account for
- this:</para>
-
-<screen os="i"><userinput>ln -sv libfl.a /usr/lib/libl.a</userinput></screen>
-
- <para os="j">A few programs do not know about <command>flex</command> yet and
+ <para os="h">A few programs do not know about <command>flex</command> yet and
try to run its predecessor, <command>lex</command>. To support those
programs, create a wrapper script named <filename>lex</filename> that
calls <filename>flex</filename> in <command>lex</command> emulation
mode:</para>
-<screen os="k"><userinput>cat &gt; /usr/bin/lex &lt;&lt; "EOF"
+<screen os="i"><userinput>cat &gt; /usr/bin/lex &lt;&lt; "EOF"
<literal>#!/bin/sh
# Begin /usr/bin/lex
@@ -72,10 +70,12 @@
<segmentedlist>
<segtitle>Installed programs</segtitle>
<segtitle>Installed libraries</segtitle>
+ <segtitle>Installed directory</segtitle>
<seglistitem>
- <seg>flex and lex</seg>
- <seg>libfl.a and libfl_pic.a</seg>
+ <seg>flex, flex++ (link to flex), lex</seg>
+ <seg>libfl.[a,so], libfl_pic.[a,so]</seg>
+ <seg>/usr/share/doc/flex-&flex-version;</seg>
</seglistitem>
</segmentedlist>
@@ -118,22 +118,22 @@
</listitem>
</varlistentry>
- <varlistentry id="libfl.a">
- <term><filename class="libraryfile">libfl.a</filename></term>
+ <varlistentry id="libfl">
+ <term><filename class="libraryfile">libfl</filename></term>
<listitem>
<para>The <filename class="libraryfile">flex</filename> library</para>
- <indexterm zone="ch-system-flex libfl.a">
- <primary sortas="c-libfl.a">libfl.a</primary>
+ <indexterm zone="ch-system-flex libfl">
+ <primary sortas="c-libfl">libfl</primary>
</indexterm>
</listitem>
</varlistentry>
- <varlistentry id="libfl_pic.a">
- <term><filename class="libraryfile">libfl_pic.a</filename></term>
+ <varlistentry id="libfl_pic">
+ <term><filename class="libraryfile">libfl_pic</filename></term>
<listitem>
<para>The <filename class="libraryfile">flex</filename> library</para>
- <indexterm zone="ch-system-flex libfl_pic.a">
- <primary sortas="c-libfl.a">libfl_pic.a</primary>
+ <indexterm zone="ch-system-flex libfl_pic">
+ <primary sortas="c-libfl">libfl_pic</primary>
</indexterm>
</listitem>
</varlistentry>
diff -ru /home/jp/a/BOOK/final-system/common/gawk.xml BOOK/final-system/common/gawk.xml
--- /home/jp/a/BOOK/final-system/common/gawk.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/gawk.xml 2014-10-03 20:44:43.912339261 +0200
@@ -41,6 +41,11 @@
<screen os="g"><userinput>make install</userinput></screen>
+ <para os="h">Install the documentation:</para>
+
+<screen os="i"><userinput>mkdir -v /usr/share/doc/gawk-&gawk-version;
+cp -v doc/{awkforai.txt,*.{eps,pdf,jpg}} /usr/share/doc/gawk-&gawk-version;</userinput></screen>
+
</sect2>
<sect2 id="contents-gawk" role="content">
@@ -52,8 +57,9 @@
<seglistitem>
<seg>awk (link to gawk), gawk, gawk-&gawk-version;, grcat, igawk,
- pgawk, pgawk-&gawk-version;, and pwcat</seg>
- <seg>/usr/lib/awk, /usr/share/awk</seg>
+ pgawk, pgawk-&gawk-version;, pwcat</seg>
+ <seg>/usr/lib/awk, /usr/lib/gawk, /usr/share/awk,
+ /usr/share/doc/gawk-&gawk-version;</seg>
</seglistitem>
</segmentedlist>
diff -ru /home/jp/a/BOOK/final-system/common/gcc.xml BOOK/final-system/common/gcc.xml
--- /home/jp/a/BOOK/final-system/common/gcc.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/gcc.xml 2014-10-03 20:44:43.912339261 +0200
@@ -25,23 +25,15 @@
<sect2 role="installation">
<title>Installation of GCC</title>
- <para os="p1">The following patch contains a number of updates to the
+ <para os="p1">The following patch contains a number of updates to the
&gcc-version; branch by the GCC developers:</para>
<screen os="p2"><userinput>patch -Np1 -i ../&gcc-branch_update-patch;</userinput></screen>
- <para os="fix1">Apply a <command>sed</command> subsitution that will
+ <para os="fix1">Apply a <command>sed</command> substitution that will
suppress the execution of the <command>fixincludes</command> script:</para>
-<screen os="fix2"><userinput>cp -v gcc/Makefile.in{,.orig}
-sed 's@\./fixinc\.sh@-c true@' gcc/Makefile.in.orig > gcc/Makefile.in</userinput></screen>
-
- <para os="d">Apply a <command>sed</command> substitution that will suppress the
- installation of <filename class="libraryfile">libiberty.a</filename>. The
- version of <filename class="libraryfile">libiberty.a</filename> provided by
- Binutils will be used instead:</para>
-
-<screen os="e"><userinput>sed -i 's/install_to_$(INSTALL_DEST) //' libiberty/Makefile.in</userinput></screen>
+<screen os="fix2"><userinput>sed -i 's@\./fixinc\.sh@-c true@' gcc/Makefile.in</userinput></screen>
<para os="f">The GCC documentation recommends building GCC outside of the source
directory in a dedicated build directory:</para>
@@ -51,25 +43,36 @@
<para os="h">Prepare GCC for compilation:</para>
-<screen os="i"><userinput>CC="gcc -isystem /usr/include" \
+<screen os="i"><userinput>SED=sed CC="gcc -isystem /usr/include" \
CXX="g++ -isystem /usr/include" \
LDFLAGS="-Wl,-rpath-link,/usr/lib:/lib" \
../gcc-&gcc-version;/configure --prefix=/usr \
- --libexecdir=/usr/lib --enable-shared --enable-threads=posix \
- --enable-__cxa_atexit --enable-c99 --enable-long-long \
- --enable-clocale=gnu --enable-languages=c,c++ \
+ --libexecdir=/usr/lib --enable-threads=posix \
+ --enable-__cxa_atexit --enable-clocale=gnu --enable-languages=c,c++ \
--disable-multilib --disable-libstdcxx-pch \
- --enable-cloog-backend=isl --disable-isl-version-check --with-system-zlib \
- --enable-checking=release --enable-libstdcxx-time \
- --disable-install-libiberty</userinput></screen>
+ --with-system-zlib --enable-checking=release --enable-libstdcxx-time</userinput></screen>
+
+ <variablelist os="i1">
+ <title>The meaning of the new configure option:</title>
+
+ <varlistentry>
+ <term><parameter>SED=sed</parameter></term>
+ <listitem>
+ <para>This prevents a hard-coded path to
+ <filename>/tools/bin/sed</filename> in the <command>fixincl</command>
+ program.</para>
+ </listitem>
+ </varlistentry>
+
+ </variablelist>
<para os="j">Compile the package:</para>
<screen os="k"><userinput>make</userinput></screen>
<important os="l">
- <para>The test suite for GCC is considered
- critical. Do not skip it under any circumstance.</para>
+ <para>Due to GCC's critical role in a properly functioning system,
+ the CLFS developers strongly recommend running the testsuite.</para>
</important>
<para os="s1">Increase the stack size prior to running the tests:</para>
@@ -98,20 +101,25 @@
<screen os="t"><userinput>make install</userinput></screen>
- <para os="u">Some packages expect the C preprocessor to be installed in the
+ <para os="u">Install the <filename class="headerfile">libiberty</filename> header
+ file that is needed by some packages:</para>
+
+<screen os="v"><userinput>cp -v ../gcc-&gcc-version;/include/libiberty.h /usr/include</userinput></screen>
+
+ <para os="w">Some packages expect the C preprocessor to be installed in the
<filename class="directory">/lib</filename> directory.
To support those packages, create this symlink:</para>
-<screen os="v"><userinput>ln -sv ../usr/bin/cpp /lib</userinput></screen>
+<screen os="x"><userinput>ln -sv ../usr/bin/cpp /lib</userinput></screen>
- <para os="w">Many packages use the name <command>cc</command> to call the C
+ <para os="y">Many packages use the name <command>cc</command> to call the C
compiler. To satisfy those packages, create a symlink:</para>
-<screen os="x"><userinput>ln -sv gcc /usr/bin/cc</userinput></screen>
+<screen os="z"><userinput>ln -sv gcc /usr/bin/cc</userinput></screen>
- <para os="y">Finally, move a misplaced file:</para>
+ <para os="aa">Finally, move a misplaced file:</para>
-<screen os="z"><userinput>mv -v /usr/lib/*gdb.py /usr/share/gdb/auto-load/usr/lib</userinput></screen>
+<screen os="ab"><userinput>mv -v /usr/lib/libstdc++*gdb.py /usr/share/gdb/auto-load/usr/lib</userinput></screen>
</sect2>
@@ -124,10 +132,11 @@
<segtitle>Installed directories</segtitle>
<seglistitem>
