Subversion Repositories svn LFS-FR

Compare Revisions

Ignore whitespace Rev 12 → Rev 13

/trunk/lfs/appendixa/gettext.xml
1,10 → 1,10
<sect1 id="aa-gettext">
<title>Gettext</title>
<?dbhtml filename="gettext.html" dir="appendixa"?>
 
&aa-gettext-down;
&aa-gettext-desc;
&aa-gettext-dep;
 
</sect1>
 
<sect1 id="aa-gettext">
<title>Gettext</title>
<?dbhtml filename="gettext.html" dir="appendixa"?>
 
&aa-gettext-down;
&aa-gettext-desc;
&aa-gettext-dep;
 
</sect1>
 
/trunk/lfs/appendixa/gzip-desc.xml
1,53 → 1,54
<sect2><title>Contents of gzip-&gzip-contversion;</title>
 
<sect3><title>Program Files</title>
<para>gunzip (link to gzip), gzexe, gzip,
uncompress (link to gunzip), zcat (link to gzip), zcmp, zdiff, zforce,
zgrep, zmore and znew</para></sect3>
 
<sect3><title>Description</title>
 
<sect4><title>gunzip, uncompress</title>
<para>gunzip and uncompress decompress files which are compressed with
gzip.</para></sect4>
 
<sect4><title>gzexe</title>
<para>gzexe allows you to compress executables in place and have them
automatically uncompress and execute when they are run (at a penalty in
performance).</para></sect4>
 
<sect4><title>gzip</title>
<para>gzip reduces the size of the named files using
Lempel-Ziv coding (LZ77).</para></sect4>
 
<sect4><title>zcat</title>
<para>zcat uncompresses either a list of files on the command line or its
standard input and writes the uncompressed data on
standard output</para></sect4>
 
<sect4><title>zcmp</title>
<para>zcmp invokes the cmp program on compressed files.</para></sect4>
 
<sect4><title>zdiff</title>
<para>zdiff invokes the diff program on compressed files.</para></sect4>
 
<sect4><title>zforce</title>
<para>zforce forces a .gz extension on all gzip files so that gzip will not
compress them twice. This can be useful for files with names truncated
after a file transfer.</para></sect4>
 
<sect4><title>zgrep</title>
<para>zgrep invokes the grep program on compressed files.</para></sect4>
 
<sect4><title>zmore</title>
<para>zmore is a filter which allows examination of compressed or plain text
files one screen at a time on a soft-copy terminal (similar to the
more program).</para></sect4>
 
<sect4><title>znew</title>
<para>znew re-compresses files from .Z (compress) format to
.gz (gzip) format.</para></sect4>
 
</sect3>
 
</sect2>
<sect2><title>Contenu de gzip-&gzip-contversion;</title>
 
<sect3><title>Programmes</title>
<para>gunzip (link to gzip), gzexe, gzip,
uncompress (link to gunzip), zcat (link to gzip), zcmp, zdiff, zforce,
zgrep, zmore et znew</para></sect3>
 
<sect3><title>Description</title>
 
<sect4><title>gunzip, uncompress</title>
<para>gunzip et uncompress décompressent les fichiers qui ont été compressés par
gzip.</para></sect4>
 
<sect4><title>gzexe</title>
<para>gzexe vous permet de compresser des exécutables et de les décompresser
puis de les lancer automatiquement (avec cependant une baisse des performances).
</para></sect4>
 
<sect4><title>gzip</title>
<para>gzip reduces the size of the named files using
Lempel-Ziv coding (LZ77).</para></sect4>
 
<sect4><title>zcat</title>
<para>zcat décompresse une liste de fichiers donnée en ligne de commande ou
utilise l'entrée standard en lecture et écrit les données décompressées sur
la sortie standard.</para></sect4>
 
<sect4><title>zcmp</title>
<para>zcmp a le même fonctionnement que le programme cmp mais sur des fichiers
compressés.</para></sect4>
 
<sect4><title>zdiff</title>
<para>zdiff a le même fonctionnement que le programme diff mais sur des fichiers
compressés.</para></sect4>
 
<sect4><title>zforce</title>
<para>zforce force l'extension .gz sur les fichiers compressés par gzip de façon à
ce que gzip ne les compresse pas une deuxième fois. Ceci peut être utile pour des
fichiers dont le nom a été tronqué après un transfert de fichier.</para></sect4>
 
<sect4><title>zgrep</title>
<para>zgrep a le même fonctionnement que le programme grep mais sur des fichiers
compressés.</para></sect4>
 
<sect4><title>zmore</title>
<para>zmore est un programme permettant d'avoir le comportement du programme more
aussi bien sur des fichiers normaux que compressés.</para></sect4>
 
<sect4><title>znew</title>
<para>znew convertit les fichiers de format .Z (compress) en .gz (gzip).</para></sect4>
 
</sect3>
 
</sect2>
/trunk/lfs/appendixa/glibc-down.xml
1,9 → 1,9
<sect2>
<title>Official Download Location</title>
 
<para><literallayout>Glibc (&glibc-version;):
<ulink url="ftp://ftp.gnu.org/gnu/glibc/">ftp://ftp.gnu.org/gnu/glibc/</ulink>
 
Glibc-linuxthreads (&glibc-version;):
<ulink url="ftp://ftp.gnu.org/gnu/glibc/">ftp://ftp.gnu.org/gnu/glibc/</ulink></literallayout></para>
</sect2>
<sect2>
<title>Site officiel de téléchargement</title>
 
<para><literallayout>Glibc (&glibc-version;):
<ulink url="ftp://ftp.gnu.org/gnu/glibc/">ftp://ftp.gnu.org/gnu/glibc/</ulink>
 
Glibc-linuxthreads (&glibc-version;):
<ulink url="ftp://ftp.gnu.org/gnu/glibc/">ftp://ftp.gnu.org/gnu/glibc/</ulink></literallayout></para>
</sect2>
/trunk/lfs/appendixa/kernel-dep.xml
1,24 → 1,24
<sect2>
<title>Dependencies</title>
 
<para>Linux-&kernel-depversion; needs the following to be installed:</para>
 
<literallayout>
bash: sh
binutils: ar, as, ld, nm, objcopy
fileutils: cp, ln, mkdir, mv, rm
findutils: find, xargs
gcc: cc1, collect2, cpp0, gcc
grep: grep
gzip: gzip
make: make
mawk: awk
modutils: depmod, genksyms
net-tools: dnsdomainname, hostname
sed: sed
sh-utils: basename, date, expr, pwd, stty, uname, whoami, yes
textutils: cat, md5sum, sort, tail, touch
</literallayout>
 
</sect2>
 
<sect2>
<title>Dépendances</title>
 
<para>Linux-&kernel-depversion; nécessite que les programmes suivants soient installés:</para>
 
<literallayout>
bash: sh
binutils: ar, as, ld, nm, objcopy
fileutils: cp, ln, mkdir, mv, rm
findutils: find, xargs
gcc: cc1, collect2, cpp0, gcc
grep: grep
gzip: gzip
make: make
mawk: awk
modutils: depmod, genksyms
net-tools: dnsdomainname, hostname
sed: sed
sh-utils: basename, date, expr, pwd, stty, uname, whoami, yes
textutils: cat, md5sum, sort, tail, touch
</literallayout>
 
</sect2>
 
/trunk/lfs/appendixa/kbd.xml
1,10 → 1,10
<sect1 id="aa-kbd">
<title>Kbd</title>
<?dbhtml filename="kbd.html" dir="appendixa"?>
 
&aa-kbd-down;
&aa-kbd-desc;
&aa-kbd-dep;
 
</sect1>
 
<sect1 id="aa-kbd">
<title>Kbd</title>
<?dbhtml filename="kbd.html" dir="appendixa"?>
 
&aa-kbd-down;
&aa-kbd-desc;
&aa-kbd-dep;
 
</sect1>
 
/trunk/lfs/appendixa/groff-dep.xml
1,22 → 1,22
<sect2>
<title>Dependencies</title>
 
<para>Groff-&groff-depversion; needs the following to be installed:</para>
 
<literallayout>
bash: sh
binutils: ar, as, ld, ranlib
bison: bison
diffutils: cmp
fileutils: chmod, cp, install, ln, ls, mkdir, mv, rm, touch
gcc: cc1, cc1plus, collect2, cpp0, g++, gcc
grep: egrep, grep
make: make
mawk: awk
sed: sed
sh-utils: basename, date, echo, expr, hostname, uname
textutils: cat, tr
</literallayout>
 
</sect2>
 
<sect2>
<title>Dépendances</title>
 
<para>Groff-&groff-depversion; nécessite que les programmes suivants soient installés:</para>
 
<literallayout>
bash: sh
binutils: ar, as, ld, ranlib
bison: bison
diffutils: cmp
fileutils: chmod, cp, install, ln, ls, mkdir, mv, rm, touch
gcc: cc1, cc1plus, collect2, cpp0, g++, gcc
grep: egrep, grep
make: make
mawk: awk
sed: sed
sh-utils: basename, date, echo, expr, hostname, uname
textutils: cat, tr
</literallayout>
 
