Subversion Repositories svn LFS-FR

Compare Revisions

Ignore whitespace Rev 7045 → Rev 7046

/trunk/blfs/traduc/commits/r16901.txt
0,0 → 1,69
Révision 16901
 
fichiers modifiés :
general.ent
packages.ent
general/genlib/liblinear.xml
introduction/welcome/changelog.xml
postlfs/security/nss.xml
 
Log :
• nss-3.22 minor reformat. • liblinear-2.1 URL Forbidden: replaced by new unfriendly URL. Notice that versioning is changed from 2.1 to 210. Contents of old and new tarballs are exactly the same, but the directory changes from liblinear-2.1 to liblinear-210.
 
Le robot a traité 49 % du commit anglais
Index: general/genlib/liblinear.xml
===================================================================
--- general/genlib/liblinear.xml (révision 16900)
+++ general/genlib/liblinear.xml (révision 16901)
@@ -4,9 +4,13 @@
<!ENTITY % general-entities SYSTEM "../../general.ent">
%general-entities;
+<!--
<!ENTITY liblinear-download-http "http://www.csie.ntu.edu.tw/~cjlin/liblinear/oldfiles/liblinear-&liblinear-version;.tar.gz">
+ HTTP request sent, awaiting response... 403 Forbidden
+ 2016-02-04 09:39:51 ERROR 403: Forbidden. -->
<!ENTITY liblinear-download-ftp " ">
<!ENTITY liblinear-size "376 KB">
<!ENTITY liblinear-buildsize "1.2 MB">
@@ -82,6 +86,17 @@
</listitem>
</itemizedlist>
+ <note>
+ <para>
+ <application>liblinear</application> source tarball shown above
+ downloads with the correct name liblinear-&liblinear-version;.tar.gz, if
+ using a browser such as Firefox. If you prefer to use a command line
+ program, such as wget, you obtain v&liblinear-version;.tar.gz. To change
+ the filename, run: <command>mv -vi v&liblinear-version;.tar.gz
+ liblinear-&liblinear-version;.tar.gz</command>.
+ </para>
+ </note>
<para condition="html" role="usernotes">
User Notes: <ulink url="&blfs-wiki;/liblinear"/>
</para>
 
Index: introduction/welcome/changelog.xml
===================================================================
--- introduction/welcome/changelog.xml (révision 16900)
+++ introduction/welcome/changelog.xml (révision 16901)
@@ -45,6 +45,18 @@
-->
<listitem>
+ <para>February 4th, 2016</para>
+ <itemizedlist>
+ <listitem>
+ <para>[fernando] - liblinear-2.1 URL Forbidden: replaced by new
+ unfriendly URL. Notice that versioning is changed from 2.1 to 210.
+ Contents of old and new tarballs are exactly the same, but the
+ directory changes from liblinear-2.1 to liblinear-210.</para>
+ </listitem>
+ </itemizedlist>
+ </listitem>
+ <listitem>
<para>February 3rd, 2016</para>
<itemizedlist>
<listitem>
 
/trunk/blfs/traduc/commits/r16902.txt
0,0 → 1,101
Révision 16902
 
fichiers modifiés :
introduction/welcome/changelog.xml
postlfs/security/gnutls.xml
packages.ent
general/prog/mercurial.xml
general/prog/perl-modules.xml
general/prog/php.xml
 
Log :
• Update to php-7.0.3. • Update to gnutls-3.4.9. • Update to Regexp-Common-2016020301 (perl module). • Update to mercurial-3.7.1.
 