- <seg>c++, cc (link to gcc), cpp, g++, gcc, and gcov</seg>
- <seg>libasan.[a,so], libgcc.a, libgcc_eh.a, libgcc_s.so, libgcov.a,
- libgomp.[a,so], libmudflap.[a,so], libmudflapth.[a,so], libssp.[a,so],
- libssp_nonshared.a, libstdc++.[a,so], libsupc++.a, and libtsan.[a,so]</seg>
+ <seg>c++, cc (link to gcc), cpp, g++, gcc, gcov</seg>
+ <seg>libasan.[a,so], libatomic.[a,so], libgcc.a, libgcc_eh.a, libgcc_s.so, libgcov.a,
+ libgomp.[a,so], libiberty.a, libitm.[a,so], liblto_plugin.so, libmudflap.[a,so], libmudflapth.[a,so],
+ libquadmath.[a,so], libssp.[a,so], libssp_nonshared.a, libstdc++.[a,so], libsupc++.a,
+ libtsan.[a,so]</seg>
<seg>/usr/include/c++, /usr/lib/gcc, /usr/share/gcc-&gcc-version;</seg>
</seglistitem>
</segmentedlist>
@@ -209,6 +218,17 @@
</listitem>
</varlistentry>
+ <varlistentry id="libatomic">
+ <term><filename class="libraryfile">libatomic</filename></term>
+ <listitem>
+ <para>A GCC support runtime library for atomic operations not
+ supported by hardware</para>
+ <indexterm zone="ch-system-gcc libatomic">
+ <primary sortas="c-libatomic*">libatomic*</primary>
+ </indexterm>
+ </listitem>
+ </varlistentry>
+
<varlistentry id="libgcc">
<term><filename class="libraryfile">libgcc</filename></term>
<listitem>
@@ -241,6 +261,40 @@
</listitem>
</varlistentry>
+ <varlistentry id="libiberty">
+ <term><filename class="libraryfile">libiberty</filename></term>
+ <listitem>
+ <para>Contains routines used by various GNU programs, including
+ <command>getopt</command>, <command>obstack</command>,
+ <command>strerror</command>, <command>strtol</command>, and
+ <command>strtoul</command></para>
+ <indexterm zone="ch-system-gcc libiberty">
+ <primary sortas="c-libiberty">libiberty</primary>
+ </indexterm>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry id="libitm">
+ <term><filename class="libraryfile">libitm</filename></term>
+ <listitem>
+ <para>The GNU Transactional Memory Library, which provides
+ transaction support for accesses to a process's memory</para>
+ <indexterm zone="ch-system-gcc libitm">
+ <primary sortas="c-libitm*">libitm*</primary>
+ </indexterm>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry id="liblto_plugin">
+ <term><filename class="libraryfile">liblto_plugin</filename></term>
+ <listitem>
+ <para>Runtime library for GCC's link-time optimization plugin</para>
+ <indexterm zone="ch-system-gcc liblto_plugin">
+ <primary sortas="c-liblto_plugin">liblto_plugin</primary>
+ </indexterm>
+ </listitem>
+ </varlistentry>
+
<varlistentry id="libmudflap">
<term><filename class="libraryfile">libmudflap</filename></term>
<listitem>
@@ -251,6 +305,16 @@
</indexterm>
</listitem>
</varlistentry>
+
+ <varlistentry id="libquadmath">
+ <term><filename class="libraryfile">libquadmath</filename></term>
+ <listitem>
+ <para>The GCC Quad-Precision Math Libarary API</para>
+ <indexterm zone="ch-system-gcc libquadmath">
+ <primary sortas="c-libquadmath*">libquadmath*</primary>
+ </indexterm>
+ </listitem>
+ </varlistentry>
<varlistentry id="libssp">
<term><filename class="libraryfile">libssp</filename></term>
diff -ru /home/jp/a/BOOK/cross-tools/64/gcc-static.xml BOOK/cross-tools/64/gcc-static.xml
--- /home/jp/a/BOOK/cross-tools/64/gcc-static.xml 2014-05-11 16:24:52.642516678 +0200
+++ BOOK/cross-tools/64/gcc-static.xml 2014-10-03 20:44:43.904339261 +0200
@@ -24,6 +24,10 @@
and no Threads</title>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
+ href="../common/gcc-static.xml"
+ xpointer="xpointer(//*[@os='e'])"/>
+
+ <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="../../final-system/common/gcc.xml"
xpointer="xpointer(//*[@os='p1'])"/>
diff -ru /home/jp/a/BOOK/final-system/common/gettext.xml BOOK/final-system/common/gettext.xml
--- /home/jp/a/BOOK/final-system/common/gettext.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/gettext.xml 2014-10-03 20:44:43.912339261 +0200
@@ -29,7 +29,7 @@
<para os="a">Prepare Gettext for compilation:</para>
-<screen os="b"><userinput>./configure --prefix=/usr</userinput></screen>
+<screen os="b"><userinput>./configure --prefix=/usr --docdir=/usr/share/doc/gettext-&gettext-version;</userinput></screen>
<para os="c">Compile the package:</para>
@@ -57,10 +57,11 @@
<seg>autopoint, config.charset, config.rpath, envsubst, gettext,
gettext.sh, gettextize, hostname, msgattrib, msgcat, msgcmp, msgcomm,
msgconv, msgen, msgexec, msgfilter, msgfmt, msggrep, msginit, msgmerge,
- msgunfmt, msguniq, ngettext, recode-sr-latin, and xgettext</seg>
+ msgunfmt, msguniq, ngettext, recode-sr-latin, xgettext</seg>
<seg>libasprintf.[a,so], libgettextlib.so, libgettextpo.[a,so],
- libgettextsrc.so, and preloadable_libintl.so</seg>
- <seg>/usr/lib/gettext, /usr/share/doc/gettext, /usr/share/gettext</seg>
+ libgettextsrc.so, preloadable_libintl.so</seg>
+ <seg>/usr/lib/gettext, /usr/share/doc/gettext-&gettext-version;,
+ /usr/share/gettext</seg>
</seglistitem>
</segmentedlist>
diff -ru /home/jp/a/BOOK/final-system/common/gmp.xml BOOK/final-system/common/gmp.xml
--- /home/jp/a/BOOK/final-system/common/gmp.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/gmp.xml 2014-10-03 20:44:43.912339261 +0200
@@ -50,24 +50,28 @@
<screen os="b"><userinput>CC="gcc -isystem /usr/include" \
CXX="g++ -isystem /usr/include" \
LDFLAGS="-Wl,-rpath-link,/usr/lib:/lib" \
- ./configure --prefix=/usr --enable-cxx</userinput></screen>
+ ./configure --prefix=/usr --enable-cxx \
+ --docdir=/usr/share/doc/gmp-&gmp-version;</userinput></screen>
<para os="c">Compile the package:</para>
<screen os="d"><userinput>make</userinput></screen>
- <important os="e">
- <para>The test suite for GMP is considered
- critical. Do not skip it under any circumstance.</para>
- </important>
+ <para os="e">Build the HTML documentation:</para>
- <para os="f">Test the results:</para>
+<screen os="f"><userinput>make html</userinput></screen>
-<screen os="g"><userinput remap="test">make check</userinput></screen>
+ <para os="g">Test the results:</para>
- <para os="h">Install the package:</para>
+<screen os="h"><userinput remap="test">make check</userinput></screen>
-<screen os="i"><userinput>make install</userinput></screen>
+ <para os="i">Install the package:</para>
+
+<screen os="j"><userinput>make install</userinput></screen>
+
+ <para os="k">Install the documentation:</para>
+
+<screen os="l"><userinput>make install-html</userinput></screen>
</sect2>
@@ -76,9 +80,11 @@
<segmentedlist>
<segtitle>Installed libraries</segtitle>
+ <segtitle>Installed directory</segtitle>
<seglistitem>
- <seg>libgmp.[a,so], libgmpxx.[a,so], libmp.[a,so]</seg>
+ <seg>libgmp.[a,so], libgmpxx.[a,so]</seg>
+ <seg>/usr/share/doc/gmp-&gmp-version;</seg>
</seglistitem>
</segmentedlist>
@@ -106,16 +112,6 @@
</indexterm>
</listitem>
</varlistentry>
-
- <varlistentry id="libmp">
- <term><filename class="libraryfile">libmp</filename></term>
- <listitem>
- <para>Contains the Berkeley MP compatibility library.</para>
- <indexterm zone="ch-system-gmp libmp">
- <primary sortas="c-libmp">libmp</primary>
- </indexterm>
- </listitem>
- </varlistentry>
</variablelist>
diff -ru /home/jp/a/BOOK/final-system/common/grep.xml BOOK/final-system/common/grep.xml
--- /home/jp/a/BOOK/final-system/common/grep.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/grep.xml 2014-10-03 20:44:43.912339261 +0200
@@ -50,7 +50,7 @@
<segtitle>Installed programs</segtitle>
<seglistitem>
- <seg>egrep, fgrep, and grep</seg>
+ <seg>egrep, fgrep, grep</seg>
</seglistitem>
</segmentedlist>
diff -ru /home/jp/a/BOOK/final-system/common/groff.xml BOOK/final-system/common/groff.xml
--- /home/jp/a/BOOK/final-system/common/groff.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/groff.xml 2014-10-03 20:44:43.912339261 +0200
@@ -44,13 +44,6 @@
<screen os="h"><userinput>make install</userinput></screen>
- <para os="i">Some documentation programs, such as <command>xman</command>,
- will not work properly without the following symlinks:</para>
-