</sect2>
 
/trunk/lfs/appendixa/less-down.xml
1,6 → 1,6
<sect2>
<title>Official Download Location</title>
 
<para><literallayout>Less (&less-version;):
<ulink url="ftp://ftp.gnu.org/gnu/less/">ftp://ftp.gnu.org/gnu/less/</ulink></literallayout></para>
</sect2>
<sect2>
<title>Site officiel de téléchargement</title>
 
<para><literallayout>Less (&less-version;):
<ulink url="ftp://ftp.gnu.org/gnu/less/">ftp://ftp.gnu.org/gnu/less/</ulink></literallayout></para>
</sect2>
/trunk/lfs/appendixa/kbd-desc.xml
1,101 → 1,103
<sect2><title>Contents of kbd-&kbd-contversion;</title>
 
<sect3><title>Program Files</title>
<para>chvt, deallocvt, dumpkeys, fgconsole,
getkeycodes, getunimap, kbd_mode, kbdrate, loadkeys, loadunimap,
mapscrn, openvt, psfaddtable (link to psfxtable), psfgettable (link to
psfxtable), psfstriptable (link to psfxtable), psfxtable, resizecons,
setfont, setkeycodes, setleds, setlogcons,
setmetamode, setvesablank, showfont, showkey, unicode_start, and
unicode_stop</para></sect3>
 
<sect3><title>Descriptions</title>
 
<sect4><title>chvt</title>
<para>chvt changes foreground virtual terminal.</para></sect4>
 
<sect4><title>deallocvt</title>
<para>deallocvt deallocates unused virtual terminals.</para></sect4>
 
<sect4><title>dumpkeys</title>
<para>dumpkeys dumps keyboard translation tables.</para></sect4>
 
<sect4><title>fgconsole</title>
<para>fgconsole prints the number of the active virtual terminal.</para></sect4>
 
<sect4><title>getkeycodes</title>
<para>getkeycodes prints the kernel scancode-to-keycode
mapping table.</para></sect4>
 
<sect4><title>getunimap</title>
<para>getunimap prints the currently used unimap.</para></sect4>
 
<sect4><title>kbd_mode</title>
<para>kbd_mode reports or sets the keyboard mode.</para></sect4>
 
<sect4><title>kbdrate</title>
<para>kbdrate sets the keyboard repeat and delay rates.</para></sect4>
 
<sect4><title>loadkeys</title>
<para>loadkeys loads keyboard translation tables.</para></sect4>
 
<sect4><title>loadunimap</title>
<para>loadunimap loads the kernel unicode-to-font mapping table.</para></sect4>
 
<sect4><title>mapscrn</title>
<para>mapscrn loads a user defined output character
mapping table into the console driver. Note that it is obsolete and that its
features are built into setfont.</para></sect4>
 
<sect4><title>openvt</title>
<para>openvt starts a program on a new virtual terminal (VT)</para></sect4>
 
<sect4><title>psfaddtable, psfgettable, psfstriptable, psfxtable</title>
<para>These are a set of tools for handling Unicode character tables for
console fonts.</para></sect4>
 
<sect4><title>resizecons</title>
<para>resizecons changes the kernel idea of the console size.</para></sect4>
 
<sect4><title>setfont</title>
<para>This lets you change the EGA/VGA fonts in console.</para></sect4>
 
<sect4><title>setkeycodes</title>
<para>setkeycodes loads kernel scancode-to-keycode mapping
table entries.</para></sect4>
 
<sect4><title>setleds</title>
<para>setleds sets the keyboard LEDs. Many people find it useful to have numlock
enabled by default, and it is by using this program that you can
achieve this.</para></sect4>
 
<sect4><title>setlogcons</title>
<para>setlogcons sends kernel messages to the console.</para></sect4>
 
<sect4><title>setmetamode</title>
<para>setmetamode defines the keyboard meta key handling.</para></sect4>
 
<sect4><title>setvesablank</title>
<para>This lets you fiddle with the built-in hardware screensaver
(not toasters, only a blank screen).</para></sect4>
 
<sect4><title>showfont</title>
<para>showfont displays data about a font. The information shown includes font
information, font properties, character metrics, and
character bitmaps.</para></sect4>
 
<sect4><title>showkey</title>
<para>showkey examines the scancodes and keycodes sent by
the keyboard.</para></sect4>
 
<sect4><title>unicode_start</title>
<para>unicode_start puts the console in Unicode mode.</para></sect4>
 
<sect4><title>unicode_stop</title>
<para>unicode_stop reverts keyboard and console from
unicode mode.</para></sect4>
 
</sect3>
 
</sect2>
 
<sect2><title>Contenu de kbd-&kbd-contversion;</title>
 
<sect3><title>Programmes</title>
<para>chvt, deallocvt, dumpkeys, fgconsole,
getkeycodes, getunimap, kbd_mode, kbdrate, loadkeys, loadunimap,
mapscrn, openvt, psfaddtable (link to psfxtable), psfgettable (link to
psfxtable), psfstriptable (link to psfxtable), psfxtable, resizecons,
setfont, setkeycodes, setleds, setlogcons,
setmetamode, setvesablank, showfont, showkey, unicode_start, et
unicode_stop</para></sect3>
 
<sect3><title>Descriptions</title>
 
<sect4><title>chvt</title>
<para>chvt change le terminal virtuel de premier plan.</para></sect4>
 
<sect4><title>deallocvt</title>
<para>deallocvt désalloue les terminaux virtuels inutilisés.</para></sect4>
 
<sect4><title>dumpkeys</title>
<para>dumpkeys affiche les tables de conversion du clavier.</para></sect4>
 
<sect4><title>fgconsole</title>
<para>fgconsole affiche le numéro du terminal virtuel actif.</para></sect4>
 
<sect4><title>getkeycodes</title>
<para>getkeycodes affiche la table de correspondance de scancode en keycode
du noyau.</para></sect4>
 
<sect4><title>getunimap</title>
<para>getunimap affiche le unimap actuellement utilisé.</para></sect4>
 
<sect4><title>kbd_mode</title>
<para>kbd_mode indique ou positionne le mode du clavier.</para></sect4>
 
<sect4><title>kbdrate</title>
<para>kbdrate positionne les taux de répétition et de temporisation
du clavier.</para></sect4>
 
<sect4><title>loadkeys</title>
<para>loadkeys charge les tables de conversion du clavier.</para></sect4>
 
<sect4><title>loadunimap</title>
<para>loadunimap charge la table de correspondance d'unicode en police du noyau.</para></sect4>
 
<sect4><title>mapscrn</title>
<para>mapscrn charge une table de correspondance des caractères de sortie
définie par l'utilisateur dans le pilote de la console. Notez qu'il est
obsolète et que ses fonctionnalités sont reprises dans setfont.</para></sect4>
 
<sect4><title>openvt</title>
<para>openvt lance un programme sur un nouveau terminal virtuel (VT).</para></sect4>
 
<sect4><title>psfaddtable, psfgettable, psfstriptable, psfxtable</title>
<para>C'est un ensemble d'outils pour gérer les tables de caractères Unicode pour
les polices de console.</para></sect4>
 
<sect4><title>resizecons</title>
<para>resizeicons modifie la représentation de la taille de la console pour le noyau.
</para></sect4>
 
<sect4><title>setfont</title>
<para>Ceci vous permet de modifier les polices EGA/VGA dans la console.</para></sect4>
 
<sect4><title>setkeycodes</title>
<para>setkeycodes charge les entrées de la table de correspondance scancode
en keycode du noyau.</para></sect4>
 
<sect4><title>setleds</title>
<para>setleds positionne les LED du clavier. Beaucoup de personnes trouvent
utile d'avoir numlock activé par défaut, et c'est en utilisant ce programme
que vous pourrez y arriver.</para></sect4>
 
<sect4><title>setlogcons</title>
<para>setlogcons sends kernel messages to the console.</para></sect4>
 
<sect4><title>setmetamode</title>
<para>setmetamode définit la gestion de la touche méta du clavier.</para></sect4>
 
<sect4><title>setvesablank</title>
<para>Ceci vous laisse trafiquer l'économiseur d'écran matériel
(pas de grilles-pain, seulement un écran vide).</para></sect4>
 
<sect4><title>showfont</title>
<para>showfont affiche des données sur une police. L'information montrée
comprend les informations sur la police, ses propriétés, les métriques des
caractères, et les images des caractères.</para></sect4>
 
<sect4><title>showkey</title>
<para>showkey examine les scancodes et les keycodes transmis par le clavier.
</para></sect4>
 
<sect4><title>unicode_start</title>
<para>unicode_start met la console en mode Unicode.</para></sect4>
 
<sect4><title>unicode_stop</title>
<para>unicode_stop annule le mode unicode pour le clavier et la console.
</para></sect4>
 
</sect3>
 
</sect2>
 
/trunk/lfs/appendixa/less-dep.xml
1,20 → 1,20
<sect2>
<title>Dependencies</title>
 