Le robot a traité 51 % du commit anglais
Index: general/prog/mercurial.xml
===================================================================
--- general/prog/mercurial.xml (révision 16901)
+++ general/prog/mercurial.xml (révision 16902)
@@ -127,17 +127,18 @@
<screen><userinput>pushd tests &amp;&amp;
rm -rf tmp &amp;&amp;
-./run-tests.py --debug --tmpdir tmp \
+ ./run-tests.py --tmpdir tmp \
test-convert-svn-source.t \
test-convert-hg-svn.t \
test-gpg.t &amp;&amp;
popd</userinput></screen>
-<para>Normally, the previous failures will be confirmed. However, if you add
-the switch "--debug" before "--tmpdir", and run again, some failures are
-gone, which seems to be a problem with the test suite. If this happens,
-normally, from now on, there will be no more such failures whether you use
-the debug switch or not.</para>
+ <para>Normally, the previous failures will be confirmed, except for
+ "test-gpg.t" which now pass (this is weird!). However, if you add the switch
+ "--debug" before "--tmpdir", and run again, some failures are gone, which
+ seems to be a problem with the test suite. If this happens, normally, from
+ now on, there will be no more such failures whether you use the debug switch
+ or not.</para>
<para>An interesting switch is "--time", which will generated at the end of
the test suite execution, a table with all executed tests and respective
 
Index: general/prog/php.xml
===================================================================
--- general/prog/php.xml (révision 16901)
+++ general/prog/php.xml (révision 16902)
@@ -126,7 +126,7 @@
<xref linkend="curl"/>,
<xref linkend="tidy-html"/>,
<ulink url="http://sourceforge.net/projects/caudium/">Caudium</ulink>,
-<ulink url="http://www.hyperwave.com/">Hyperwave</ulink>,
+ <ulink url="https://www.hyperwave.com/en/">Hyperwave</ulink>,
<ulink url="http://www.mnogosearch.org/">mnoGoSearch</ulink>,
<ulink url="http://www.roxen.com/products/webserver/">Roxen WebServer</ulink>, and
<ulink url="https://wddxnet.codeplex.com/">WDDX</ulink>
 
Index: introduction/welcome/changelog.xml
===================================================================
--- introduction/welcome/changelog.xml (révision 16901)
+++ introduction/welcome/changelog.xml (révision 16902)
@@ -48,6 +48,22 @@
<para>February 4th, 2016</para>
<itemizedlist>
<listitem>
+ <para>[fernando] - Update to mercurial-3.7.1. Fixes
+ <ulink url="&blfs-ticket-root;7426 ">#7426 </ulink>.</para>
+ </listitem>
+ <listitem>
+ <para>[fernando] - Update to Regexp-Common-2016020301 (perl module).
+ Fixes <ulink url="&blfs-ticket-root;7425 ">#7425 </ulink>.</para>
+ </listitem>
+ <listitem>
+ <para>[fernando] - Update to gnutls-3.4.9. Fixes
+ <ulink url="&blfs-ticket-root;7424 ">#7424 </ulink>.</para>
+ </listitem>
+ <listitem>
+ <para>[fernando] - Update to php-7.0.3. Fixes
+ <ulink url="&blfs-ticket-root;7421 ">#7421 </ulink>.</para>
+ </listitem>
+ <listitem>
<para>[fernando] - liblinear-2.1 URL Forbidden: replaced by new
unfriendly URL. Notice that versioning is changed from 2.1 to 210.
Contents of old and new tarballs are exactly the same, but the
 
Index: postlfs/security/gnutls.xml
===================================================================
--- postlfs/security/gnutls.xml (révision 16901)
+++ postlfs/security/gnutls.xml (révision 16902)
@@ -112,7 +112,8 @@
<xref linkend="texlive"/> or <xref linkend="tl-installer"/>,
<xref linkend="unbound"/> (to build the DANE library),
<xref linkend="valgrind"/> (used during the test suite),
-<ulink url="http://ftp.gnu.org/gnu/autogen/">autogen</ulink>, and
+ <ulink url="http://ftp.gnu.org/gnu/autogen/">autogen</ulink>,
+ <ulink url="http://ftp.debian.org/debian/pool/main/d/datefudge/">datefudge</ulink> (used during the test suite), and
<ulink url="http://sourceforge.net/projects/trousers/files/trousers/">Trousers</ulink> (Trusted Platform Module support)
</para>
 
/trunk/blfs/traduc/commits/r16903.txt
0,0 → 1,6
Révision 16903
 
Log :
 
 
Le robot a traité 0 % du commit anglais
/trunk/blfs/traduc/commits/r16904.txt
0,0 → 1,6
Révision 16904
 
Log :
 
 
Le robot a traité 0 % du commit anglais
/trunk/blfs/traduc/commits/r16905.txt
0,0 → 1,77
Révision 16905
 
fichiers modifiés :
general.ent
packages.ent
xsoft/other/feh.xml
x/installing/libinput.xml
general/sysutils/unrar.xml
introduction/welcome/changelog.xml
 
Log :
• Update to unrarsrc-5.3.10 (unrar-5.3.10). • Update to libinput-1.1.6. • Update to feh-2.14.1.
 