-<screen os="j"><userinput>ln -sv soelim /usr/bin/zsoelim
-ln -sv eqn /usr/bin/geqn
-ln -sv tbl /usr/bin/gtbl</userinput></screen>
-
</sect2>
<sect2 id="contents-groff" role="content">
@@ -61,13 +54,12 @@
<segtitle>Installed directories</segtitle>
<seglistitem>
- <seg>addftinfo, afmtodit, chem, eqn, eqn2graph, gdiffmk,
- geqn (link to eqn), grap2graph, grn, grodvi, groff, groffer, grog,
- grolbp, grolj4, grops, grotty, gtbl (link to tbl), hpftodit, indxbib,
- lkbib, lookbib, mmroff, neqn, nroff, pdfroff, pfbtops, pic, pic2graph,
- post-grohtml, pre-grohtml, preconv, refer, roff2dvi, roff2html,
- roff2pdf, roff2ps, roff2text, roff2x, soelim, tbl, tfmtodit, troff,
- and zsoelim (link to soelim)</seg>
+ <seg>addftinfo, afmtodit, chem, eqn, eqn2graph, gdiffmk, grap2graph,
+ grn, grodvi, groff, groffer, grog, grolbp, grolj4, grops, grotty,
+ hpftodit, indxbib, lkbib, lookbib, mmroff, neqn, nroff, pdfroff,
+ pfbtops, pic, pic2graph, post-grohtml, pre-grohtml, preconv, refer,
+ roff2dvi, roff2html, roff2pdf, roff2ps, roff2text, roff2x, soelim,
+ tbl, tfmtodit, troff</seg>
<seg>/usr/lib/groff, /usr/share/doc/groff-&groff-version;, /usr/share/groff</seg>
</seglistitem>
</segmentedlist>
@@ -141,16 +133,6 @@
</listitem>
</varlistentry>
- <varlistentry id="geqn">
- <term><command>geqn</command></term>
- <listitem>
- <para>A link to <command>eqn</command></para>
- <indexterm zone="ch-system-groff geqn">
- <primary sortas="b-geqn">geqn</primary>
- </indexterm>
- </listitem>
- </varlistentry>
-
<varlistentry id="grap2graph">
<term><command>grap2graph</command></term>
<listitem>
@@ -263,16 +245,6 @@
</listitem>
</varlistentry>
- <varlistentry id="gtbl">
- <term><command>gtbl</command></term>
- <listitem>
- <para>A link to <command>tbl</command></para>
- <indexterm zone="ch-system-groff gtbl">
- <primary sortas="b-gtbl">gtbl</primary>
- </indexterm>
- </listitem>
- </varlistentry>
-
<varlistentry id="hpftodit">
<term><command>hpftodit</command></term>
<listitem>
@@ -551,16 +523,6 @@
</indexterm>
</listitem>
</varlistentry>
-
- <varlistentry id="zsoelim">
- <term><command>zsoelim</command></term>
- <listitem>
- <para>A link to <command>soelim</command></para>
- <indexterm zone="ch-system-groff zsoelim">
- <primary sortas="b-zsoelim">zsoelim</primary>
- </indexterm>
- </listitem>
- </varlistentry>
</variablelist>
diff -ru /home/jp/a/BOOK/final-system/common/gzip.xml BOOK/final-system/common/gzip.xml
--- /home/jp/a/BOOK/final-system/common/gzip.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/gzip.xml 2014-10-03 20:44:43.912339261 +0200
@@ -56,7 +56,7 @@
<seglistitem>
<seg>gunzip, gzexe, gzip, uncompress, zcat, zcmp, zdiff,
- zegrep, zfgrep, zforce, zgrep, zless, zmore, and znew</seg>
+ zegrep, zfgrep, zforce, zgrep, zless, zmore, znew</seg>
</seglistitem>
</segmentedlist>
diff -ru /home/jp/a/BOOK/final-system/common/iana-etc.xml BOOK/final-system/common/iana-etc.xml
--- /home/jp/a/BOOK/final-system/common/iana-etc.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/iana-etc.xml 2014-10-03 20:44:43.912339261 +0200
@@ -25,7 +25,8 @@
<sect2 role="installation">
<title>Installation of Iana-Etc</title>
- <para os="p2">The following patch updates the services and protocol xml files:</para>
+ <para os="p2">The following patch contains xml files which provide updates
+ to the services and protocol files:</para>
<screen os="p3"><userinput>xzcat ../&iana-etc-numbers_update-patch; | patch -Np1 -i -</userinput></screen>
@@ -50,7 +51,7 @@
<segtitle>Installed files</segtitle>
<seglistitem>
- <seg>/etc/protocols and /etc/services</seg>
+ <seg>/etc/protocols, /etc/services</seg>
</seglistitem>
</segmentedlist>
diff -ru /home/jp/a/BOOK/final-system/common/iproute2.xml BOOK/final-system/common/iproute2.xml
--- /home/jp/a/BOOK/final-system/common/iproute2.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/iproute2.xml 2014-10-03 20:44:43.912339261 +0200
@@ -35,48 +35,17 @@
<screen os="s2"><userinput>sed -i '/^TARGETS/s@arpd@@g' misc/Makefile
sed -i '/ARPD/d' Makefile
-rm -v man/man8/arpd.8</userinput></screen>
-
- <para os="f1">Remove unused libnl headers:</para>
-
- <screen os="f2"><userinput>sed -i '/netlink\//d' ip/ipl2tp.c</userinput></screen>
+sed -i 's/arpd.8//' man/man8/Makefile</userinput></screen>
<para os="a">Compile the package:</para>
-<screen os="b"><userinput>make DESTDIR= DOCDIR=/usr/share/doc/iproute2 \
- MANDIR=/usr/share/man</userinput></screen>
-
- <variablelist os="c">
- <title>The meaning of the make option:</title>
-
- <varlistentry>
- <term><parameter>DESTDIR=</parameter></term>
- <listitem>
- <para>This option overrides the default DESTDIR of /usr, so that
- that the IPRoute2 binaries will be installed into
- <filename class="directory">/sbin</filename>. This is the correct
- location according to the FHS, because some of the IPRoute2 binaries
- are used by the CLFS-Bootscripts package.</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term><parameter>DOCDIR=/usr/share/doc/iproute2 MANDIR=/usr/share/man</parameter></term>
- <listitem>
- <para>The DESTDIR=/ parameter would cause documentation to be
- installed into <filename class="directory">/share/doc</filename> and
- <filename class="directory">/share/man</filename>. These options
- ensure the docs are installed to the correct locations.</para>
- </listitem>
- </varlistentry>
- </variablelist>
+<screen os="b"><userinput>make</userinput></screen>
- <para os="d">This package does not come with a test suite.</para>
+ <para os="c">This package does not come with a test suite.</para>
- <para os="e">Install the package:</para>
+ <para os="d">Install the package:</para>
-<screen os="f"><userinput>make DESTDIR= DOCDIR=/usr/share/doc/iproute2 \
- MANDIR=/usr/share/man install</userinput></screen>
+<screen os="e"><userinput>make DOCDIR=/usr/share/doc/iproute2-&iproute2-version; install</userinput></screen>
</sect2>
@@ -90,8 +59,9 @@
<seglistitem>
<seg>bridge, ctstat (link to lnstat), genl, ifcfg, ifstat, ip, lnstat,
nstat, routef, routel, rtacct, rtmon, rtpr, rtstat (link to lnstat), ss,
- and tc</seg>
- <seg>/etc/iproute2, /lib/tc, /usr/lib/tc, /usr/share/doc/iproute2</seg>
+ tc</seg>
+ <seg>/etc/iproute2, /usr/lib/tc,
+ /usr/share/doc/iproute2-&iproute2-version;</seg>
</seglistitem>
</segmentedlist>
diff -ru /home/jp/a/BOOK/final-system/common/iputils.xml BOOK/final-system/common/iputils.xml
--- /home/jp/a/BOOK/final-system/common/iputils.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/iputils.xml 2014-10-03 20:44:43.912339261 +0200
@@ -31,7 +31,7 @@
<para os="a">Compile the package:</para>
-<screen os="b"><userinput>make USE_CAP=no \
+<screen os="b"><userinput>make \
IPV4_TARGETS="tracepath ping clockdiff rdisc" \
IPV6_TARGETS="tracepath6 traceroute6"</userinput></screen>
@@ -55,7 +55,7 @@
<segtitle>Installed programs</segtitle>
<seglistitem>
- <seg>clockdiff, ping, rdisc, tracepath, tracepath6, and traceroute6</seg>
+ <seg>clockdiff, ping, rdisc, tracepath, tracepath6, traceroute6</seg>
</seglistitem>
</segmentedlist>
diff -ru /home/jp/a/BOOK/final-system/common/isl.xml BOOK/final-system/common/isl.xml
--- /home/jp/a/BOOK/final-system/common/isl.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/isl.xml 2014-10-03 20:44:43.912339261 +0200
@@ -35,23 +35,18 @@
<screen os="d"><userinput>make</userinput></screen>
- <important os="e">
- <para>The test suite for ISL is considered
- critical. Do not skip it under any circumstance.</para>
- </important>
+ <para os="e">Test the results:</para>
- <para os="f">Test the results:</para>
+<screen os="f"><userinput remap="test">make check</userinput></screen>
-<screen os="g"><userinput remap="test">make check</userinput></screen>
+ <para os="g">Install the package:</para>
- <para os="h">Install the package:</para>
+<screen os="h"><userinput>make install</userinput></screen>
-<screen os="i"><userinput>make install</userinput></screen>
+ <para os="i">Finally, move a misplaced file:</para>