<para>Less-&less-depversion; needs the following to be installed:</para>
 
<literallayout>
bash: sh
binutils: as, ld
diffutils: cmp
fileutils: chmod, install, mv, rm, touch
grep: egrep, grep
gcc: cc1, collect2, cpp0, gcc
make: make
sed: sed
sh-utils: expr, hostname, uname
textutils: cat, tr
</literallayout>
 
</sect2>
 
<sect2>
<title>Dépendances</title>
 
<para>Less-&less-depversion; nécessite que les programmes suivants soient installés:</para>
 
<literallayout>
bash: sh
binutils: as, ld
diffutils: cmp
fileutils: chmod, install, mv, rm, touch
grep: egrep, grep
gcc: cc1, collect2, cpp0, gcc
make: make
sed: sed
sh-utils: expr, hostname, uname
textutils: cat, tr
</literallayout>
 
</sect2>
 
/trunk/lfs/appendixa/makedev.xml
1,10 → 1,10
<sect1 id="aa-makedev">
<title>MAKEDEV</title>
<?dbhtml filename="makedev.html" dir="appendixa"?>
 
&aa-makedev-down;
&aa-makedev-desc;
&aa-makedev-dep;
 
</sect1>
 
<sect1 id="aa-makedev">
<title>MAKEDEV</title>
<?dbhtml filename="makedev.html" dir="appendixa"?>
 
&aa-makedev-down;
&aa-makedev-desc;
&aa-makedev-dep;
 
</sect1>
 
/trunk/lfs/appendixa/libtool-desc.xml
1,30 → 1,31
<sect2><title>Contents of libtool-&libtool-contversion;</title>
 
<sect3><title>Program Files</title>
<para>libtool and libtoolize</para></sect3>
 
<sect3><title>Descriptions</title>
 
<sect4><title>libtool</title>
<para>Libtool provides generalized library-building
support services.</para></sect4>
 
<sect4><title>libtoolize</title>
<para>libtoolize provides a standard way to add libtool support to a
package.</para></sect4>
 
</sect3>
 
<sect3><title>Library Files</title>
<para>libltdl.[a,so]</para></sect3>
 
<sect3><title>Descriptions</title>
 
<sect4><title>libltdl</title>
<para>Libtool provides a small library, called `libltdl', that aims at hiding
the various difficulties of dlopening libraries from programmers.</para></sect4>
 
</sect3>
 
</sect2>
 
<sect2><title>Contenu de libtool-&libtool-contversion;</title>
 
<sect3><title>Programmes</title>
<para>libtool et libtoolize</para></sect3>
 
<sect3><title>Descriptions</title>
 
<sect4><title>libtool</title>
<para>libtool fournit des services généraux de support de construction
de bibliothèques.</para></sect4>
 
<sect4><title>libtoolize</title>
<para>libtoolize fournit un moyen standard d'ajouter un support libtool
à un package.</para></sect4>
 
</sect3>
 
<sect3><title>Bibliothèques</title>
<para>libltdl.[a,so]</para></sect3>
 
<sect3><title>Descriptions</title>
 
<sect4><title>libltdl</title>
<para>Libtool fournit une petite bibliothèque, appelée 'libltdl', qui a
pour but de masquer les différentes difficultés liées à l'ouverture
dynamique des bibliothèques aux programmeurs.</para></sect4>
 
</sect3>
 
</sect2>
 
/trunk/lfs/appendixa/m4.xml
1,10 → 1,10
<sect1 id="aa-m4">
<title>M4</title>
<?dbhtml filename="m4.html" dir="appendixa"?>
 
&aa-m4-down;
&aa-m4-desc;
&aa-m4-dep;
 
</sect1>
 
<sect1 id="aa-m4">
<title>M4</title>
<?dbhtml filename="m4.html" dir="appendixa"?>
 
&aa-m4-down;
&aa-m4-desc;
&aa-m4-dep;
 
</sect1>
 
/trunk/lfs/appendixa/gettext-down.xml
1,6 → 1,6
<sect2>
<title>Official Download Location</title>
 
<para><literallayout>Gettext (&gettext-version;):
<ulink url="ftp://ftp.gnu.org/gnu/gettext/">ftp://ftp.gnu.org/gnu/gettext/</ulink></literallayout></para>
</sect2>
<sect2>
<title>Site officiel de téléchargement</title>
 
<para><literallayout>Gettext (&gettext-version;):
<ulink url="ftp://ftp.gnu.org/gnu/gettext/">ftp://ftp.gnu.org/gnu/gettext/</ulink></literallayout></para>
</sect2>
/trunk/lfs/appendixa/m4-desc.xml
1,20 → 1,22
<sect2><title>Contents of m4-&m4-contversion;</title>
 
<sect3><title>Program Files</title>
<para>m4</para></sect3>
 
<sect3><title>Descriptions</title>
 
<sect4><title>m4</title>
<para>M4 is a macro processor. It copies input to output expanding macros as it
goes. Macros are either built-in or user-defined and can take any number
of arguments. Besides just doing macro expansion m4 has built-in functions
for including named files, running UNIX commands, doing integer arithmetic,
manipulating text in various ways, recursion, etc. M4 can be used either
as a front-end to a compiler or as a macro processor in its own
right.</para></sect4>
 
</sect3>
 
</sect2>
 
<sect2><title>Contenu de m4-&m4-contversion;</title>
 
<sect3><title>Programmes</title>
<para>m4</para></sect3>
 
<sect3><title>Descriptions</title>
 
<sect4><title>m4</title>
<para>M4 est un processeur de macro. Il copie l'entrée sur la sortie
en développant les macros au fur et à mesure. Les macros sont soit
prédéfinies, soit définies par l'utilisateur, et peuvent prendre un
nombre quelconque d'arguments. En plus de développer les macros, m4
a des fonctions prédéfinies pour inclure des fichiers nommés, lancer
des commandes UNIX, faire de l'arithmétique d'entiers, manipuler du
texte de diverses manières, faire de la récursivité, etc. M4 peut être
utilisé soit comme frontal d'un compilateur, ou comme processeur de macros
à part.</para></sect4>
 
</sect3>
 
</sect2>
 
/trunk/lfs/appendixa/gcc.xml
1,10 → 1,10
<sect1 id="aa-gcc">
<title>GCC</title>
<?dbhtml filename="gcc.html" dir="appendixa"?>
 
&aa-gcc-down;
&aa-gcc-desc;
&aa-gcc-dep;
 
</sect1>
 
<sect1 id="aa-gcc">
<title>GCC</title>
<?dbhtml filename="gcc.html" dir="appendixa"?>
 
&aa-gcc-down;
&aa-gcc-desc;
&aa-gcc-dep;
 
</sect1>
 
/trunk/lfs/appendixa/groff.xml
1,10 → 1,10
<sect1 id="aa-groff">
<title>Groff</title>
<?dbhtml filename="groff.html" dir="appendixa"?>
 
&aa-groff-down;
&aa-groff-desc;
&aa-groff-dep;
 
</sect1>
 
<sect1 id="aa-groff">
<title>Groff</title>
<?dbhtml filename="groff.html" dir="appendixa"?>
 
&aa-groff-down;
&aa-groff-desc;
&aa-groff-dep;
 
</sect1>
 
/trunk/lfs/appendixa/lilo-dep.xml
1,18 → 1,18
<sect2>
<title>Dependencies</title>
 
<para>Lilo-&lilo-depversion; needs the following to be installed:</para>
 
<literallayout>
bash: sh
bin86: as86, ld86
binutils: as, ld, strip
fileutils: cp, dd, ln
gcc: cc, cc1, collect2, cpp0
make: make
sed: sed
textutils: cat
</literallayout>
 
</sect2>
 
<sect2>
<title>Dépendances</title>
 
<para>Lilo-&lilo-depversion; nécessite que les programmes suivants soient installés:</para>
 
<literallayout>
bash: sh
bin86: as86, ld86
binutils: as, ld, strip
fileutils: cp, dd, ln
gcc: cc, cc1, collect2, cpp0
make: make
sed: sed
textutils: cat
</literallayout>
 
</sect2>
 
/trunk/lfs/appendixa/flex-desc.xml
1,39 → 1,37
<sect2><title>Contents of flex-&flex-contversion;</title>
 
<sect3><title>Program Files</title>
<para>flex, flex++ (link to flex) and lex</para></sect3>
 
<sect3><title>Descriptions</title>
 
<sect4><title>flex</title>
<para>flex is a tool for generating programs which recognize
patterns in text. Pattern recognition is very useful in many applications.
A user sets up rules
what to look for and flex will make a program that looks for those
patterns. The reason people use flex is that it is much easier to sets up
rules for what to look for than to write the actual program that finds
the text.</para></sect4>
 
<sect4><title>flex++</title>
<para>flex++ invokes a version of flex which is used exclusively for
C++ scanners.</para></sect4>
 
<sect4><title>lex</title>
<para>We create a yacc script which calls flex using the -l option.
This is for compatibility purposes for programs which use lex instead
of flex.</para></sect4>
 