Le robot a traité 60 % du commit anglais
Index: introduction/welcome/changelog.xml
===================================================================
--- introduction/welcome/changelog.xml (révision 16904)
+++ introduction/welcome/changelog.xml (révision 16905)
@@ -45,6 +45,24 @@
-->
<listitem>
+ <para>February 5th, 2016</para>
+ <itemizedlist>
+ <listitem>
+ <para>[fernando] - Update to feh-2.14.1. Fixes
+ <ulink url="&blfs-ticket-root;7431 ">#7431 </ulink>.</para>
+ </listitem>
+ <listitem>
+ <para>[fernando] - Update to libinput-1.1.6. Fixes
+ <ulink url="&blfs-ticket-root;7430 ">#7430 </ulink>.</para>
+ </listitem>
+ <listitem>
+ <para>[fernando] - Update to unrarsrc-5.3.10 (unrar-5.3.10). Fixes
+ <ulink url="&blfs-ticket-root;7429 ">#7429 </ulink>.</para>
+ </listitem>
+ </itemizedlist>
+ </listitem>
+ <listitem>
<para>February 4th, 2016</para>
<itemizedlist>
<listitem>
 
Index: xsoft/other/feh.xml
===================================================================
--- xsoft/other/feh.xml (révision 16904)
+++ xsoft/other/feh.xml (révision 16905)
@@ -85,6 +85,17 @@
</listitem>
</itemizedlist>
+ <bridgehead renderas="sect3">Additional Downloads</bridgehead>
+ <itemizedlist spacing="compact">
+ <listitem>
+ <para>
+ Optional patch, for the test suite:
+ <ulink
+ url="&patch-root;/feh-&feh-version;-disable_some_tests-1.patch"/>
+ </para>
+ </listitem>
+ </itemizedlist>
<bridgehead renderas="sect3">feh Dependencies</bridgehead>
<bridgehead renderas="sect4">Required</bridgehead>
@@ -124,6 +135,13 @@
<sect2 role="installation">
<title>Installation of feh</title>
+ <para> Due to well-known problems when <application>feh</application> try to
+ load gif images (sometimes <application>imlib2</application> being blamed
+ for that), some tests fail. To avoid that, apply the following patch, if you
+ intend to run the test suite: </para>
+<screen><userinput>patch -Np1 -i ../feh-&feh-version;-disable_some_tests-1.patch</userinput></screen>
<para>
Install <application>feh</application> by running the following commands:
</para>
 
/trunk/blfs/traduc/commits/r16906.txt
0,0 → 1,6
Révision 16906
 
Log :
 
 
Le robot a traité 0 % du commit anglais
/trunk/blfs/traduc/commits/r16907.txt
0,0 → 1,6
Révision 16907
 
Log :
 
 
Le robot a traité 0 % du commit anglais
/trunk/blfs/traduc/commits/r16908.txt
0,0 → 1,50
Révision 16908
 
fichiers modifiés :
general.ent
general/genlib/liblinear.xml
general/genutils/tidy.xml
 
Log :
• tidy-html5-5.1.25 and liblinear-210: Fix "note" about downloading with correct filename.
 