- <para os="j">Finally, move a misplaced file:</para>
-
-<screen os="k"><userinput>mkdir -pv /usr/share/gdb/auto-load/usr/lib
-mv -v /usr/lib/*gdb.py /usr/share/gdb/auto-load/usr/lib</userinput></screen>
+<screen os="j"><userinput>mkdir -pv /usr/share/gdb/auto-load/usr/lib
+mv -v /usr/lib/libisl*gdb.py /usr/share/gdb/auto-load/usr/lib</userinput></screen>
</sect2>
<sect2 id="contents-isl" role="content">
@@ -59,9 +54,11 @@
<segmentedlist>
<segtitle>Installed libraries</segtitle>
+ <segtitle>Installed directory</segtitle>
<seglistitem>
<seg>libisl.[a,so]</seg>
+ <seg>/usr/include/isl</seg>
</seglistitem>
</segmentedlist>
diff -ru /home/jp/a/BOOK/final-system/common/kbd.xml BOOK/final-system/common/kbd.xml
--- /home/jp/a/BOOK/final-system/common/kbd.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/kbd.xml 2014-10-03 20:44:43.912339261 +0200
@@ -30,22 +30,56 @@
<screen os="b"><userinput>PKG_CONFIG_PATH="/tools/lib/pkgconfig" \
./configure --prefix=/usr --disable-vlock --enable-optional-progs</userinput></screen>
- <para os="c">Compile the package:</para>
+ <variablelist os="c">
+ <title>The meaning of the new configure options:</title>
-<screen os="d"><userinput>make</userinput></screen>
+ <varlistentry>
+ <term><envar>PKG_CONFIG_PATH</envar></term>
+ <listitem>
+ <para>Use pkg-config to obtain the location of the test library
+ metadata built in <xref linkend="ch-temp-system-check"/>.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><envar>--disable-vlock</envar></term>
+ <listitem>
+ <para>Prevents Kbd from trying to build the
+ <command>vlock</command> program, which requires Linux-PAM.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><envar>--enable-optional-progs</envar></term>
+ <listitem>
+ <para>Installs several additional programs.</para>
+ </listitem>
+ </varlistentry>
+
+ </variablelist>
+
+ <para os="d">Compile the package:</para>
+
+<screen os="e"><userinput>make</userinput></screen>
+
+ <para os="f">To test the results, issue:</para>
+
+<screen os="g"><userinput remap="test">make check</userinput></screen>
+
+ <para os="h">Install the package:</para>
- <para os="e">This package does not come with a test suite.</para>
+<screen os="i"><userinput>make install</userinput></screen>
- <para os="f">Install the package:</para>
+ <para os="j">Some of the programs from Kbd are used by systemd to
+ initialize the system, so those binaries need to be on the root
+ partition:</para>
-<screen os="g"><userinput>make install</userinput></screen>
+<screen os="k"><userinput>mv -v /usr/bin/{loadkeys,setfont} /bin</userinput></screen>
- <para os="h">Some of the programs from Kbd are used by scripts
- in the CLFS-Bootscripts package. As <filename
- class="directory">/usr</filename> may not be available during the early
- stages of booting, those binaries need to be on the root partition:</para>
+ <para os="l">Install the documentation:</para>
-<screen os="i"><userinput>mv -v /usr/bin/{kbd_mode,dumpkeys,loadkeys,openvt,setfont,setvtrgb} /bin</userinput></screen>
+<screen os="m"><userinput>mkdir -v /usr/share/doc/kbd-&kbd-version;
+cp -R -v docs/doc/* /usr/share/doc/kbd-&kbd-version;</userinput></screen>
</sect2>
@@ -62,8 +96,9 @@
(link to psfxtable), psfgettable (link to psfxtable), psfstriptable
(link to psfxtable), psfxtable, resizecons, setfont, setkeycodes,
setleds, setmetamode, setvtrgb, showconsolefont, showkey,
- unicode_start, and unicode_stop</seg>
+ unicode_start, unicode_stop</seg>
<seg>/usr/share/consolefonts, /usr/share/consoletrans,
+ /usr/share/doc/kbd-&kbd-version;,
/usr/share/keymaps, /usr/share/unimaps</seg>
</seglistitem>
</segmentedlist>
@@ -198,7 +233,7 @@
<varlistentry id="psfaddtable">
<term><command>psfaddtable</command></term>
<listitem>
- <para>A link to <command>psfxtable</command></para>
+ <para>Adds a Unicode character table to a console font</para>
<indexterm zone="ch-system-kbd psfaddtable">
<primary sortas="b-psfaddtable">psfaddtable</primary>
</indexterm>
@@ -208,7 +243,8 @@
<varlistentry id="psfgettable">
<term><command>psfgettable</command></term>
<listitem>
- <para>A link to <command>psfxtable</command></para>
+ <para>Extracts the embedded Unicode character table from a console
+ font</para>
<indexterm zone="ch-system-kbd psfgettable">
<primary sortas="b-psfgettable">psfgettable</primary>
</indexterm>
@@ -218,7 +254,8 @@
<varlistentry id="psfstriptable">
<term><command>psfstriptable</command></term>
<listitem>
- <para>A link to <command>psfxtable</command></para>
+ <para>Removes the embedded Unicode character table from a console
+ font</para>
<indexterm zone="ch-system-kbd psfstriptable">
<primary sortas="b-psfstriptable">psfstriptable</primary>
</indexterm>
diff -ru /home/jp/a/BOOK/cross-tools/common/binutils.xml BOOK/cross-tools/common/binutils.xml
--- /home/jp/a/BOOK/cross-tools/common/binutils.xml 2014-05-11 16:24:52.642516678 +0200
+++ BOOK/cross-tools/common/binutils.xml 2014-10-03 20:44:43.904339261 +0200
@@ -49,9 +49,9 @@
xpointer="xpointer(//*[@os='i'])"/>
<screen os="bc"><userinput>AR=ar AS=as ../binutils-&binutils-dir;/configure \
- --prefix=/cross-tools --host=${CLFS_HOST} --target=${CLFS_TARGET} \
- --with-sysroot=${CLFS} --with-lib-path=/tools/lib --disable-nls \
- --disable-static --enable-64-bit-bfd --disable-multilib</userinput></screen>
+ --prefix=/cross-tools --host=${CLFS_HOST} --target=${CLFS_TARGET} \
+ --with-sysroot=${CLFS} --with-lib-path=/tools/lib --disable-nls \
+ --disable-static --disable-multilib --disable-werror</userinput></screen>
<variablelist os="bd">
<title>The meaning of the new configure options:</title>
@@ -68,20 +68,30 @@
<varlistentry os="bd2">
<term><parameter>--host=${CLFS_HOST}</parameter></term>
<listitem>
- <para>When used with --target, this creates a cross-architecture
- executable that creates files for ${CLFS_TARGET} but runs on ${CLFS_HOST}.</para>
+ <para>When used with <option>--target</option>, this creates a
+ cross-architecture executable which creates files for
+ ${CLFS_TARGET} but runs on ${CLFS_HOST}.</para>
</listitem>
</varlistentry>
<varlistentry os="bd3">
<term><parameter>--target=${CLFS_TARGET}</parameter></term>
<listitem>
- <para>When used with --host, this creates a cross-architecture
- executable that creates files for ${CLFS_TARGET} but runs on ${CLFS_HOST}.</para>
+ <para>When used with <option>--host</option>, this creates a
+ cross-architecture executable that creates files for
+ ${CLFS_TARGET} but runs on ${CLFS_HOST}.</para>
</listitem>
</varlistentry>
<varlistentry os="bd4">
+ <term><parameter>--with-sysroot=${CLFS}</parameter></term>
+ <listitem>
+ <para>Tells configure to build a linker that uses ${CLFS} as its
+ root directory for its search paths.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry os="bd5">
<term><parameter>--with-lib-path=/tools/lib</parameter></term>
<listitem>
<para>This tells the configure script to specify the library
@@ -92,7 +102,7 @@
</listitem>
</varlistentry>
- <varlistentry os="bd5">
+ <varlistentry os="bd6">
<term><parameter>--disable-nls</parameter></term>
<listitem>
<para>This disables internationalization as i18n is not needed for the
@@ -100,7 +110,7 @@
</listitem>
</varlistentry>
- <varlistentry os="bd6">
+ <varlistentry os="bd7">
<term><parameter>--disable-multilib</parameter></term>
<listitem>
<para>This option disables the building of a multilib
@@ -108,10 +118,11 @@
</listitem>
</varlistentry>
- <varlistentry os="bd7">
- <term><parameter>--enable-64-bit-bfd</parameter></term>
+ <varlistentry os="bd8">
+ <term><parameter>--disable-werror</parameter></term>
<listitem>
- <para>This adds 64 bit support to Binutils.</para>
+ <para>This prevents the build from stopping in the event that there
+ are warnings from the host's compiler.</para>
</listitem>
</varlistentry>
@@ -119,31 +130,12 @@
<para os="be">Compile the package:</para>
-<screen os="bf"><userinput>make configure-host
-make</userinput></screen>