</sect3>
 
<sect3><title>Library Files</title>
<para>libfl.a</para></sect3>
 
<sect3><title>Descriptions</title>
 
<sect4><title>libfl</title>
<para>No description is currently available.</para></sect4>
 
</sect3>
 
</sect2>
 
<sect2><title>Contenu de flex-&flex-contversion;</title>
 
<sect3><title>Programmes</title>
<para>flex, flex++ (link to flex) et lex</para></sect3>
 
<sect3><title>Descriptions</title>
 
<sect4><title>flex</title>
<para>Flex est un utilitaire destiné à générer des programmes pour la reconnaissance
de motifs dans des textes. La reconnaissance de motifs est très utile dans de nombreuses
applications. Un utilisateur définit des règles à rechercher et flex créera un programme
destiné à reconnaître ces motifs. Utiliser flex est un avantage car il est beaucoup plus
facile de définir des règles de recherche que d'écrire un programme pour repérer le texte
voulu.</para></sect4>
 
<sect4><title>flex++</title>
<para>flex++ invoque une version de flex utilisé exclusivement par les scanners
C++.</para></sect4>
 
<sect4><title>lex</title>
<para>Nous créons un script yacc qui appelle flex avec l'option -l. Ceci est fait pour des
raisons de compatibilité avec les programmes utilisant lex au lieu de flex.</para></sect4>
 
</sect3>
 
<sect3><title>Bibliothèques</title>
<para>libfl.a</para></sect3>
 
<sect3><title>Descriptions</title>
 
<sect4><title>libfl</title>
<para>Aucune description actuellement disponible.</para></sect4>
 
</sect3>
 
</sect2>
 
/trunk/lfs/appendixa/gzip-dep.xml
1,19 → 1,19
<sect2>
<title>Dependencies</title>
 
<para>Gzip-&gzip-depversion; needs the following to be installed:</para>
 
<literallayout>
bash: sh
binutils: as, ld, nm
fileutils: chmod, cp, install, ln, mv, rm
gcc: cc1, collect2, cpp, cpp0, gcc
grep: egrep, grep
make: make
sed: sed
sh-utils: hostname
textutils: cat, tr
</literallayout>
 
</sect2>
 
<sect2>
<title>Dépendances</title>
 
<para>Gzip-&gzip-depversion; needs the following to be installed:</para>
 
<literallayout>
bash: sh
binutils: as, ld, nm
fileutils: chmod, cp, install, ln, mv, rm
gcc: cc1, collect2, cpp, cpp0, gcc
grep: egrep, grep
make: make
sed: sed
sh-utils: hostname
textutils: cat, tr
</literallayout>
 
</sect2>
 
/trunk/lfs/appendixa/makedev-down.xml
1,7 → 1,7
<sect2>
<title>Official Download Location</title>
 
<para><literallayout>MAKEDEV (&makedev-version;):
<ulink url="&ftp;/">&ftp;/</ulink>
<ulink url="&http;/">&http;/</ulink></literallayout></para>
</sect2>
<sect2>
<title>Site officiel de téléchargement</title>
 
<para><literallayout>MAKEDEV (&makedev-version;):
<ulink url="&ftp;/">&ftp;/</ulink>
<ulink url="&http;/">&http;/</ulink></literallayout></para>
</sect2>
/trunk/lfs/appendixa/introduction.xml
1,56 → 1,53
<sect1 id="aa-intro">
<title>Introduction</title>
<?dbhtml filename="introduction.html" dir="appendixa"?>
 
<para>This appendix describes the following aspects of every package
that is installed in this book:</para>
 
<itemizedlist>
 
<listitem><para>The official download location for the
package.</para></listitem>
 
<listitem><para>What the package contains.</para></listitem>
 
<listitem><para>What each program from a package does.</para></listitem>
 
<listitem><para>What each package needs to compile.</para></listitem>
 
</itemizedlist>
 
<para>Most information about these packages (especially the descriptions of
them) come from the man pages from those packages. We are not going to print
the entire man page, just the core elements to make it possible to
understand what a program does. To get knowledge of all details on a program,
we suggest you start by reading the complete man page in addition to
this appendix.</para>
 
<para>Certain packages are documented in more depth
than others, because we just happen to know more about certain
packages than I know about others. If anything should be added to the
following descriptions, please don't hesitate to email the mailing
lists. We intend that the list should contain an in-depth description
of every package installed, but we can't do it without help.</para>
 
<para>Please note that currently only what a package does is described and not
why it needs to be installed. This may be added later.</para>
 
<para>Also listed are all of the installation dependencies for all the
packages that are installed in this book. The listings will include
which programs from which packages are needed to successfully compile
the package to be installed.</para>
 
<para>These are not running dependencies, meaning they don't tell you
what programs are needed to use that packages programs. Just the ones
needed to compile it.</para>
 
<para>The dependency list can be, from time to time, outdated in regards
to the current used package version. Checking dependencies takes quite a
bit of work, so they may lag behind a bit on the package update. But
often with minor package updates, the installation dependencies hardly
change, so they'll be current in most cases. If we upgrade to a major
new release, we'll make sure the dependencies are checked too at the
same time.</para>
 
</sect1>
 
<sect1 id="aa-intro">
<title>Introduction</title>
<?dbhtml filename="introduction.html" dir="appendixa"?>
 
<para>Cet annexe décrit les aspects suivants des packages installés dans ce
livre:</para>
 
<itemizedlist>
 
<listitem><para>Le site officiel de téléchargement pour le package.
</para></listitem>
 
<listitem><para>Ce que le package contient.</para></listitem>
 
<listitem><para>Ce que chaque programme du package réalise.</para></listitem>
 
<listitem><para>Ce que chaque package a besoin pour compiler.</para></listitem>
 
</itemizedlist>
 
<para>Beaucoup d'informations sur ces packages (principalement les descriptions)
proviennent des pages man, contenues dans ces packages. Nous n'allons pas ré écrire la
totalité de la page man, mais simplement les éléments principaux pour permettre la
compréhension de l'utilité du package. Pour disposer de tous les détails sur un programme,
nous vous suggérons de commencer par lire la page man complète en plus de cet
appencide.</para>
 
<para>Certains packages sont documentés plus en profondeur que d'autres, parce que nous
en savons plus sur ceux-là. Si quelque chose doit être ajoutés aux descriptions, n'hésitez
surtout pas à nous envoyer un email à la mailing list. Nous avons l'intention que cette
liste contienne une description en profondeur de chaque package installé, mais nous ne
pouvons pas le faire sans aide.</para>
 
<para>Remarquez aussi qu'actuellement, seul ce que fait un package est décrit. Pourquoi
il doit être installé n'est pas encore couvert. Ceci pourra être ajouté plus tard.</para>
 
<para>Toutes les dépendances de chaque package installé avec ce livre sont décrites.
Seront inclus les programmes de chaque package nécessaires pour compiler le package à
installer.</para>
 
<para>Ce ne sont pas des dépendances lors de l'exécution, c'est-à-dire ceux dont vous
avez besoin pour les lancer. Uniquement ceux nécessaire pour la compilation.</para>
 
<para>La liste de dépendances peut ne pas être à jour de temps en temps à cause de
la version courant du package. Vérifier les dépendances demande un travail important,
donc il peut y avaoir du temps avec une mise à jour. Mais souvent avec des mises à jour
mineurs d'un package, les dépendances d'installation changent peu, donc elles seront
correctes dans la plupart des cas. Si nous mettons à jour vers une nouvelle version
majeure, nous devons nous assurer que les dépendances ont aussi été vérifié en même
temps.</para>
 
</sect1>
 
/trunk/lfs/appendixa/make-down.xml
1,6 → 1,6
<sect2>
<title>Official Download Location</title>
 
<para><literallayout>Make (&make-version;):
<ulink url="ftp://ftp.gnu.org/gnu/make/">ftp://ftp.gnu.org/gnu/make/</ulink></literallayout></para>
</sect2>
<sect2>
<title>Site officiel de téléchargement</title>
 
<para><literallayout>Make (&make-version;):
<ulink url="ftp://ftp.gnu.org/gnu/make/">ftp://ftp.gnu.org/gnu/make/</ulink></literallayout></para>
</sect2>
/trunk/lfs/appendixa/kernel-down.xml
1,6 → 1,6
<sect2>
<title>Official Download Location</title>
 
<para><literallayout>Linux Kernel (&kernel-version;):
<ulink url="ftp://ftp.kernel.org/pub/linux/kernel/">ftp://ftp.kernel.org/pub/linux/kernel/</ulink></literallayout></para>
</sect2>
<sect2>
<title>Site officiel de téléchargement</title>
 
<para><literallayout>Linux Kernel (&kernel-version;):
<ulink url="ftp://ftp.kernel.org/pub/linux/kernel/">ftp://ftp.kernel.org/pub/linux/kernel/</ulink></literallayout></para>
</sect2>
/trunk/lfs/appendixa/lilo.xml
1,10 → 1,10
<sect1 id="aa-lilo">
<title>Lilo</title>
<?dbhtml filename="lilo.html" dir="appendixa"?>
 