Le robot a traité 36 % du commit anglais
Index: general/genlib/liblinear.xml
===================================================================
--- general/genlib/liblinear.xml (révision 16907)
+++ general/genlib/liblinear.xml (révision 16908)
@@ -91,9 +91,12 @@
<application>liblinear</application> source tarball shown above
downloads with the correct name liblinear-&liblinear-version;.tar.gz, if
using a browser such as Firefox. If you prefer to use a command line
-program, such as wget, you obtain v&liblinear-version;.tar.gz. To change
-the filename, run: <command>mv -vi v&liblinear-version;.tar.gz
-liblinear-&liblinear-version;.tar.gz</command>.
+ program such as wget, you normally would obtain
+ v&liblinear-version;.tar.gz. To obtain this package with the proper
+ filename, run:
+<screen><userinput>wget -c https://github.com/cjlin1/liblinear/archive/v&liblinear-version;.tar.gz \
+ -O liblinear-&liblinear-version;.tar.gz</userinput></screen>.
</para>
</note>
 
Index: general/genutils/tidy.xml
===================================================================
--- general/genutils/tidy.xml (révision 16907)
+++ general/genutils/tidy.xml (révision 16908)
@@ -64,9 +64,11 @@
<application>Tidy HTML5</application> source tarball shown above
downloads with the correct name tidy-html5-&tidy-version;.tar.gz, if
using a browser such as Firefox. If you prefer to use a command line
-program, such as wget, you obtain &tidy-version;.tar.gz. To
-change the filename, run: <command>mv -vi
-&tidy-version;.tar.gz tidy-html5-&tidy-version;.tar.gz</command>.
+ program such as wget, you normally would obtain &tidy-version;.tar.gz.
+ To obtain this package with the proper filename, run:
+<screen><userinput>wget -c https://github.com/htacg/tidy-html5/archive/&tidy-version;.tar.gz \
+ -O tidy-html5-&tidy-version;.tar.gz</userinput></screen>.
</para>
</note>
 
/trunk/blfs/traduc/commits/r16909.txt
0,0 → 1,42
Révision 16909
 
fichiers modifiés :
general/genutils/tidy.xml
general/genlib/liblinear.xml
 
Log :
Minor grammar fixes
 
Le robot a traité 18 % du commit anglais
Index: general/genlib/liblinear.xml
===================================================================
--- general/genlib/liblinear.xml (révision 16908)
+++ general/genlib/liblinear.xml (révision 16909)
@@ -88,8 +88,8 @@
<note>
<para>
-<application>liblinear</application> source tarball shown above
-downloads with the correct name liblinear-&liblinear-version;.tar.gz, if
+ The <application>liblinear</application> source tarball shown above
+ downloads with the correct namei, liblinear-&liblinear-version;.tar.gz, if
using a browser such as Firefox. If you prefer to use a command line
program such as wget, you normally would obtain
v&liblinear-version;.tar.gz. To obtain this package with the proper
 
Index: general/genutils/tidy.xml
===================================================================
--- general/genutils/tidy.xml (révision 16908)
+++ general/genutils/tidy.xml (révision 16909)
@@ -61,14 +61,14 @@
<note>
<para>
-<application>Tidy HTML5</application> source tarball shown above
-downloads with the correct name tidy-html5-&tidy-version;.tar.gz, if
+ The <application>Tidy HTML5</application> source tarball shown above
+ downloads with the correct name, tidy-html5-&tidy-version;.tar.gz, if
using a browser such as Firefox. If you prefer to use a command line
program such as wget, you normally would obtain &tidy-version;.tar.gz.
To obtain this package with the proper filename, run:
 
/trunk/blfs/traduc/commits/r16910.txt
0,0 → 1,46
Révision 16910
 
fichiers modifiés :
x/lib/clutter.xml
introduction/welcome/changelog.xml
 
Log :
Clutter uses libinput, not libevdev
 
Le robot a traité 2 % du commit anglais
Index: introduction/welcome/changelog.xml
===================================================================
--- introduction/welcome/changelog.xml (révision 16909)
+++ introduction/welcome/changelog.xml (révision 16910)
@@ -45,6 +45,16 @@
-->
<listitem>
+ <para>February 6th, 2016</para>
+ <itemizedlist>
+ <listitem>
+ <para>[Chris] - Updated dependencies for clutter - it uses libinput,
+ not libevdev.</para>
+ </listitem>
+ </itemizedlist>
+ </listitem>
+ <listitem>
<para>February 5th, 2016</para>
<itemizedlist>
<listitem>
 