-
- <variablelist os="bg">
- <title>The meaning of the make options:</title>
-
- <varlistentry os="bg1">
- <term><parameter>configure-host</parameter></term>
- <listitem>
- <para>This checks the host environment and makes sure all the
- necessary tools are available to compile Binutils.</para>
- </listitem>
- </varlistentry>
-
- </variablelist>
+<screen os="bf"><userinput>make</userinput></screen>
<para os="bh">Install the package:</para>
<screen os="bi"><userinput>make install</userinput></screen>
- <para os="bj">Copy <filename class="headerfile">libiberty.h</filename> to
- <filename class="directory">/tools/include</filename> directory:</para>
-
-<screen os="bk"><userinput>cp -v ../binutils-&binutils-dir;/include/libiberty.h /tools/include</userinput></screen>
-
</sect2>
<sect2 role="content">
diff -ru /home/jp/a/BOOK/final-system/common/kmod.xml BOOK/final-system/common/kmod.xml
--- /home/jp/a/BOOK/final-system/common/kmod.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/kmod.xml 2014-10-03 20:44:43.912339261 +0200
@@ -18,7 +18,7 @@
<title/>
<para>The Kmod package contains programs for loading, inserting
- and removing kernel modules for Linux. Kmod replaces the
+ and removing kernel modules for Linux. Kmod replaces the
Module-Init-tools package.</para>
</sect2>
@@ -30,7 +30,7 @@
<screen os="b"><userinput>./configure --prefix=/usr \
--bindir=/bin --sysconfdir=/etc \
- --with-rootlibdir=/lib --disable-manpages \
+ --with-rootlibdir=/lib \
--with-zlib --with-xz</userinput></screen>
<variablelist os="c">
@@ -63,18 +63,15 @@
<para os="g">Install the package:</para>
-<screen os="h"><userinput>make install
-make -C man install</userinput></screen>
+<screen os="h"><userinput>make install</userinput></screen>
- <para os="i">Create symbolic links for programs that expect Module-Init-Tools.</para>
+ <para os="i">Create symbolic links for programs that expect Module-Init-Tools:</para>
<screen os="j"><userinput>ln -sfv kmod /bin/lsmod
-ln -sfv ../bin/kmod /sbin/depmod
-ln -sfv ../bin/kmod /sbin/insmod
-ln -sfv ../bin/kmod /sbin/modprobe
-ln -sfv ../bin/kmod /sbin/modinfo
-ln -sfv ../bin/kmod /sbin/rmmod</userinput></screen>
-
+for tool in depmod insmod modinfo modprobe rmmod; do
+ ln -sfv ../bin/kmod /sbin/${tool}
+done</userinput></screen>
+
</sect2>
<sect2 id="contents-kmod" role="content">
@@ -84,8 +81,9 @@
<segtitle>Installed programs</segtitle>
<seglistitem>
- <seg>depmod, insmod, kmod, lsmod, modinfo, modprobe, and
- rmmod</seg>
+ <seg>depmod (link to kmod), insmod (link to kmod), kmod,
+ lsmod (link to kmod), modinfo (link to kmod), modprobe (link to kmod),
+ rmmod (link to kmod) </seg>
</seglistitem>
</segmentedlist>
diff -ru /home/jp/a/BOOK/final-system/common/less.xml BOOK/final-system/common/less.xml
--- /home/jp/a/BOOK/final-system/common/less.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/less.xml 2014-10-03 20:44:43.912339261 +0200
@@ -28,33 +28,20 @@
<screen os="b"><userinput>./configure --prefix=/usr --sysconfdir=/etc</userinput></screen>
- <variablelist os="c">
- <title>The meaning of the configure option:</title>
+ <para os="c">Compile the package:</para>
- <varlistentry>
- <term><parameter>--sysconfdir=/etc</parameter></term>
- <listitem>
- <para>This option tells the programs created by the package to look
- in <filename class="directory">/etc</filename> for the configuration
- files.</para>
- </listitem>
- </varlistentry>
- </variablelist>
+<screen os="d"><userinput>make</userinput></screen>
- <para os="d">Compile the package:</para>
+ <para os="e">This package does not come with a test suite.</para>
-<screen os="e"><userinput>make</userinput></screen>
+ <para os="f">Install the package:</para>
- <para os="f">This package does not come with a test suite.</para>
+<screen os="g"><userinput>make install</userinput></screen>
- <para os="g">Install the package:</para>
-
-<screen os="h"><userinput>make install</userinput></screen>
-
- <para os="i">Move <command>less</command> to
+ <para os="h">Move <command>less</command> to
<filename class="directory">/bin</filename>:</para>
-<screen os="j"><userinput>mv -v /usr/bin/less /bin</userinput></screen>
+<screen os="i"><userinput>mv -v /usr/bin/less /bin</userinput></screen>
</sect2>
@@ -65,7 +52,7 @@
<segtitle>Installed programs</segtitle>
<seglistitem>
- <seg>less, lessecho, and lesskey</seg>
+ <seg>less, lessecho, lesskey</seg>
</seglistitem>
</segmentedlist>
diff -ru /home/jp/a/BOOK/final-system/common/libtool.xml BOOK/final-system/common/libtool.xml
--- /home/jp/a/BOOK/final-system/common/libtool.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/libtool.xml 2014-10-03 20:44:43.912339261 +0200
@@ -53,7 +53,7 @@
<segtitle>Installed directories</segtitle>
<seglistitem>
- <seg>libtool and libtoolize</seg>
+ <seg>libtool, libtoolize</seg>
<seg>libltdl.[a,so]</seg>
<seg>/usr/include/libltdl, /usr/share/libtool</seg>
</seglistitem>
diff -ru /home/jp/a/BOOK/final-system/common/linux-headers.xml BOOK/final-system/common/linux-headers.xml
--- /home/jp/a/BOOK/final-system/common/linux-headers.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/linux-headers.xml 2014-10-03 20:44:43.916339261 +0200
@@ -8,24 +8,37 @@
<sect1 id="ch-system-linux-headers" role="wrap">
<?dbhtml filename="linux-headers.html"?>
- <title>Linux-Headers-&linux-version;</title>
+ <title>Linux-&linux-version2; Headers</title>
<indexterm zone="ch-system-linux-headers">
- <primary sortas="a-Linux-Headers">Linux-Headers</primary>
+ <primary sortas="a-Linux Headers">Linux Headers</primary>
</indexterm>
<sect2 role="package">
<title/>
- <para>The Linux Kernel contains a make target that installs
- <quote>sanitized</quote> kernel headers.</para>
+ <para>The Linux Kernel contains a <command>make</command> target that
+ installs <quote>sanitized</quote> kernel headers.</para>
</sect2>
<sect2 role="installation">
- <title>Installation of Linux-Headers</title>
+ <title>Installation of Linux Headers</title>
- <para os="a">For this step you will need the kernel tarball.</para>
+ <note os="a">
+ <para>For this step you will need to unpack the kernel tarball
+ (<filename>linux-&linux-version;.tar.xz</filename>) and
+ <command>cd</command> into its source
+ directory before entering the commands on this page.</para>
+ </note>
+
+ <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
+ href="../../bootable/x86/kernel.xml"
+ xpointer="xpointer(//*[@os='p1'])"/>
+
+ <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
+ href="../../bootable/x86/kernel.xml"
+ xpointer="xpointer(//*[@os='p2'])"/>
<para os="b">Install the kernel header files:</para>
@@ -72,7 +85,7 @@
</sect2>
<sect2 id="contents-linux-headers" role="content">
- <title>Contents of Linux-Headers</title>
+ <title>Contents of Linux Headers</title>
<segmentedlist>
<segtitle>Installed headers</segtitle>
diff -ru /home/jp/a/BOOK/final-system/common/man-pages.xml BOOK/final-system/common/man-pages.xml
--- /home/jp/a/BOOK/final-system/common/man-pages.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/man-pages.xml 2014-10-03 20:44:43.916339261 +0200
@@ -17,7 +17,7 @@
<sect2 role="package">
<title/>
- <para>The Man-pages package contains over 1,200 man pages.</para>
+ <para>The Man-pages package contains over 2,200 man pages.</para>
</sect2>
@@ -50,11 +50,11 @@
<term><filename>man pages</filename></term>
<listitem>
<para>This package contains man pages that describe the following:
- POSIX headers (section 0p),
+ POSIX headers (section 0p),
POSIX utilities (section 1p), POSIX functions (section 3p),
- user commands (section 1), system calls (section 2),
- libc calls (section 3), device information (section 4),
- file formats (section 5), games (section 6),
+ user commands (section 1), system calls (section 2),
+ libc calls (section 3), device information (section 4),
+ file formats (section 5), games (section 6),
conventions and macro packages (section 7),
system administration (section 8), and