&aa-lilo-down;
&aa-lilo-desc;
&aa-lilo-dep;
 
</sect1>
 
<sect1 id="aa-lilo">
<title>Lilo</title>
<?dbhtml filename="lilo.html" dir="appendixa"?>
 
&aa-lilo-down;
&aa-lilo-desc;
&aa-lilo-dep;
 
</sect1>
 
/trunk/lfs/appendixa/gcc-down.xml
1,10 → 1,10
<sect2>
<title>Official Download Location</title>
 
<para><literallayout>GCC (&gcc-version;):
<ulink url="ftp://ftp.gnu.org/pub/gnu/gcc/">ftp://ftp.gnu.org/pub/gnu/gcc/</ulink>
 
GCC Patch (&gcc-patch-version;):
<ulink url="&ftp;/">&ftp;/</ulink>
<ulink url="&http;/">&http;/</ulink></literallayout></para>
</sect2>
<sect2>
<title>Site officiel de téléchargement</title>
 
<para><literallayout>GCC (&gcc-version;):
<ulink url="ftp://ftp.gnu.org/pub/gnu/gcc/">ftp://ftp.gnu.org/pub/gnu/gcc/</ulink>
 
GCC Patch (&gcc-patch-version;):
<ulink url="&ftp;/">&ftp;/</ulink>
<ulink url="&http;/">&http;/</ulink></literallayout></para>
</sect2>
/trunk/lfs/appendixa/lilo-down.xml
1,8 → 1,8
<sect2>
<title>Official Download Location</title>
 
<para><literallayout>Lilo (&lilo-version;):
<ulink url="ftp://ibiblio.org/pub/Linux/system/boot/lilo/">ftp://ibiblio.org/pub/Linux/system/boot/lilo/</ulink>
<ulink
url="http://ibiblio.org/pub/Linux/system/boot/lilo/">http://ibiblio.org/pub/Linux/system/boot/lilo/</ulink></literallayout></para>
</sect2>
<sect2>
<title>Site officiel de téléchargement</title>
 
<para><literallayout>Lilo (&lilo-version;):
<ulink url="ftp://ibiblio.org/pub/Linux/system/boot/lilo/">ftp://ibiblio.org/pub/Linux/system/boot/lilo/</ulink>
<ulink
url="http://ibiblio.org/pub/Linux/system/boot/lilo/">http://ibiblio.org/pub/Linux/system/boot/lilo/</ulink></literallayout></para>
</sect2>
/trunk/lfs/appendixa/gzip.xml
1,10 → 1,10
<sect1 id="aa-gzip">
<title>Gzip</title>
<?dbhtml filename="gzip.html" dir="appendixa"?>
 
&aa-gzip-down;
&aa-gzip-desc;
&aa-gzip-dep;
 
</sect1>
 
<sect1 id="aa-gzip">
<title>Gzip</title>
<?dbhtml filename="gzip.html" dir="appendixa"?>
 
&aa-gzip-down;
&aa-gzip-desc;
&aa-gzip-dep;
 
</sect1>
 
/trunk/lfs/appendixa/glibc.xml
1,10 → 1,10
<sect1 id="aa-glibc">
<title>Glibc</title>
<?dbhtml filename="glibc.html" dir="appendixa"?>
 
&aa-glibc-down;
&aa-glibc-desc;
&aa-glibc-dep;
 
</sect1>
 
<sect1 id="aa-glibc">
<title>Glibc</title>
<?dbhtml filename="glibc.html" dir="appendixa"?>
 
&aa-glibc-down;
&aa-glibc-desc;
&aa-glibc-dep;
 
</sect1>
 
/trunk/lfs/appendixa/make-dep.xml
1,26 → 1,26
<sect2>
<title>Dependencies</title>
 
<para>Make-&make-depversion; needs the following to be installed:</para>
 
<literallayout>
autoconf: autoconf, autoheader
automake: aclocal, automake
bash: sh
binutils: as, ld
diffutils: cmp
fileutils: chgrp, chmod, install, ls, mv, rm
gcc: cc, cc1, collect2, cpp0, gcc
glibc: getconf
grep: egrep, fgrep, grep
m4: m4
make: make
mawk: mawk
sed: sed
sh-utils: basename, echo, expr, hostname, sleep, uname
texinfo: install-info, makeinfo
textutils: cat, tr
</literallayout>
 
</sect2>
 
<sect2>
<title>Dépendances</title>
 
<para>Make-&make-depversion; nécessite que les programmes suivants soient installés:</para>
 
<literallayout>
autoconf: autoconf, autoheader
automake: aclocal, automake
bash: sh
binutils: as, ld
diffutils: cmp
fileutils: chgrp, chmod, install, ls, mv, rm
gcc: cc, cc1, collect2, cpp0, gcc
glibc: getconf
grep: egrep, fgrep, grep
m4: m4
make: make
mawk: mawk
sed: sed
sh-utils: basename, echo, expr, hostname, sleep, uname
texinfo: install-info, makeinfo
textutils: cat, tr
</literallayout>
 
</sect2>
 
/trunk/lfs/appendixa/gettext-dep.xml
1,26 → 1,26
<sect2>
<title>Dependencies</title>
 
<para>Gettext-&gettext-depversion; needs the following to be installed:</para>
 
<literallayout>
autoconf: autoconf, autoheader
automake: aclocal, automake
bash: sh
binutils: ar, as, ld, nm, ranlib, strip
bison: bison
diffutils: cmp
fileutils: chmod, install, ln, ls, mkdir, mv, rm, rmdir
gcc: cc, cc1, collect2, cpp0, gcc
grep: egrep, fgrep, grep
m4: m4
make: make
mawk: mawk
sed: sed
sh-utils: basename, echo, expr, hostname, sleep, uname
texinfo: install-info, makeinfo
textutils: cat, sort, tr, uniq
</literallayout>
 
</sect2>
 
<sect2>
<title>Dépendances</title>
 
<para>Gettext-&gettext-depversion; nécessite que les programmes suivants soient installés:</para>
 
<literallayout>
autoconf: autoconf, autoheader
automake: aclocal, automake
bash: sh
binutils: ar, as, ld, nm, ranlib, strip
bison: bison
diffutils: cmp
fileutils: chmod, install, ln, ls, mkdir, mv, rm, rmdir
gcc: cc, cc1, collect2, cpp0, gcc
grep: egrep, fgrep, grep
m4: m4
make: make
mawk: mawk
sed: sed
sh-utils: basename, echo, expr, hostname, sleep, uname
texinfo: install-info, makeinfo
textutils: cat, sort, tr, uniq
</literallayout>
 
</sect2>
 
/trunk/lfs/appendixa/flex.xml
1,10 → 1,10
<sect1 id="aa-flex">
<title>Flex</title>
<?dbhtml filename="flex.html" dir="appendixa"?>
 
&aa-flex-down;
&aa-flex-desc;
&aa-flex-dep;
 
</sect1>
 
<sect1 id="aa-flex">
<title>Flex</title>
<?dbhtml filename="flex.html" dir="appendixa"?>
 
&aa-flex-down;
&aa-flex-desc;
&aa-flex-dep;
 
</sect1>
 
/trunk/lfs/appendixa/kbd-dep.xml
1,24 → 1,24
<sect2>
<title>Dependencies</title>
 
<para>Kbd-&kbd-depversion; needs the following to be installed:</para>
 
<literallayout>
bash: sh
binutils: as, ld, strip
bison: bison
diffutils: cmp
fileutils: cp, install, ln, mv, rm
flex: flex
gettext: msgfmt, xgettext
gcc: cc1, collect2, cpp0, gcc
grep: grep
gzip: gunzip, gzip
make: make
patch: patch
sed: sed
sh-utils: uname
</literallayout>
 
</sect2>
 
<sect2>
<title>Dépendances</title>
 
<para>Kbd-&kbd-depversion; nécessite que les programmes suivants soient installés:</para>
 
<literallayout>
bash: sh
binutils: as, ld, strip
bison: bison
diffutils: cmp
fileutils: cp, install, ln, mv, rm
flex: flex
gettext: msgfmt, xgettext
gcc: cc1, collect2, cpp0, gcc
grep: grep
gzip: gunzip, gzip
make: make
patch: patch
sed: sed
sh-utils: uname
</literallayout>
 
</sect2>
 
/trunk/lfs/appendixa/make.xml
1,10 → 1,10
<sect1 id="aa-make">
<title>Make</title>
<?dbhtml filename="make.html" dir="appendixa"?>
 
&aa-make-down;
&aa-make-desc;
&aa-make-dep;
 
</sect1>
 
<sect1 id="aa-make">
<title>Make</title>
<?dbhtml filename="make.html" dir="appendixa"?>
 
&aa-make-down;
&aa-make-desc;
&aa-make-dep;
 
</sect1>
 
/trunk/lfs/appendixa/less-desc.xml
1,26 → 1,29
<sect2><title>Contents of less-&less-contversion;</title>
 