Index: x/lib/clutter.xml
===================================================================
--- x/lib/clutter.xml (révision 16909)
+++ x/lib/clutter.xml (révision 16910)
@@ -99,8 +99,8 @@
<bridgehead renderas="sect4">Optional</bridgehead>
<para role="optional">
<xref linkend="gtk-doc"/>,
-<xref linkend="libevdev"/>,
<xref linkend="libgudev"/>,
+ <xref linkend="libinput"/>,
<xref linkend="libxkbcommon"/>,
<ulink url="https://github.com/kergoth/tslib">Tslib</ulink>, and
<ulink url="http://wayland.freedesktop.org/">Wayland</ulink>
 
/trunk/blfs/traduc/commits/r16911.txt
0,0 → 1,23
Révision 16911
 
fichiers modifiés :
general/prog/expect.xml
 
Log :
Spelling fix
 
Le robot a traité 0 % du commit anglais
Index: general/prog/expect.xml
===================================================================
--- general/prog/expect.xml (révision 16910)
+++ general/prog/expect.xml (révision 16911)
@@ -31,7 +31,7 @@
<para>The <application>Expect</application> package was installed in the
LFS temporary tools directory for testing other packages. These
-procedures install it in a prmanent location. It contains tools for
+ procedures install it in a permanent location. It contains tools for
automating interactive applications such as <command>telnet</command>,
<command>ftp</command>, <command>passwd</command>,
<command>fsck</command>, <command>rlogin</command>,
 
/trunk/blfs/traduc/commits/r16912.txt
0,0 → 1,198
Révision 16912
 
fichiers modifiés :
packages.ent
gnome/platform/libwnck.xml
pst/printing/cups.xml
server/other/openldap.xml
general/genlib/liblinear.xml
introduction/welcome/changelog.xml
multimedia/libdriv/v4l-utils.xml
multimedia/videoutils/vlc.xml
gnome.ent
 
Log :
• liblinear-210: typo and minor "gqap". • Update to openldap-2.4.44. • Update to libwnck-3.14.1. • Update to cups-2.1.3. • v4l-utils-1.10.0: typo. • Update to vlc-2.2.2.
 
Le robot a traité 43 % du commit anglais
Index: general/genlib/liblinear.xml
===================================================================
--- general/genlib/liblinear.xml (révision 16911)
+++ general/genlib/liblinear.xml (révision 16912)
@@ -89,8 +89,8 @@
<note>
<para>
The <application>liblinear</application> source tarball shown above
-downloads with the correct namei, liblinear-&liblinear-version;.tar.gz, if
-using a browser such as Firefox. If you prefer to use a command line
+ downloads with the correct name, liblinear-&liblinear-version;.tar.gz,
+ if using a browser such as Firefox. If you prefer to use a command line
program such as wget, you normally would obtain
v&liblinear-version;.tar.gz. To obtain this package with the proper
filename, run:
 
Index: introduction/welcome/changelog.xml
===================================================================
--- introduction/welcome/changelog.xml (révision 16911)
+++ introduction/welcome/changelog.xml (révision 16912)
@@ -48,6 +48,22 @@
<para>February 6th, 2016</para>
<itemizedlist>
<listitem>
+ <para>[fernando] - Update to vlc-2.2.2. Fixes
+ <ulink url="&blfs-ticket-root;7437 ">#7437 </ulink>.</para>
+ </listitem>
+ <listitem>
+ <para>[fernando] - Update to cups-2.1.3. Fixes
+ <ulink url="&blfs-ticket-root;7436 ">#7436 </ulink>.</para>
+ </listitem>
+ <listitem>
+ <para>[fernando] - Update to libwnck-3.14.1. Fixes
+ <ulink url="&blfs-ticket-root;7435 ">#7435 </ulink>.</para>
+ </listitem>
+ <listitem>
+ <para>[fernando] - Update to openldap-2.4.44. Fixes
+ <ulink url="&blfs-ticket-root;7434 ">#7434 </ulink>.</para>
+ </listitem>
+ <listitem>
<para>[Chris] - Updated dependencies for clutter - it uses libinput,
not libevdev.</para>
</listitem>
 