kernel (section 9).</para>
diff -ru /home/jp/a/BOOK/final-system/common/mpc.xml BOOK/final-system/common/mpc.xml
--- /home/jp/a/BOOK/final-system/common/mpc.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/mpc.xml 2014-10-03 20:44:43.916339261 +0200
@@ -29,24 +29,27 @@
<screen os="b"><userinput>CC="gcc -isystem /usr/include" \
LDFLAGS="-Wl,-rpath-link,/usr/lib:/lib" \
- ./configure --prefix=/usr</userinput></screen>
+ ./configure --prefix=/usr --docdir=/usr/share/doc/mpc-&mpc-version;</userinput></screen>
<para os="c">Compile the package:</para>
<screen os="d"><userinput>make</userinput></screen>
- <important os="e">
- <para>The test suite for MPC is considered
- critical. Do not skip it under any circumstance.</para>
- </important>
+ <para os="e">Build the HTML documentation:</para>
- <para os="f">Test the results:</para>
+<screen os="f"><userinput>make html</userinput></screen>
-<screen os="g"><userinput remap="test">make check</userinput></screen>
+ <para os="g">Test the results:</para>
- <para os="h">Install the package:</para>
+<screen os="h"><userinput remap="test">make check</userinput></screen>
-<screen os="i"><userinput>make install</userinput></screen>
+ <para os="i">Install the package:</para>
+
+<screen os="j"><userinput>make install</userinput></screen>
+
+ <para os="k">Install the HTML documentation:</para>
+
+<screen os="l"><userinput>make install-html</userinput></screen>
</sect2>
@@ -55,9 +58,11 @@
<segmentedlist>
<segtitle>Installed libraries</segtitle>
+ <segtitle>Installed directory</segtitle>
<seglistitem>
<seg>libmpc.[a,so]</seg>
+ <seg>/usr/share/doc/mpc-&mpc-version;</seg>
</seglistitem>
</segmentedlist>
diff -ru /home/jp/a/BOOK/final-system/common/mpfr.xml BOOK/final-system/common/mpfr.xml
--- /home/jp/a/BOOK/final-system/common/mpfr.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/mpfr.xml 2014-10-03 20:44:43.916339261 +0200
@@ -32,26 +32,21 @@
<para os="a">Prepare MPFR for compilation:</para>
<screen os="b"><userinput>CC="gcc -isystem /usr/include" \
-LDFLAGS="-Wl,-rpath-link,/usr/lib:/lib" \
- ./configure --prefix=/usr --enable-shared \
- --with-gmp=/usr</userinput></screen>
+ LDFLAGS="-Wl,-rpath-link,/usr/lib:/lib" \
+ ./configure --prefix=/usr --with-gmp=/usr \
+ --docdir=/usr/share/doc/mpfr-&mpfr-version;</userinput></screen>
<para os="c">Compile the package:</para>
<screen os="d"><userinput>make</userinput></screen>
- <important os="e">
- <para>The test suite for MPFR is considered
- critical. Do not skip it under any circumstance.</para>
- </important>
+ <para os="e">Test the results:</para>
- <para os="f">Test the results:</para>
+<screen os="f"><userinput remap="test">make check</userinput></screen>
-<screen os="g"><userinput remap="test">make check</userinput></screen>
+ <para os="g">Install the package:</para>
- <para os="h">Install the package:</para>
-
-<screen os="i"><userinput>make install</userinput></screen>
+<screen os="h"><userinput>make install</userinput></screen>
</sect2>
@@ -64,7 +59,7 @@
<seglistitem>
<seg>libmpfr.[a,so]</seg>
- <seg>/usr/share/doc/mpfr</seg>
+ <seg>/usr/share/doc/mpfr-&mpfr-version;</seg>
</seglistitem>
</segmentedlist>
diff -ru /home/jp/a/BOOK/final-system/common/ncurses.xml BOOK/final-system/common/ncurses.xml
--- /home/jp/a/BOOK/final-system/common/ncurses.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/ncurses.xml 2014-10-03 20:44:43.916339261 +0200
@@ -34,16 +34,35 @@
<screen os="b"><userinput>./configure --prefix=/usr --libdir=/lib \
--with-shared --without-debug --enable-widec \
- --with-manpage-format=normal \
+ --with-manpage-format=normal --enable-pc-files \
--with-default-terminfo-dir=/usr/share/terminfo</userinput></screen>
+ <variablelist os="b1">
+ <title>The meaning of the new configure option:</title>
+
+ <varlistentry>
+ <term><parameter>--with-manpage-format=normal</parameter></term>
+ <listitem>
+ <para>This tells Ncurses not to compress its installed manpages.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><parameter>--enable-pc-files</parameter></term>
+ <listitem>
+ <para>This tells Ncurses to generate and install .pc files for
+ <command>pkg-config</command>.</para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+
<para os="c">Compile the package:</para>
<screen os="d"><userinput>make</userinput></screen>
- <para os="e">This package has a test suite, and can be ran after the
- package is installed. The tests are in the
- <filename class="directory">test/</filename> directory. See the
+ <para os="e">This package has a test suite, but it can only be run after
+ the package is installed. The tests are in the
+ <filename class="directory">test/</filename> directory. See the
<filename>README</filename> file in that directory for details.</para>
<para os="f">Install the package:</para>
@@ -56,17 +75,19 @@
<para os="j">Create symlinks in <filename class="directory">/usr/lib:</filename></para>
-<screen os="k"><userinput>rm -v /lib/lib{ncursesw,menuw,panelw,formw}.so
-ln -svf ../../lib/libncursesw.so.5 /usr/lib/libncursesw.so
-ln -svf ../../lib/libmenuw.so.5 /usr/lib/libmenuw.so
-ln -svf ../../lib/libpanelw.so.5 /usr/lib/libpanelw.so
-ln -svf ../../lib/libformw.so.5 /usr/lib/libformw.so</userinput></screen>
-
- <para os="l">Now we will make our Ncurses compatible for older and non-widec compatible programs
- can build properly:</para>
+<screen os="k"><userinput>ln -svf ../../lib/$(readlink /lib/libncursesw.so) /usr/lib/libncursesw.so
+ln -svf ../../lib/$(readlink /lib/libmenuw.so) /usr/lib/libmenuw.so
+ln -svf ../../lib/$(readlink /lib/libpanelw.so) /usr/lib/libpanelw.so
+ln -svf ../../lib/$(readlink /lib/libformw.so) /usr/lib/libformw.so
+rm -v /lib/lib{ncursesw,menuw,panelw,formw}.so</userinput></screen>
+
+ <para os="l">Many packages that use Ncurses will compile just fine against
+ the widechar libraries, but won't know to look for them. Create linker
+ scripts and symbolic links to allow older and non-widec compatible
+ programs to build properly:</para>
<screen os="m"><userinput>for lib in curses ncurses form panel menu ; do
- echo "INPUT(-l${lib}w)" > /usr/lib/lib${lib}.so
+ echo "INPUT(-l${lib}w)" &gt; /usr/lib/lib${lib}.so
ln -sfv lib${lib}w.a /usr/lib/lib${lib}.a
done
ln -sfv libncursesw.so /usr/lib/libcursesw.so
@@ -74,11 +95,6 @@
ln -sfv libncurses++w.a /usr/lib/libncurses++.a
ln -sfv ncursesw5-config /usr/bin/ncurses5-config</userinput></screen>
- <para os="n">Now we will create a symlink for /usr/share/terminfo in
- <filename class="directory">/usr/lib</filename> for compatibility:</para>
-
-<screen os="o"><userinput>ln -sfv ../share/terminfo /usr/lib/terminfo</userinput></screen>
-
</sect2>
<sect2 id="contents-ncurses" role="content">
@@ -91,9 +107,9 @@
<seglistitem>
<seg>captoinfo (link to tic), clear, infocmp, infotocap (link to tic),
- ncursesw5-config, reset (link to tset), tabs, tic, toe, tput, and tset</seg>
+ ncursesw5-config, reset (link to tset), tabs, tic, toe, tput, tset</seg>
<seg>libcursesw.so (link to libncursesw.so), libformw.[a,so],
- libmenuw.[a,so], libncurses++w.a, libncursesw.[a,so], and
+ libmenuw.[a,so], libncurses++w.a, libncursesw.[a,so],
libpanelw.[a,so]</seg>
<seg>/usr/share/tabset, /usr/share/terminfo</seg>
</seglistitem>
@@ -248,7 +264,7 @@
<listitem>
<para>Contains functions to implement forms</para>
<indexterm zone="ch-system-ncurses libformw">
- <primary sortas="c-libform">libformw</primary>
+ <primary sortas="c-libformw">libformw</primary>
</indexterm>
</listitem>
</varlistentry>
diff -ru /home/jp/a/BOOK/final-system/common/perl.xml BOOK/final-system/common/perl.xml
--- /home/jp/a/BOOK/final-system/common/perl.xml 2014-05-11 16:24:52.646516678 +0200
+++ BOOK/final-system/common/perl.xml 2014-10-03 20:44:43.916339261 +0200
/trunk/clfs/cross-tools/64/gcc-static.xml
22,7 → 22,11
<sect2 role="installation">
<title>Installation du compilateur croisé GCC avec libgcc statique et sans Threads</title>
 