<sect3><title>Program Files</title>
<para>less, lessecho and lesskey</para></sect3>
 
<sect3><title>Description</title>
 
<sect4><title>less</title>
<para>The less program is a file pager (or text viewer). It
displays the contents of a file with the ability to scroll. Less is an
improvement on the common pager called <quote>more</quote>. Less has
the ability to scroll backwards through files as well and it doesn't need
to read the entire file when it starts, which makes it faster when reading
large files.</para></sect4>
 
<sect4><title>lessecho</title>
<para>lessecho is needed to expand metacharacters, such as * and ?, in
filenames on Unix systems.</para></sect4>
 
<sect4><title>lesskey</title>
<para>lesskey is used to specify key bindings for less.</para></sect4>
 
</sect3>
 
</sect2>
 
<sect2><title>Contenu de less-&less-contversion;</title>
 
<sect3><title>Programmes</title>
<para>less, lessecho et lesskey</para></sect3>
 
<sect3><title>Description</title>
 
<sect4><title>less</title>
<para>Le noyau de Linux est au coeur de chaque système Linux. C'est lui
qui fait tourner Linux. Quand vous allumez votre ordinateur et démarrez
un système Linux, la toute première partie de logiciel Linux qui est
chargée est le noyau. Le noyau initialise les composants matériels du
système comme les ports série, les ports parallèles, les cartes son,
les cartes réseau, les contrôleurs IDE, les contrôleurs SCSI et beaucoup
d'autres choses. En bref, le noyau rend le matériel disponible pour que
le logiciel puisse fonctionner.</para></sect4>
 
<sect4><title>lessecho</title>
<para>lessecho est utile pour étendre les méta caractères, comme * et ?,
dans les noms de fichiers sur les systèmes Unix.</para></sect4>
 
<sect4><title>lesskey</title>
<para>lesskey est utilisé pour spécifier les associations de touches à
less.</para></sect4>
 
</sect3>
 
</sect2>
 
/trunk/lfs/appendixa/makedev-dep.xml
1,14 → 1,14
<sect2>
<title>Dependencies</title>
 
<para>MAKEDEV-&makedev-depversion; needs the following to be installed:</para>
 
<literallayout>
bash: sh
fileutils: chmod, chown, cp, ln, mknod, mv, rm
grep: grep
sh-utils: expr, id
</literallayout>
 
</sect2>
 
<sect2>
<title>Dépendances</title>
 
<para>MAKEDEV-&makedev-depversion; nécessite que les programmes suivants soient installés:</para>
 
<literallayout>
bash: sh
fileutils: chmod, chown, cp, ln, mknod, mv, rm
grep: grep
sh-utils: expr, id
</literallayout>
 
</sect2>
 
/trunk/lfs/appendixa/m4-dep.xml
1,20 → 1,20
<sect2>
<title>Dependencies</title>
 
<para>M4-&m4-depversion; needs the following to be installed:</para>
 
<literallayout>
bash: sh
binutils: ar, as, ld, ranlib
diffutils: cmp
fileutils: chmod, cp, install, mv, rm
make: make
gcc: cc1, collect2, cpp0, gcc
grep: egrep, grep
sed: sed
sh-utils: date, echo, hostname
textutils: cat, tr
</literallayout>
 
</sect2>
 
<sect2>
<title>Dépendances</title>
 
<para>M4-&m4-depversion; nécessite que les programmes suivants soient installés:</para>
 
<literallayout>
bash: sh
binutils: ar, as, ld, ranlib
diffutils: cmp
fileutils: chmod, cp, install, mv, rm
make: make
gcc: cc1, collect2, cpp0, gcc
grep: egrep, grep
sed: sed
sh-utils: date, echo, hostname
textutils: cat, tr
</literallayout>
 
</sect2>
 
/trunk/lfs/appendixa/gettext-desc.xml
1,43 → 1,43
<sect2><title>Contents of gettext-&gettext-contversion;</title>
 
<sect3><title>Program Files</title>
<para>gettext, gettextize, msgcmp, msgcomm, msgfmt, msgmerge, msgunfmt,
ngettext and xgettext</para></sect3>
 
<sect3><title>Descriptions</title>
 
<sect4><title>gettext</title>
<para>The gettext package is used for internationalization (also known as
i18n) and for localization (also known as l10n). Programs can be
compiled with Native Language Support (NLS) which enable them to output
messages in the users native language rather than in the default English
language.</para></sect4>
 
<sect4><title>gettextize</title>
<para>No description is currently available.</para></sect4>
 
<sect4><title>msgcmp</title>
<para>No description is currently available.</para></sect4>
 
<sect4><title>msgcomm</title>
<para>No description is currently available.</para></sect4>
 
<sect4><title>msgfmt</title>
<para>No description is currently available.</para></sect4>
 
<sect4><title>msgmerge</title>
<para>No description is currently available.</para></sect4>
 
<sect4><title>msgunfmt</title>
<para>No description is currently available.</para></sect4>
 
<sect4><title>ngettext</title>
<para>No description is currently available.</para></sect4>
 
<sect4><title>xgettext</title>
<para>No description is currently available.</para></sect4>
 
</sect3>
 
</sect2>
 
<sect2><title>Contenu de gettext-&gettext-contversion;</title>
 
<sect3><title>Programmes</title>
<para>gettext, gettextize, msgcmp, msgcomm, msgfmt, msgmerge, msgunfmt,
ngettext et xgettext</para></sect3>
 
<sect3><title>Descriptions</title>
 
<sect4><title>gettext</title>
<para>Le package gettext est utilisé pour l'internationalisation (aussi nommée
i18n) et pour la localisation (connue aussi sous le nom de l10n). Les programmes
peuvent ainsi être compilés avec le support de langue native (Native Language
Support) pour permettre l'affichage dans la langue native de l'utilisateur
plutôt qu'en anglais qui est la langue par défaut.</para></sect4>
 
<sect4><title>gettextize</title>
<para>Aucune description actuellement disponible.</para></sect4>
 
<sect4><title>msgcmp</title>
<para>Aucune description actuellement disponible.</para></sect4>
 
<sect4><title>msgcomm</title>
<para>Aucune description actuellement disponible.</para></sect4>
 
<sect4><title>msgfmt</title>
<para>Aucune description actuellement disponible.</para></sect4>
 
<sect4><title>msgmerge</title>
<para>Aucune description actuellement disponible.</para></sect4>
 
<sect4><title>msgunfmt</title>
<para>Aucune description actuellement disponible.</para></sect4>
 
<sect4><title>ngettext</title>
<para>Aucune description actuellement disponible.</para></sect4>
 
<sect4><title>xgettext</title>
<para>Aucune description actuellement disponible.</para></sect4>
 
</sect3>
 
</sect2>
 
/trunk/lfs/appendixa/gcc-dep.xml
1,24 → 1,24
<sect2>
<title>Dependencies</title>
 
<para>GCC-&gcc-depversion; needs the following to be installed:</para>
 
<literallayout>
bash: sh
binutils: ar, as, ld, nm, ranlib
diffutils: cmp
fileutils: chmod, cp, ln, ls, mkdir, mv, rm, touch
find: find
gcc: cc, cc1, collect2, cpp0, gcc
grep: egrep, grep
make: make
patch: patch
sed: sed
sh-utils: basename, dirname, echo, expr, hostname, sleep, true, uname
tar: tar
texinfo: install-info, makeinfo
textutils: cat, tail, tr
</literallayout>
 
</sect2>
 
<sect2>
<title>Dépendances</title>
 
<para>GCC-&gcc-depversion; nécessite que les programmes suivants soient installés:</para>
 
<literallayout>
bash: sh
binutils: ar, as, ld, nm, ranlib
diffutils: cmp
fileutils: chmod, cp, ln, ls, mkdir, mv, rm, touch
find: find
gcc: cc, cc1, collect2, cpp0, gcc
grep: egrep, grep
make: make
patch: patch
sed: sed
sh-utils: basename, dirname, echo, expr, hostname, sleep, true, uname
tar: tar
texinfo: install-info, makeinfo
textutils: cat, tail, tr
</literallayout>
 
</sect2>
 
/trunk/lfs/appendixa/grep-down.xml
1,6 → 1,6
<sect2>
<title>Official Download Location</title>
 
<para><literallayout>Grep (&grep-version;):
<ulink url="ftp://ftp.gnu.org/gnu/grep/">ftp://ftp.gnu.org/gnu/grep/</ulink></literallayout></para>
</sect2>
<sect2>
<title>Site officiel de téléchargement</title>
 
<para><literallayout>Grep (&grep-version;):
<ulink url="ftp://ftp.gnu.org/gnu/grep/">ftp://ftp.gnu.org/gnu/grep/</ulink></literallayout></para>
</sect2>
/trunk/lfs/appendixa/libtool.xml
1,10 → 1,10
<sect1 id="aa-libtool">
<title>Libtool</title>
<?dbhtml filename="libtool.html" dir="appendixa"?>
 