Index: multimedia/libdriv/v4l-utils.xml
===================================================================
--- multimedia/libdriv/v4l-utils.xml (révision 16911)
+++ multimedia/libdriv/v4l-utils.xml (révision 16912)
@@ -121,8 +121,8 @@
make</userinput></screen>
<para>
-Again, if both Qt4 and 5 installed at /opt and you chose to build against
-Qt4, restore <envar>PKG_CONFIG_PATH</envar>:
+ Again, if both Qt4 and 5 are installed and you chose to build against Qt4,
+ restore <envar>PKG_CONFIG_PATH</envar>:
</para>
<screen><userinput>PKG_CONFIG_PATH=$SAVEPATH &amp;&amp;
 
Index: multimedia/videoutils/vlc.xml
===================================================================
--- multimedia/videoutils/vlc.xml (révision 16911)
+++ multimedia/videoutils/vlc.xml (révision 16912)
@@ -106,7 +106,7 @@
<ulink url="http://www.videolan.org/developers/libbluray.html">libbluray</ulink>,
<ulink url="http://sourceforge.net/projects/libdc1394/">libdc1394</ulink>,
<ulink url="http://sourceforge.net/projects/libcddb/">libcddb</ulink>,
-<ulink url="http://code.google.com/p/libproxy/">libproxy</ulink>,
+ <ulink url="https://github.com/libproxy/libproxy">libproxy</ulink>,
<ulink url="http://www.live555.com/">Live555</ulink>, and
<ulink url="http://www.gnu.org/software/vcdimager/">VCDImager</ulink>
(requires <xref linkend="libcdio"/>)
@@ -115,14 +115,14 @@
<bridgehead renderas="sect4">Optional mux/demux plugins</bridgehead>
<para role="optional">
<xref linkend="libogg"/>,
-<ulink url="http://code.google.com/p/game-music-emu/">Game Music Emu</ulink>,
+ <ulink url="https://github.com/kode54/Game_Music_Emu">Game Music Emu</ulink>,
<ulink url="http://www.videolan.org/developers/libdvbpsi.html">libdvbpsi</ulink>,
<ulink url="http://downloads.xiph.org/releases/libshout/">libshout</ulink>,
<ulink url="http://dl.matroska.org/downloads/libmatroska/">libmatroska</ulink>
@@ -138,13 +138,13 @@
<xref linkend="opus"/>,
<xref linkend="speex"/>,
<xref linkend="x264"/>,
-<ulink url="http://diracvideo.org/download/dirac-research/">Dirac</ulink>,
+ <ulink url="http://sourceforge.net/projects/dirac/">Dirac</ulink>,
<ulink url="http://sourceforge.net/projects/fluidsynth/">FluidSynth</ulink>,
<ulink url="http://www.videolan.org/developers/libdca.html">libdca</ulink>,
<ulink url="http://code.google.com/p/libkate/">libkate</ulink>,
-<ulink url="http://code.google.com/p/libtiger/">libtiger</ulink>,
+ <!--<ulink url="http://code.google.com/p/libtiger/">libtiger</ulink>,-->
<ulink url="http://www.khronos.org/openmax/">OpenMAX</ulink>,
-<ulink url="http://diracvideo.org/download/schroedinger/">Schroedinger</ulink>,
+ <ulink url="http://sourceforge.net/projects/schrodinger/">Schroedinger</ulink>,
<ulink url="http://wiki.xiph.org/Tremor">Tremor</ulink>,
<ulink url="http://www.twolame.org/">Twolame</ulink>, and
<ulink url="http://sourceforge.net/projects/zapping/">Zapping VBI</ulink>
@@ -173,7 +173,8 @@
<bridgehead renderas="sect4">Optional interface plugins</bridgehead>
<para role="optional">
<xref linkend="qt4"/> (required for the graphical user interface),
-<xref linkend="qt5"/> (for some plugins),
+ <xref linkend="qt5"/> (for some plugins, but currently broken with
+ Qt-5.5),
<ulink url="http://pkgbuild.com/~giovanni/libtar/">libtar</ulink>, and
<ulink url="http://www.lirc.org/">LIRC</ulink>
<!--<ulink url="http://www.feep.net/libtar/">libtar</ulink>-->
@@ -210,6 +211,15 @@
<title>Installation of VLC</title>
<para>
+ If both Qt4 and Qt5 are installed, Qt5 has to be hidden from
+ <envar>PKG_CONFIG_PATH</envar>, due to a bug. Temporarily do it, issuing:
+ </para>
+<screen><userinput>SAVEPATH=$PKG_CONFIG_PATH &amp;&amp;
+PKG_CONFIG_PATH="\
+`echo $PKG_CONFIG_PATH | sed 's@:/opt/qt5/lib/pkgconfig@@'`"</userinput></screen>
+ <para>
Install <application>VLC</application> by running the following commands:
</para>
@@ -236,11 +246,19 @@
make</userinput></screen>
<para>
-To test the results, issue: <command>make check</command>. Tests must be
-run from an active X session.
+ Again, if both Qt4 and 5 are installed, restore
+ <envar>PKG_CONFIG_PATH</envar>:
</para>
+<screen><userinput>PKG_CONFIG_PATH=$SAVEPATH &amp;&amp;
+unset SAVEPATH</userinput></screen>
<para>
+ To test the results, issue: <command>make -k check</command>. Tests must be
+ run from an active X session. One test fails for unknown reasons.
+ </para>
+ <para>
Now, as the <systemitem class="username">root</systemitem> user:
</para>
@@ -381,9 +399,7 @@
/usr/lib/vlc/plugins
</seg>
<seg>
-/usr/include/vlc,
-/usr/lib/vlc,
-/usr/share/vlc and
+ /usr/{include,lib,share}/vlc and
/usr/share/doc/vlc-&vlc-version;
</seg>
</seglistitem>
 