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="../common/gcc-static.xml"
xpointer="xpointer(//*[@os='e'])"/>
 
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="../../final-system/common/gcc.xml"
xpointer="xpointer(//*[@os='p1'])"/>
 
/trunk/clfs/cross-tools/common/binutils.xml
48,9 → 48,9
xpointer="xpointer(//*[@os='i'])"/>
 
<screen os="bc"><userinput>AR=ar AS=as ../binutils-&binutils-dir;/configure \
--prefix=/cross-tools --host=${CLFS_HOST} --target=${CLFS_TARGET} \
--with-sysroot=${CLFS} --with-lib-path=/tools/lib --disable-nls \
--disable-static --enable-64-bit-bfd --disable-multilib</userinput></screen>
--prefix=/cross-tools --host=${CLFS_HOST} --target=${CLFS_TARGET} \
--with-sysroot=${CLFS} --with-lib-path=/tools/lib --disable-nls \
--disable-static --disable-multilib --disable-werror</userinput></screen>
 
<variablelist os="bd">
<title>Voici la signification des nouvelles options de configure&nbsp;:</title>
68,7 → 68,8
<varlistentry os="bd2">
<term><parameter>--host=${CLFS_HOST}</parameter></term>
<listitem>
<para>Lors d'une utilisation avec --target, ceci crée un exécutable pour une architecture croisée qui crée des fichiers pour
<para>Lors d'une utilisation avec <option>--target</option>, ceci crée
un exécutable pour une architecture croisée qui crée des fichiers pour
${CLFS_TARGET} mais s'exécute sur ${CLFS_HOST}.</para>
</listitem>
</varlistentry>
76,12 → 77,20
<varlistentry os="bd3">
<term><parameter>--target=${CLFS_TARGET}</parameter></term>
<listitem>
<para>Lors d'une utilisation avec --host, ceci crée un exécutable pour une architecture croisée qui crée des fichiers pour
<para>Lors d'une utilisation avec <option>--host</option>, ceci crée un exécutable pour une architecture croisée qui crée des fichiers pour
${CLFS_TARGET} mais se lance sur ${CLFS_HOST}.</para>
</listitem>
</varlistentry>
 