&aa-libtool-down;
&aa-libtool-desc;
&aa-libtool-dep;
 
</sect1>
 
<sect1 id="aa-libtool">
<title>Libtool</title>
<?dbhtml filename="libtool.html" dir="appendixa"?>
 
&aa-libtool-down;
&aa-libtool-desc;
&aa-libtool-dep;
 
</sect1>
 
/trunk/lfs/appendixa/gzip-down.xml
1,11 → 1,11
<sect2>
<title>Official Download Location</title>
 
<para><literallayout>Gzip (&gzip-version;):
<ulink url="ftp://ftp.gnu.org/gnu/gzip/">ftp://ftp.gnu.org/gnu/gzip/</ulink>
 
Gzip Patch (&gzip-version;):
<ulink url="&ftp;/">&ftp;/</ulink>
<ulink url="&http;/">&http;/</ulink></literallayout></para>
 
</sect2>
<sect2>
<title>Site officiel de téléchargement</title>
 
<para><literallayout>Gzip (&gzip-version;):
<ulink url="ftp://ftp.gnu.org/gnu/gzip/">ftp://ftp.gnu.org/gnu/gzip/</ulink>
 
Gzip Patch (&gzip-version;):
<ulink url="&ftp;/">&ftp;/</ulink>
<ulink url="&http;/">&http;/</ulink></literallayout></para>
 
</sect2>
/trunk/lfs/appendixa/kernel.xml
1,10 → 1,10
<sect1 id="aa-kernel">
<title>Linux kernel</title>
<?dbhtml filename="kernel.html" dir="appendixa"?>
 
&aa-kernel-down;
&aa-kernel-desc;
&aa-kernel-dep;
 
</sect1>
 
<sect1 id="aa-kernel">
<title>Linux kernel</title>
<?dbhtml filename="kernel.html" dir="appendixa"?>
 
&aa-kernel-down;
&aa-kernel-desc;
&aa-kernel-dep;
 
</sect1>
 
/trunk/lfs/appendixa/makedev-desc.xml
1,17 → 1,19
<sect2><title>Contents of MAKEDEV-&makedev-contversion;</title>
 
<sect3><title>Program Files</title>
<para>MAKEDEV</para></sect3>
 
<sect3><title>Descriptions</title>
 
<sect4><title>MAKEDEV</title>
<para>MAKEDEV is a script that can help in creating the necessary static
device files that usually reside in the /dev directory. More
information on device nodes can be found in the Linux Kernel source tree
in <filename>Documentation/devices.txt</filename>.</para></sect4>
 
</sect3>
 
</sect2>
 
<sect2><title>Contenu de MAKEDEV-&makedev-contversion;</title>
 
<sect3><title>Programmes</title>
<para>MAKEDEV</para></sect3>
 
<sect3><title>Descriptions</title>
 
<sect4><title>MAKEDEV</title>
<para>MAKEDEV est un script qui peut aider à créer les fichiers
périphériques statiques nécessaires, qui se trouvent généralement
dans le répertoire /dev. Plus d'informations sur les fichiers
périphériques sont disponibles à partir de la hiérarchie des
sources du noyau dans le fichier
<filename>Documentation/devices.txt</filename>.</para></sect4>
 
</sect3>
 
</sect2>
 
/trunk/lfs/appendixa/make-desc.xml
1,15 → 1,16
<sect2><title>Contents of make-&make-contversion;</title>
 
<sect3><title>Program files</title>
<para>make</para></sect3>
 
<sect3><title>Descriptions</title>
 
<sect4><title>make</title>
<para>make determines automatically which pieces of a large program need to be
recompiled, and issues the commands to recompile them.</para></sect4>
 
</sect3>
 
</sect2>
 
<sect2><title>Contenu de make-&make-contversion;</title>
 
<sect3><title>Programmes</title>
<para>make</para></sect3>
 
<sect3><title>Descriptions</title>
 
<sect4><title>make</title>
<para>make détermine automatiquement quelles parties d'un gros programme
ont besoin d'être recompilées, et exécute les commandes pour les
recompiler.</para></sect4>
 
</sect3>
 
</sect2>
 
/trunk/lfs/appendixa/kernel-desc.xml
1,26 → 1,28
<sect2><title>Contents of kernel-&kernel-contversion;</title>
 
<sect3><title>Support Files</title>
<para>the linux kernel and the linux kernel headers</para></sect3>
 
<sect3><title>Descriptions</title>
 
<sect4><title>linux kernel</title>
<para>The Linux kernel is at the core of every Linux system. It's what makes
Linux tick. When a computer is turned on and boots a Linux system, the
very first piece of Linux software that gets loaded is the kernel. The
kernel initializes the system's hardware components such as serial
ports, parallel ports, sound cards, network cards, IDE controllers, SCSI
controllers and a lot more. In a nutshell the kernel makes the hardware
available so that the software can run.</para></sect4>
 
<sect4><title>linux kernel headers</title>
<para>These are the files we copy to /usr/include/{linux,asm} in chapter
5. They should match those which glibc was compiled against and so
should <emphasis>not</emphasis> be replaced when upgrading the kernel.
They are essential for compiling many programs.</para></sect4>
 
</sect3>
 
</sect2>
 
<sect2><title>Contenu de kernel-&kernel-contversion;</title>
 
<sect3><title>Support Files</title>
<para>le noyau linux et les entêtes du noyau linux</para></sect3>
 
<sect3><title>Descriptions</title>
 
<sect4><title>noyau linux</title>
<para>Le noyau de Linux est au coeur de chaque système Linux. C'est lui
qui fait tourner Linux. Quand vous allumez votre ordinateur et démarrez
un système Linux, la toute première partie de logiciel Linux qui est
chargée est le noyau. Le noyau initialise les composants matériels du
système comme les ports série, les ports parallèles, les cartes son,
les cartes réseau, les contrôleurs IDE, les contrôleurs SCSI et beaucoup
d'autres choses. En bref, le noyau rend le matériel disponible pour que
le logiciel puisse fonctionner.</para></sect4>
 
<sect4><title>entêtes du noyau linux</title>
<para>Nous copions ces fichiers dans /usr/include/(linux,asm) lors du
chapitre 5. Ils doivent correspondre à ceux avec lesquels glibc a été
compilé et ne doivent <emphasis>pas</emphasis> être remplacé lors d'une
mise à jour du kernel. Ils sont essentiels pour compiler un grand
nombre de logiciels.</para></sect4>
 
</sect3>
 
</sect2>
 
/trunk/lfs/appendixa/grep-dep.xml
1,27 → 1,27
<sect2>
<title>Dependencies</title>
 
<para>Grep-&grep-depversion; needs the following to be installed:</para>
 
<literallayout>
autoconf: autoconf, autoheader
automake: aclocal, automake
bash: sh
binutils: as, ld
diffutils: cmp
fileutils: chmod, install, ls, mkdir, mv, rm
gettext: msgfmt, xgettext
gcc: cc, cc1, collect2, cpp0, gcc
glibc: getconf
grep: egrep, fgrep, grep
m4: m4
make: make
mawk: mawk
sed: sed
sh-utils: basename, echo, expr, hostname, sleep, uname
texinfo: install-info, makeinfo
textutils: cat, tr
</literallayout>
 
</sect2>
 
<sect2>
<title>Dépendances</title>
 
<para>Grep-&grep-depversion; nécessite que les programmes suivants soient installés:</para>
 
<literallayout>
autoconf: autoconf, autoheader
automake: aclocal, automake
bash: sh
binutils: as, ld
diffutils: cmp
fileutils: chmod, install, ls, mkdir, mv, rm
gettext: msgfmt, xgettext
gcc: cc, cc1, collect2, cpp0, gcc
glibc: getconf
grep: egrep, fgrep, grep
m4: m4
make: make
mawk: mawk
sed: sed
sh-utils: basename, echo, expr, hostname, sleep, uname
texinfo: install-info, makeinfo
textutils: cat, tr
</literallayout>
 
</sect2>
 
/trunk/lfs/appendixa/kbd-down.xml
1,10 → 1,10
<sect2>
<title>Official Download Location</title>
 
<para><literallayout>Kbd (&kbd-version;):
<ulink url="ftp://ftp.win.tue.nl/pub/linux-local/utils/kbd/">ftp://ftp.win.tue.nl/pub/linux-local/utils/kbd/</ulink>
 
Kbd Patch (&kbd-patch-version;):
<ulink url="&ftp;/">&ftp;/</ulink>
<ulink url="&http;/">&http;/</ulink></literallayout></para>
</sect2>
<sect2>
<title>Site officiel de téléchargement</title>
 
<para><literallayout>Kbd (&kbd-version;):
<ulink url="ftp://ftp.win.tue.nl/pub/linux-local/utils/kbd/">ftp://ftp.win.tue.nl/pub/linux-local/utils/kbd/</ulink>
 