Index: pst/printing/cups.xml
===================================================================
--- pst/printing/cups.xml (révision 16911)
+++ pst/printing/cups.xml (révision 16912)
@@ -222,6 +222,7 @@
aclocal -I config-scripts &amp;&amp;
autoconf -I config-scripts &amp;&amp;
+CC=gcc \
./configure --libdir=/usr/lib \
--disable-systemd \
--with-rcdir=/tmp/cupsinit \
@@ -278,6 +279,13 @@
<application>libgcrypt</application> is not used anywere else in the
package.
</para>
+ <para>
+ <envar>CC=gcc</envar>: This environment variable ensures that gcc is used,
+ if clang is installed. Remove it, if you prefer to use clang. Using clang
+ almost doubles build time and slightly decreases build disk space.
+ Installed disk space is not appreciably modified.
+ </para>
<!--
<para>
<command>sed ... test/ippserver.c</command>: This sed fixes a bug,
 
/trunk/blfs/traduc/commits/r16913.txt
0,0 → 1,6
Révision 16913
 
Log :
 
 
Le robot a traité 0 % du commit anglais
/trunk/blfs/traduc/commits/r16914.txt
0,0 → 1,6
Révision 16914
 
Log :
 
 
Le robot a traité 0 % du commit anglais
/trunk/blfs/traduc/commits/r16915.txt
0,0 → 1,6
Révision 16915
 
Log :
 
 
Le robot a traité 0 % du commit anglais
/trunk/blfs/traduc/commits/r16916.txt
0,0 → 1,23
Révision 16916
 
fichiers modifiés :
postlfs/security/linux-pam.xml
 
Log :
Minor grammar fix in Linux-PAM.
 
Le robot a traité 0 % du commit anglais
Index: postlfs/security/linux-pam.xml
===================================================================
--- postlfs/security/linux-pam.xml (révision 16915)
+++ postlfs/security/linux-pam.xml (révision 16916)
@@ -164,7 +164,7 @@
overwrites the configuration files in
<filename class="directory">/etc/security</filename> as well as
<filename>/etc/environment</filename>. In case you
-have modified those files, be sure to backup them.
+ have modified those files, be sure to back them up.
</para>
</caution>
 
/trunk/blfs/traduc/commits/r16917.txt
0,0 → 1,6
Révision 16917
 
Log :
 
 
Le robot a traité 0 % du commit anglais
/trunk/blfs/traduc/commits/r16918.txt
0,0 → 1,6
Révision 16918
 
Log :
 
 
Le robot a traité 0 % du commit anglais