<varlistentry os="bd4">
<varlistentry os="bd4">
<term><parameter>--with-sysroot=${CLFS}</parameter></term>
<listitem>
<para>Dit à configure de construire un éditeur de lien qui utilise
${CLFS} comme répertoire racine de ses chemins de recherche.</para>
</listitem>
</varlistentry>
 
<varlistentry os="bd5">
<term><parameter>--with-lib-path=/tools/lib</parameter></term>
<listitem>
<para>Ceci dit au script configure de spécifier le chemin de recherche de la bibliothèque pendant la compilation de Binutils, le
90,7 → 99,7
</listitem>
</varlistentry>
 
<varlistentry os="bd5">
<varlistentry os="bd6">
<term><parameter>--disable-nls</parameter></term>
<listitem>
<para>Ceci désactive l'internationalisation car i18n n'est pas nécessaire pour les outils de compilation
98,7 → 107,7
</listitem>
</varlistentry>
 
<varlistentry os="bd6">
<varlistentry os="bd7">
<term><parameter>--disable-multilib</parameter></term>
<listitem>
<para>Cette option désactive la construction d'un Binutils supportant le Multilib.</para>
105,11 → 114,11
</listitem>
</varlistentry>
 
<varlistentry os="bd7">
<term><parameter>--enable-64-bit-bfd</parameter></term>
<varlistentry os="bd8">
<term><parameter>--disable-werror</parameter></term>
<listitem>
<para>Ceci ajoute le support pour 64 bit à Binutils.</para>
<para>Ceci empêche la construction de s'arrêter s'il y a des avertissements
du compilateur de l'hôte.</para>
</listitem>
</varlistentry>
 
117,30 → 126,12
 
<para os="be">Compilez le paquet&nbsp;:</para>
 
<screen os="bf"><userinput>make configure-host
make</userinput></screen>
<screen os="bf"><userinput>make</userinput></screen>
 
<variablelist os="bg">
<title>Voici la signification des options de make&nbsp;:</title>
 
<varlistentry os="bg1">
<term><parameter>configure-host</parameter></term>
<listitem>
<para>Ceci vérifie l'environnement hôte et s'assure que tous les outils nécessaires sont disponibles pour compiler Binutils.</para>
</listitem>
</varlistentry>
 
</variablelist>
 
<para os="bh">Installez le paquet&nbsp;:</para>
 
<screen os="bi"><userinput>make install</userinput></screen>
 
<para os="bj">Copiez <filename class="headerfile">libiberty.h</filename> vers le répertoire
<filename class="directory">/tools/include</filename>&nbsp;:</para>
 
<screen os="bk"><userinput>cp -v ../binutils-&binutils-dir;/include/libiberty.h /tools/include</userinput></screen>
 
</sect2>
 
<sect2 role="content">