Kbd Patch (&kbd-patch-version;):
<ulink url="&ftp;/">&ftp;/</ulink>
<ulink url="&http;/">&http;/</ulink></literallayout></para>
</sect2>
/trunk/lfs/appendixa/less.xml
1,10 → 1,10
<sect1 id="aa-less">
<title>Less</title>
<?dbhtml filename="less.html" dir="appendixa"?>
 
&aa-less-down;
&aa-less-desc;
&aa-less-dep;
 
</sect1>
 
<sect1 id="aa-less">
<title>Less</title>
<?dbhtml filename="less.html" dir="appendixa"?>
 
&aa-less-down;
&aa-less-desc;
&aa-less-dep;
 
</sect1>
 
/trunk/lfs/appendixa/groff-down.xml
1,6 → 1,6
<sect2>
<title>Official Download Location</title>
 
<para><literallayout>Groff (&groff-version;):
<ulink url="ftp://ftp.gnu.org/gnu/groff/">ftp://ftp.gnu.org/gnu/groff/</ulink></literallayout></para>
</sect2>
<sect2>
<title>Site officiel de téléchargement</title>
 
<para><literallayout>Groff (&groff-version;):
<ulink url="ftp://ftp.gnu.org/gnu/groff/">ftp://ftp.gnu.org/gnu/groff/</ulink></literallayout></para>
</sect2>
/trunk/lfs/appendixa/libtool-down.xml
1,6 → 1,6
<sect2>
<title>Official Download Location</title>
 
<para><literallayout>Libtool (&libtool-version;):
<ulink url="ftp://ftp.gnu.org/gnu/libtool/">ftp://ftp.gnu.org/gnu/libtool/</ulink></literallayout></para>
</sect2>
<sect2>
<title>Site officiel de téléchargement</title>
 
<para><literallayout>Libtool (&libtool-version;):
<ulink url="ftp://ftp.gnu.org/gnu/libtool/">ftp://ftp.gnu.org/gnu/libtool/</ulink></literallayout></para>
</sect2>
/trunk/lfs/appendixa/lilo-desc.xml
1,19 → 1,19
<sect2><title>Contents of lilo-&lilo-contversion;</title>
 
<sect3><title>Program Files</title>
<para>lilo and mkrescue</para></sect3>
 
<sect3><title>Descriptions</title>
 
<sect4><title>lilo</title>
<para>lilo installs the Linux boot loader which is used to start a Linux
system.</para></sect4>
 
<sect4><title>mkrescue</title>
<para>mkrescue makes a bootable rescue floppy using the existing kernel
and any initial ramdisk.</para></sect4>
 
</sect3>
 
</sect2>
 
<sect2><title>Contenu de lilo-&lilo-contversion;</title>
 
<sect3><title>Programmes</title>
<para>lilo et mkrescue</para></sect3>
 
<sect3><title>Descriptions</title>
 
<sect4><title>lilo</title>
<para>lilo installe le chargeur de boot de Linux, qui est utilisé pour
démarrer un système Linux.</para></sect4>
 
<sect4><title>mkrescue</title>
<para>mkrescue crée une disquette bootable de secours en utilisant un
noyau existant et un ramdisk initial.</para></sect4>
 
</sect3>
 
</sect2>
 
/trunk/lfs/appendixa/m4-down.xml
1,6 → 1,6
<sect2>
<title>Official Download Location</title>
 
<para><literallayout>M4 (&m4-version;):
<ulink url="ftp://ftp.gnu.org/gnu/m4/">ftp://ftp.gnu.org/gnu/m4/</ulink></literallayout></para>
</sect2>
<sect2>
<title>Site officiel de téléchargement</title>
 
<para><literallayout>M4 (&m4-version;):
<ulink url="ftp://ftp.gnu.org/gnu/m4/">ftp://ftp.gnu.org/gnu/m4/</ulink></literallayout></para>
</sect2>
/trunk/lfs/appendixa/glibc-dep.xml
1,23 → 1,23
<sect2>
<title>Dependencies</title>
 
<para>Glibc-&glibc-depversion; needs the following to be installed:</para>
 
<literallayout>
bash: sh
binutils: ar, as, ld, ranlib, readelf
diffutils: cmp
fileutils: chmod, cp, install, ln, mknod, mv, mkdir, rm, touch
gcc: cc, cc1, collect2, cpp, gcc
grep: egrep, grep
gzip: gzip
make: make
mawk: mawk
sed: sed
sh-utils: date, expr, hostname, pwd, uname
texinfo: install-info, makeinfo
textutils: cat, cut, sort, tr
</literallayout>
 
</sect2>
 
<sect2>
<title>Dépendances</title>
 
<para>Glibc-&glibc-depversion; nécessite que les programmes suivants soient installés:</para>
 
<literallayout>
bash: sh
binutils: ar, as, ld, ranlib, readelf
diffutils: cmp
fileutils: chmod, cp, install, ln, mknod, mv, mkdir, rm, touch
gcc: cc, cc1, collect2, cpp, gcc
grep: egrep, grep
gzip: gzip
make: make
mawk: mawk
sed: sed
sh-utils: date, expr, hostname, pwd, uname
texinfo: install-info, makeinfo
textutils: cat, cut, sort, tr
</literallayout>
 
</sect2>
 
/trunk/lfs/appendixa/grep.xml
1,10 → 1,10
<sect1 id="aa-grep">
<title>Grep</title>
<?dbhtml filename="grep.html" dir="appendixa"?>
 
&aa-grep-down;
&aa-grep-desc;
&aa-grep-dep;
 
</sect1>
 
<sect1 id="aa-grep">
<title>Grep</title>
<?dbhtml filename="grep.html" dir="appendixa"?>
 
&aa-grep-down;
&aa-grep-desc;
&aa-grep-dep;
 
</sect1>
 
/trunk/lfs/appendixa/flex-down.xml
1,6 → 1,6
<sect2>
<title>Official Download Location</title>
 
<para><literallayout>Flex (&flex-version;):
<ulink url="ftp://ftp.gnu.org/non-gnu/flex/">ftp://ftp.gnu.org/non-gnu/flex/</ulink></literallayout></para>
</sect2>
<sect2>
<title>Site officiel de téléchargement</title>
 
<para><literallayout>Flex (&flex-version;):
<ulink url="ftp://ftp.gnu.org/non-gnu/flex/">ftp://ftp.gnu.org/non-gnu/flex/</ulink></literallayout></para>
</sect2>
/trunk/lfs/appendixa/grep-desc.xml
1,23 → 1,22
<sect2><title>Contents of grep-&grep-contversion;</title>
 
<sect3><title>Program Files</title>
<para>egrep, fgrep and grep</para></sect3>
 
<sect3><title>Descriptions</title>
 
<sect4><title>egrep</title>
<para>egrep prints lines from files matching an extended regular expression
pattern.</para></sect4>
 
<sect4><title>fgrep</title>
<para>fgrep prints lines from files matching a list of fixed strings,
separated by newlines, any of which is to be matched.</para></sect4>
 
<sect4><title>grep</title>
<para>grep prints lines from files matching a basic regular expression
pattern.</para></sect4>
 
</sect3>
 
</sect2>
 
<sect2><title>Contenu de grep-&grep-contversion;</title>
 
<sect3><title>Programmes</title>
<para>egrep, fgrep et grep</para></sect3>
 
<sect3><title>Descriptions</title>
 
<sect4><title>egrep</title>
<para>egrep affiche les lignes des fichiers correspondant au motif d'une expression
régulière étendue.</para></sect4>
 
<sect4><title>fgrep</title>
<para>fgrep affiche les lignes des fichiers contenant une expression littérale.</para></sect4>
 
<sect4><title>grep</title>
<para>grep affiche les lignes des fichiers correspondant au motif d'une expression
régulière basique.</para></sect4>
 
</sect3>
 
</sect2>
 
/trunk/lfs/appendixa/libtool-dep.xml
1,22 → 1,22
<sect2>
<title>Dependencies</title>
 
<para>Libtool-&libtool-depversion; needs the following to be installed:</para>
 
<literallayout>
bash: sh
binutils: ar, as, ld, nm, ranlib, strip
diffutils: cmp
fileutils: chmod, cp, install, ln, ls, mkdir, mv, rm, rmdir
gcc: cc, cc1, collect2, cpp0
glibc: ldconfig
grep: egrep, fgrep, grep
make: make
sed: sed
sh-utils: echo, expr, hostname, sleep, uname
texinfo: install-info
textutils: cat, sort, tr, uniq
</literallayout>
 
</sect2>
 
<sect2>
<title>Dépendances</title>
 
<para>Libtool-&libtool-depversion; nécessite que les programmes suivants soient installés:</para>
 
<literallayout>
bash: sh
binutils: ar, as, ld, nm, ranlib, strip
diffutils: cmp
fileutils: chmod, cp, install, ln, ls, mkdir, mv, rm, rmdir
gcc: cc, cc1, collect2, cpp0
glibc: ldconfig
grep: egrep, fgrep, grep
make: make
sed: sed
sh-utils: echo, expr, hostname, sleep, uname
texinfo: install-info
textutils: cat, sort, tr, uniq
</literallayout>
 
</sect2>